• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.36-42
• /
• 2006

The analytical realization of uncoupled system was introduced in this study using times series and its spectrum analysis. The ARMAX spectra of time series methods were compared with the conventional FFT spectrum. Also, the response of second order system uncoupled was solved using the Runge-Kutta Gill method. In this numerical analysis, the displacement, velocity and acceleration were calculated. The displacement response among them was used for the power spectrum analysis. The ARMAX algorithm in time series was proved to be appropriate for the mode estimation and spectrum analysis. Using the separate response of first and second mode, each modes were calculated separately and the response of mixed modes was also analyzed for the mode estimation using several time series methods.

• Interaction and multiscale mechanics
• /
• v.2 no.1
• /
• pp.91-107
• /
• 2009

In order to accurately estimate the seismic behavior of buildings, it is important to consider both nonlinear characteristics of the buildings and the frequency dependency of the soil impedance. Therefore, transform methods of the soil impedance in the frequency domain to the impulse response in the time domain are needed because the nonlinear analysis can not be carried out in the frequency domain. The author has proposed practical transform methods. In this paper, seismic response analyses considering frequency dependent soil impedance in the time domain are shown. First, the formulation of the proposed transform methods is described. Then, the linear and nonlinear earthquake response analyses of a building on 2-layered soil were carried out using the transformed impulse responses. Through these analyses, the validity and efficiency of the methods were confirmed.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.73-82
• /
• 2011

This study was performed to analysis the influence of smoke alarm detector on evacuation safety in housing fire. The analysis was conducted by CFAST fire simulation program and building EXODUS evacuation program. The effects of the earlier response time on evacuation safety were investigated by using evacuation simulation program with several steps of different response time and smoke alarm activation time for 4 occupants. The smoke detecter was activated 37.1 second after fire. The first two mortuary were occurred for 170 seconds of response time at the end of living room near exit. But for the 37.1 seconds of response time 4 occupants evacuated safely. From this study, the fire alarm detector is more important for safety evacuation in housing fire.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.5 s.72
• /
• pp.36-41
• /
• 2006

The main object of this study is to develop an accurate and convenient method for the response analysis of offshore structures in real sea states. A numerical procedure is described for predicting the motion responses and tension variations of the ISSC TLP in multi-directional irregular waves. The developed numerical approach in the frequency domain is based on acombination of the three dimensional source distribution method, the dynamic response analysis method, and the spectral analysis method. Frequency domain analysis in the multi-directional irregular waves is expanded to a time domain analysis by using a convolution integral after obtaining the impulse response by Fourier transformation. The results of the comparison between responses in the frequency and time domain confirmed the validity of the proposed approach.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.631-641
• /
• 2020

In the present work, an approach for the multiple time probabilistic characterization of the response of linear structural systems subjected to random non-Gaussian processes is presented. Its fundamental property is working directly on the multiple time probability density functions of the actions and of the response. This avoids of passing through the evaluation of the response statistical moments at multiple time or correlations, reducing the computational effort in a consistent measure. This approach is the extension to the multiple time case of a previously published dynamic Probability Transformation Method (PTM) working on a single evolution of the response statistics. The application to some simple examples has revealed the efficiency of the method, both in terms of computational effort and in terms of accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.8-13
• /
• 2014

The effect of several parameters to minimize the braking response time has been investigated in this study. The experimental rigs were developed and the results of the experement compared with those of simulation obtained from the net work fluid flow system analysis code (FLOWMASTER). The braking response time and pressure loss were observed at separated braking port and found out that the response time can be reduced by considering the pipe length and environmental thermal conditions. The correlation equation was also presented to predict the pressure loss at various tank pressure.

• International Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.43-46
• /
• 2015

Aeroelastic gust response analysis plays an important role in design of aircrafts. For gust response analysis, frequency domain aerodynamics method has been typically used with generalized aerodynamic influence coefficient matrices at various reduced frequencies. However, it cannot be applied to the aeroservoelastic analysis, such as gust alleviation control. Time-domain state space (SS) models must be built. It attacks little attention that gust response analysis relies on continuous gust time-domain input signal in terms of its PSD function. The aim the current study is to provide a reduced-order modeling (ROM) method based on CFD to model gust responses for continuous gust responses for continuou gust inputs in time domain. The paper analyzed the gust response of AGARD445.6 wing subjected to the Dryden gust with ROMs and compared the difference between the rigid structure and elastic one. The results demonstrate that structure elastic effect effect should be considered in the design of aircraft.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.3
• /
• pp.1-8
• /
• 2013

Based on random vibration theory, a procedure for calculating the dynamic response of the tall building to time-dependent random excitation is developed. In this paper, the fluctuating along- wind load is assumed as time-dependent random process described by the time-independent random process with deterministic function during a short duration of time. By deterministic function A(t)=1-exp($-{\beta}t$), the absolute value square of oscillatory function is represented from author's studies. The time-dependent random response spectral density is represented by using the absolute value square of oscillatory function and equivalent wind load spectrum of Solari. Especially, dynamic mean square response of the tall building subjected to fluctuating wind loads was derived as analysis function by the Cauchy's Integral Formula and Residue Theorem. As analysis examples, there were compared the numerical integral analytic results with the analysis fun. results by dynamic properties of the tall uilding.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.506-517
• /
• 2000

In distributed real-time system, a task activated by the completion of its preceding task can be modeled as a periodic task with activation jitter. An activation jitter of a task is defined asthe difference between the worst case and the best case response time of its preceding task. Becausethe existing approaches assume that the best case response time is much smaller than the actual one,the activation jitter and the worst case response time of lower priority tasks are overestimated. Thispaper proposes a new analysis technique to calculate the best case response time more precisely andto reduce the activation jitter bounds. The proposed technique obtains the best case response time byconsidering the relative phase between tasks. The precise analysis of the activation jitters can reducethe worst case response time of other tasks and increase the schedulability. The simulation resultsshow that the proposed analysis technique improves the accuracy of the best case and the worst caseresponse time up to 40% and 6%, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.426-431
• /
• 1998

This, paper describes formulation for time historical response analysis of vibration for tree structure. This method is derived from a combination of the transfer stiffness coefficient method and the Newmark-.betha. method. And This present method improves the computational accuracy of the transient vibration response analysis remarkably owing to several advantages of the transfer stiffness coefficient method. We regarded the structure as a lumped mass system here. The analysis algorithm for the time historical response was formulated for the tree structure. The validity of the present method compared with the transfer matrix method and the FEM(Finite Element Method) for transient vibration analysis is demonstrated through the numerical computations.