• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2013

Maintenance of adequate soil tension or content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil tension and content for precision irrigation would allow optimal soil water condition to crops and minimize the adverse effects of water stress on crop growth and development. This research reports on a comparison of soil water tension and content variations in differently textured soils over time under drip irrigation using two different water management methods, i.e. pulse time and required water irrigation methods. The pulse time-based irrigation was performed by turning the solenoid valve on and off for preset times to allow the wetting front to disperse in root zone before additional water was applied. The required water estimation method was a new water control logic designed by Rural Development Administration that applies the amount of water required based on a conversion of the measured water tension into water content. The use of the pulse time irrigation method under drip irrigation at a high tension of -20 kPa and high temperatures over $30^{\circ}C$ was not successful at maintaining moisture tensions within an appropriate range of 5 kPa because the preset irrigation times used for water control could not compensate for the change in evapotranspiration during day and night. The response time and pattern of water contents for all of the tested soils measured with capacitance-based sensor probes were faster and more direct than those of water tensions measured with porous and ceramic cup-based tensiometers when water was applied, indicating water content would be a better control variable for automatic irrigation. The required water estimation-based irrigation method provided relatively stable control of moisture tension, even though somewhat lower tension values were obtained as compared to the target tension of -20 kPa, indicating that growers could expect to be effective in controlling low tensions ranging from -10 to -20 kPa with the required water estimation system.

• Korean Journal of Environment and Ecology
• /
• v.30 no.1
• /
• pp.130-134
• /
• 2016

How does $CO_2$ affect on the stomatal mechanism? The mechanism of stomatal opening by $CO_2$ is not clear as it is difficult to see $CO_2$ effect on light-induced stomatal opening. Furthermore, stomata may react differently according to the concentration of $CO_2$. The significance of the possible endogenous rhythms must consider to understand on $CO_2$-related response. It is clear that $CO_2$ has an effect on the accumulation of osmotic materials which determines the degree of stomatal apertures because it is known that stomata open in the condition of the reduced $CO_2$ concentration. However, it is not fully understood how $CO_2$ leads to the stomatal opening. It has been thought that $CO_2$ can not affect on the ion fluxes which determines the increase of osmotic potential in guard cells. However, in this study, the changes of guard cell membrane permeability by $CO_2$ have been focused on. There are many reports that $CO_2$ related reactions are dominant when the leaf is exposed to certain a mount of $CO_2$. The hypothesis of the stomatal opening by light is based on the increase of osmotic materials in guard cells including $K^+$, $Cl^-$, sucrose and $malate^{2-}$. It was reported that $CO_2$ induced a big hyperpolarization indicating that $H^+$ was extruded to the cell outside. It was also found that $CO_2$ caused guard cell membrane hyperpolarization in the intact leaf up to 3 or 4 times higher than that of light induced membrane hyperpolarization. These results represent that $CO_2$ can affect on the change of physical characteristics which affects on the change of the membrane permeability.

• Management & Information Systems Review
• /
• v.34 no.5
• /
• pp.191-212
• /
• 2015

Unlike the existing researches related to salespersons, this study intends to place the focus on salespersons' psychological characteristic as an element affecting their selling behavior. This is because employees' psychological characteristic is very likely to affect their devotion and commitment to relationship with customers and long-term production by a company. In particular, salespersons are likely to get a feeling of fatigue or loss, or make a cynical or cold response to customers because of frequent interaction with them, and to show emotional indifference in an attempt to keep their distance from customers. But the likelihood can vary depending on salespersons' own psychological characteristic; in particular, the occurrence of these phenomena is very likely to vary significantly depending on relationship belief in interpersonal relations. In the field of psychology, under way are researches related to personal psychological characteristics to improve the quality of interpersonal relations and to maximize personal performance and enhance situational adaptability during this process; it is a personal relationship belief that is recently mentioned as such a psychological characteristic. For salespersons having frequent interaction with customers, particularly, relationship belief can be a very important element in forming relations with customers. So this study aims at determining how salespersons' relationship belief affects negative emotion regulation strategies and prosocial behavior to customer. As a result, salespersons' relationship belief was found to have effects on their negative emotion regulation strategies and prosocial behavior to customer. Negative emotion regulation strategies was found to have effects on prosocial behavior. Salespersons with intimate relationship belief try to use active regulation, support-seeking regulation and salespersons with controlling relationship belief try to use avoidant/distractive regulation. Intimate relationship belief was found to have more prosocial behavior, controlling relationship belief was found to have less prosocial behavior to customer. salespersons' negative emotion regulation strategies was found to have effects on their prosocial behavior to customer. Active, support-seeking influence prosocial behavior to customer positively, avoidant/distractive regulation influence prosocial behavior to customer negatively.

• Korean Journal of Poultry Science
• /
• v.45 no.3
• /
• pp.201-207
• /
• 2018

An experiment was conducted to investigate the effect of fermented garlic solution (FGS) on the performance, egg quality and blood profiles of laying hens in the finishing period. In total, 432 Lohmann Brown hens aged 79 weeks were equally distributed into four dietary treatments with six replicate. Hens were fed the basal diet containing 2,750 kcal/kg of ME and 16% of CP, which was supplemented with either 0% (control), 0.05%, 0.10% and 0.20% FGS from 79 to 83 weeks old. Laying performance, egg quality, yolk fatty acids and serum characteristics were analyzed at the end of experiment. Egg production and feed conversion was numerically improved in FGS supplementation treatments compared to those in the control, but were not statistically different. The albumen height and Haugh unit showed significant increase (P<0.05) in the FGS supplementation groups. The concentration of saturated fatty acid decreased in the yolks of birds fed FGS (P<0.01), whereas the unsaturated fatty acid (UFA) and mono-UFA contents were significantly higher (P<0.01) in those treatments than in the control. Significantly lower natural fat and cholesterol in serum were observed in birds fed the 0.20% FGS supplementation diet (P<0.01). However, the high-density lipoprotein (HDL) cholesterol increased in both the 0.10% and 0.20% FGS supplementation groups. In addition, interleukin-2 mRNA and CD4+/CD8+ level in serum which were cellular immunity indicators showed statistical differences (P<0.01) among treatments and a higher concentration in the 0.10% and 0.20% FGS groups than in the control. Thus, it can be concluded that dietary supplementation of FGS improved egg quality and stimulated immune response in mature laying hens.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.5
• /
• pp.523-531
• /
• 2006

Background : Cervical tuberculous lymphadenopathy is a very common disease with a similar incidence to pulmonary tuberculosis. Dendritic cells play a role of initial antigen presentation of this illness. Nevertheless, the precise role of these antigen-presenting cells according to the clinical features in unclear. The aim of this study was to determine the clinical implication of dendritic cell infiltration in the cervical lymph nodes. Methods : A review of the clinical characteristics was carried out retrospectively based on the clinical records and radiography. Immunohistochemical staining was performed on the available histology specimens of 72 cases using the S-100b polyclonal antibody for dendritic cells. The number of dendritic cells with tuberculous granuloma were determined. A $X^2$ test, unpaired T test and multiple logistic regression analysis were performed. Results : Thirty percent of subjects had previous or concurrent pulmonary TB. Twenty one percent of cases showed a positive reaction on the AFB stain. Within a granuloma, the number of infiltrated dendritic cells was $113.0{\pm}7.0$. The incidence of fever and cough decreased with increasing infiltration of dendritic cells Multivariate regression analysis showed that the infiltration of dendritic cells could significantly contribute to fever. Conclusion : Overall, dendritic cells can control a Mycobacterium tuberculosis infection and modulate the immune response, as well as resolve the clinical manifestations of TB lymphadenopathy.

• Korean Journal of Animal Reproduction
• /
• v.26 no.3
• /
• pp.299-308
• /
• 2002

In horse, a single gene encodes both eCG and eLH $\beta$ subunits. The difference between eCG and eLH lies in the structure of their glycoresidues, which are both sialylated and sulfated in LH and sialylated in CG eCG consists of highly glycosyiated $\alpha$- and $\beta$-subunits and is an unique member of the gonadotropin family because it elicits response characteristics of both FSH and LH in other species than the horse. This dual activity of eCG in heterologous species is of fundamental interest to the study of gonadotropin structure-function relationships and the understanding of the molecular bases of the specific interactions of these hormones with their receptors. Thus, eCG is a dintinct molecule from the view points of its biological function and glycoresidue structures. The oligosaccharide at Asn 56 of the $\alpha$-subunit plays an indispensable role, whereas the carboxyl-terminal extension of the eCG $\beta$-subunit with its associated O-linked oligosaccharides is not improtant for, the in vitro LH-like activity of eCG. In contrast, both N- and O-linked oligosaccharides play important roles for FSH-like activity and increase FSH-like activity by removal of N- and O-linked oligosaccharides. Therefore, the dual LH- and FSH-like activities of eCG can be clearly separated by removal of either the N-linked oligosaccharide on the $\alpha$-subunit or CTP-associated O-linked oligosaccharides from its $\beta$-subunit. The glycoresidues seem to play crucial roles fer biological activities. The tethered-eCG was effciently secreted and showed similar LH-like activity to the dimeric eCG $\alpha$/ $\beta$ and native eCG. FSH-like activity of the tethered-eCG was also shown similarly in comparison with the native and wild type eCG $\alpha$/ $\beta$. Our data for the first time suggest that the tethered-eCG can be expressed efficiently and the produced product by the CHO-Kl cells is fully LH- and FSH-like activities in rat in vitro bioassay system. Our results also suggest that this molecular can imply particular models ot FSH-like activity not LH-like activity in the eCG. Taken together, these data indicate that the constructs of tethered molecule will be useful in the study of mutants that affect subunit association and/or secretion.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.132-139
• /
• 2005

The major obstacle in the popularization of Chungkookjang is the short shelf-life of $2{\sim}3$ months and some problems concerning storage including the growth of molds even in the products even within shelf-life. To solve these problems we conducted a research to improve its storage by using the vacuumed packaging and sanitary method through seed culture, innoculation and sterilization. For the optimization of storage time, temperature and sterilization temperature, we measured viable cell numbers of bacteria and fungi, amount of gas outbreak and contents of amino type nitrogen and monitored these experimental results by response surface methodology of SAS program, so that we could observe the quality changes of Chungkookjang during shelf-life. Especially fungi, which are the biggest troublemaker in Chungkookjang shelf-life, couldn't be detected from the generally and vacuum-packed samples; also, viable cell numbers were highly influenced by sterilization temperature and in vacuum-packed samples. In the case of vacuum-packed samples, amount of gas outbreak was highly influenced by sterilization temperature of its storage conditions and it was higher in generally packed samples as compared to vacuum-packed samples even at any storage conditions. The changes of pH in generally and vacuum-packed samples were highly influenced by the storage temperature. As the temperatures of storage and sterilization were higher and the storage time was longer, so the amount of gas outbreak was accordingly lower. These results showed that amino type nitrogen contents in generally and vacuum-packed samples were systematically influenced by the temperature, storage time and sterilization temperature. Also the result showed that the change of amino type nitrogen contents during storage was less in vacuum-packed samples than in general ones. Based on the above results, we can produce Chungkookjang products with extended shelf-life of as far as 6 months without any quality change using sanitary manufacturing method, vacuumed packaging condition, sterilization in $70^{\circ}C$ for 60 minutes and storage under $10^{\circ}C$ during shelf-life. According to this research, we have the possibility to greatly increase the goods value of Chungkookjang by developing the manufacture processing and packaging.

• Journal of Korean Academy of Nursing
• /
• v.3 no.3
• /
• pp.1-14
• /
• 1973

This study is designed to meet the following objectives: (1) To study attitude and behavior regarding marriage and age at marriage, (2) To learn correlates of age at marriage and to examine their relations, (3) To measure relative importance of the correlates of age at marriage, and (4) To study relations of age at marriage and family planning practice to fertility and their relative importance as correlates of fertility. The data are obtained by an independent cross-sectional survey in three study areas purposively selected to represent metropolitan. semihuman. rural population. The study population is confined to women age 17-50 as of survey. The overall response rate is 90%. Reliability of data is measured by . individual and aggregate inconsistency based upon a 15% subsample of the original interviews. The individual inconsistency (31%) is found to be high compared to the aggregate inconsistency (6%) for all 85 variables. However, the magnitude of differences between means is small, and the mean absolute shifts and proportional shifts are also small on the whole. In a word respondents did not change their answers too extremely or radically. The study populations of each study area are compared on some basic characteristics. It is found that the three study populations have more dissimilarities than similarities. The findings on seven different attitudinal positions of women toward marriage indicate that there have been tremendous changes in all study areas Iron "traditional" attitudes which have been prevalent for a long time in Korean society to "liberalized" or "modernized" attitudes. An apparent tendency is that women generally take a position of a "golden mean" attitude by not preferring either extreme of marriage attitudes. Nevertheless, the young, single, educated, and urbanite appears more "liberalized. " There has been some increase in ideal age at marriage from 1958 to 1970 for both sexes. No age group, marital status, or study area differentials in ideal age at marriage are found, the average ideal age at marriage in every sub-group being 24-25. Awareness of existing legal marriageable ages is low; only 4.4% are aware that "with parental permission: minimum age for males is 18 years and for females 16 years,"and only 3.7% are aware that "without parental permission: 27 years for males and 23 years for females." People in Korra tend to marry spouses who are in various social ways like themselves: the similarities include (a) education, occupational status of father, (c) economic status, (d) usual residence before marriage, and (e) religion. Both singulars and actual mean ages at marriage in this study confirm the trend of rising age at marriage previously established by other independent studies. The urban-rural differential in age at marriage is observed, but the differential narrows down gradually from 1935 to 1970. All socio-economic, demographic, and other variables pertaining to wife before and at first marriage, excluding (a) religion, (b) father′s of occupation, and (c) as: of menarche, are correlated with respondent's age at first marriage, whereas only three variables out of all socio-economic variables relating to husband before and at wife′s first marriage, viz., (a) education, (b) usual residence, and (c) economic level of his old home, are correlated with respondent′s age at marriage. Among socio-economic and modernity variables related to either husband or wife at the time of survey, only education and duration of residence are correlated with wife′s age at first marriage. Among the correlates of respondent′age at first marriage, education is in general the most important variable. However, it is found that wife′s education is more important than husband′s. The combined effects or the correlates studied explain no more than about 40% of variance for any of the selected groups of variables. Points which might counteract the effects of late marriage on fertility are not serious in Korea. For each of the correlates of the three fertility indices chosen for this study. namely, (a) number of living children, (b) number of live births, and (c) number of pregnancies, age at marriage is the major contributor to the variance in all age groups except the age group of 20-29 in which the index of family planning practice is the major contributor. The proportion of variability in fertility indices accounted for by the correlates is never more than 40% of the total variance in any age group. Based upon the findings from this study, it could be concluded that in the foreseeable future (a) celibate group will no! be increased to a point that would slow down population growth rate in Korea, (b) age at marriage will not increase continually, (c) although education stands out as the major contributing variable which independently explains the variation in age at marriage, it seems probable that education may not be the major variable in the near future, and (d) despite the fact found by this study that age at marriages has been the major contributor to the variance of each of the fertility indices used, family planning practice will play a more important role in the reduction of fertility in the Korean society. Therefore, factors interrupting practice of family planning must be eliminated and family planning program should be strengthened if further fertility reduction is needed.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Journal of Venture Innovation
• /
• v.1 no.1
• /
• pp.49-65
• /
• 2018

For a long time the German economy was primarily defined by large corporations and thriving small and medium-sized enterprises. Since about 2005 a second strand has started to emerge and it is one which is becoming increasingly important and is creating jobs - start-ups in the digital sector. This start-up activity is taking an important role in Germany's economic development: Start-up companies spawn innovations and create jobs, thus promoting the concept of competition. In general "start-up" refers to digitally-driven companies that are not more than five years old. Germany's start-up policy consists of three main parts. First of all, Germany has the characteristics of technology-based start-ups. The Hartz reform since 2002 has shown its focus on technology-based start-ups. In particular, it is the most appropriate for a start-up company to take the role of a new technology company to respond to changes in the global industrial structure. Second, it is approaching from a long-term perspective. In this regard, the small business policy, including Germany's new business policy, is seen as a tradition that can be consistent and can make policy decisions based on the basics rather than following the times. Third, the government is implementing policies centered on demand. Germany's start-up policy is summarized as a technology-based policy and new job creation. The policy response is that the government seeks the best combination of policies by adapting them to the times from the broad trend of employment market policies. What is important here is that policies are made based on consumers, not suppliers, in the process of policy making and implementation. With the Digital Agenda 2020 the Federal government has likewise committed itself to preparing the digital economy for international competition and making Germany the "No. 1 digital growth country in Europe". Ever since 1998 the Federal Ministry for Economic Affairs and Energy (BMWi) has awarded the "EXIST" start-up scholarship to students and graduates. The Ministry also invests in the High Tech start-up fund. Together with Kreditanstalt für Wiederaufbau (KfW) and 18 other investors from the world of business the seed investor promotes young technology companies. Germany offers start-ups a good infrastructure and lots of funding opportunities. Berlin is regarded as Europe's start-up capital and also attracts lots of international young entrepreneurs.