• 펄프종이기술
• /
• 제32권2호
• /
• pp.1-7
• /
• 2000

In the previous experiment, it was found that OCC pre-treatment with Hobart mixer at 20-25％ consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, com-pared to the no pre-treated, when the same refining time was applied. WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.69-69
• /
• 2000

In the previous experiment, it was found that OCC pre-treatment with Hobat mixer at 20-25% consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, compared to the no pre-treated, when the same refining time was applied WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.

• 한국재료학회지
• /
• 제25권7호
• /
• pp.341-346
• /
• 2015

The feasibility of obtaining graphitic carbon films on targeted substrates without a catalyst and transfer step was explored through the pyrolysis of the botanical derivative camphor. In a horizontal quartz tube, camphor was subjected to a sequential process of evaporation and thermal decomposition; then, the decomposed product was deposited on a glass substrate. Analysis of the Raman spectra suggest that the deposited film is related to unintentionally doped graphitic carbon containing some $sp-sp^2$ linear carbon chains. The films were transparent in the visible range and electrically conductive, with a sheet resistance comparable to that of graphene. It was also demonstrated that graphitic films with similar properties can be reproduciblyobtained, while property control was readily achieved by varying the process temperature.

• 소성∙가공
• /
• 제13권8호
• /
• pp.671-677
• /
• 2004

For the large reduction in tube cross section, the tube drawing process is usually performed by two successive passes, so called first drawing and second drawing. In multi-pass drawing process, the reduction balance is important to prevent drawing cracks. Therefore in this study, the model for uniform reduction distribution in two-pass drawing process has been developed on the basis of cross sectional variation of drawn tube. For the given product geometry the model provides optimal diameter and thickness that can evenly distribute drawing reductions. The capability of model is well confirmed by finite element analysis of tube drawing process. Criteria curves at various limit strains to determine whether the drawn tube would fail during drawing process are also proposed by using newly developed model.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.5-32
• /
• 2000

MRAM, High performance MRAM using MTJS demostrated, fully integrated MTJ MRAM with CMOS circuits, write time ~2.3 nsec; read time ~3 nsec, Thermally stable up to ~350 C, Switching field distibution controlled by size & shape. Magnetic Tunnel Junction Properties, Magnetoresistance: ~50% at room temperature, enhanced by thermal treatment, Negative and Positive MR by interface modification, Spin Polarization: >55% at 0.25K, Insensitive ot FM composition, Resistance $\times$ Area product, ranging from ~20 to 10$^{9}$ $\Omega$(${\mu}{\textrm}{m}$)$^{2}$, Spin valve transistor, Tunnel injected spin polarization for "hot" electrons, Decrease of MTJMR at high bias originates from anode.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.129-133
• /
• 2021

This study observed the performance of an InAs/GaSb type-II superlattice photodiode with a p-i-n structure for mid-wavelength infrared detection. The 10 ML InAs/10 ML GaSb type-II superlattice photodiode was grown using molecular beam epitaxy. The cutoff wavelength of the manufactured photodiode with Si3N4 passivation on the mesa sidewall was determined to be approximately 5.4 and 5.5 ㎛ at 30 K and 77 K, respectively. At a bias of -50 mV, the dark-current density for the Si3N4-passivated diode was measured to be 7.9 × 10-5 and 1.1 × 10-4 A/㎠ at 77 K and 100 K, respectively. The differential resistance-area product RdA at a bias of -0.15 V was 1481 and 1056 Ω ㎠ at 77 K and 100 K, respectively. The measured detectivity from a blackbody source at 800 K was calculated to be 1.1 × 1010 cm Hz1/2/W at zero bias and 77 K.

• 농약과학회지
• /
• 제14권2호
• /
• pp.123-132
• /
• 2010

국내 난방제 해충의 하나인 배추좀나방(Plutella xylostella)을 방제하기 위하여 사용되어온 상업용 Bacillus thuringiensis 제품들을 이용하여 국내 6개 지역에서 채집한 지역계통과 2개의 감수성계통 배추좀나방에 대한 저항성 발달정도를 검토하였다. 상품화된 B. thuringiensis subsp. kurstaki 계통인 Tyuneup$^{(R)}$, Thuricide$^{(R)}$, Geumulmang$^{(R)}$ 등 3제품과 B. thuringiensis subsp. aizawai 계통인 Tobagi$^{(R)}$, Scorpion$^{(R)}$ 등 2제품을 이용하였다. 공시충으로 사용된 배추좀나방은 계대사육중인 감수성개체군 NP와 GR 2종류이며, 전국의 배추밭에서 채집한 SP, HS, NM, DR, HC, HW개체군 등 6종류를 야외 개체군으로 사용하였다. Tyuneup$^{(R)}$ 제품의 생물검정에서 감수성 계통인 고령지시험장계통의 GR과 비교해 SP 개체군은 4.8배를 그리고 HS 개체군은 2.5배의 저항성발달을 보였다. Geumulmang$^{(R)}$ 제품의 경우에는 감수성계통인 NP 개체군에 비하여 SP 개체군에서 9.9배와 NM 개체군에서 6.8배정도의 저항성을 나타냈다. Tobagi$^{(R)}$는 HS 개체군에서 GR 개체군에 비해 14배의 저항성을 보여 가장 높게 나타났다. 그러나 동일 계통의 Scorpion$^{(R)}$은 SP 개체군에 약 2배정도의 저항성을 보여주고 있을 뿐이다. 이러한 결과는 어떤 특정한 B. thuringiensis 제품이 특정지역에 집중적으로 계속 사용함으로서 저항성이 발달되는 것으로 판단되며 종류가 다른 B. thuringiensis 제품을 교호 살포해야 할 것으로 사료된다. 그러나 Tobagi$^{(R)}$에 14배의 저항성 발달을 보인 HS 개체군을 실험실에서 동일약제에 연속으로 노출시켰을 때 $F_2$세대에서는 급격히 저항성 수치가 떨어져 1.1로 나타나 저항성 기작의 검토가 필요하다.

• 공업화학
• /
• 제19권3호
• /
• pp.310-315
• /
• 2008

본 연구에서는 실리카 코팅을 통하여 높은 내약품성을 갖는 황연입자를 제조하였다. 합성 과정에 수중 분산도 향상을 위한 중간체 제조의 최적화와 제조된 실리카로 코팅된 황연입자의 내약품성을 조사하였다. 합성과정에서 입자 생성에 가장 영향이 높은 변수인 pH와 반응온도에 따른 입자경의 변화를 관찰하였으며, homogenizer 이용하여 변화된 입자경에 따른 실리카 코팅에의 영향, 코팅 후 온도 및 pH의 변화에 따른 입자형상의 변화를 관찰하였다. 실험 결과로, 황연안료의 합성공정에서 생성용액의 pH가 낮을수록 합성 및 숙성온도가 높을수록 작고 균일한 입자를 얻을 수 있었다. 황연입자의 코팅 전 입자경이 작을수록 실리카 코팅이 우수하였다. 또한 충분한 마이크로캡슐화에 의한 실리카 코팅은 pH 9~10 및 반응온도 $90^{\circ}C$ 이상에서 얻을 수 있었다.

• 한일민족문제연구
• /
• 제32호
• /
• pp.215-275
• /
• 2017

In the absence of the alternative public space of women in Japan, the experience of the "Bongseonhwa" was interpreted as the public domain of Japanese society as a public domain, a confession that focused on gender discrimination in the patriarchal system of Japan, Most of the enemy discourse is. These alienated discourses are the product of the efforts of women in Japan who do not want to forget about the traces and memories that can not be incorporated into the big narrative. It can not be denied that the women in the society of Japan have been excessively excluded and alienated by national ideology and patriarchal ideology. The meaning of presenting them through "Bongsinghwa" is the resistance of the minority, and it is the expression way of reconstructing and strengthening the identity of the women, and it is said to be a space of symbolic meaning. It is further clarified that it is based on a narrative that creates a new life area for coexistence with Japanese society, on the other hand, by constantly searching for the linkage with the motherland, held by women in Japan. As a result, between public social phenomena and private living space, confirmed that it conflicts with repetitive internal contradiction of controlling power and confirmed that complicated and detailed material of women living in Japan who undergo double discrimination What has been expressed over a period is considered to be a resistance expression and a will of expression of reconciliation to coexist with Japanese society. I have attempted to analyze the confessed alienated discourse of "Bongsinghwa" by classifying it as . As a result, it is confirmed that the public social phenomenon and the private life space are confronted with the repetitive internal contradictions of the power of domination, and the expression of the complex and detailed material of the discriminated women in Japan over a long period of time is a resistance to symbiosis with Japanese society And the will of the conversation.

• Journal of the Korean Wood Science and Technology
• /
• 제52권1호
• /
• pp.70-86
• /
• 2024

Termites are a serious threat to wood-based products in Indonesia. This study investigated the termite resistant property of glulam made from polystyrene-modified wood. Three tropical fast-growing wood species, namely mangium (Acacia mangium), manii (Maesopsis eminii), and rubberwood (Hevea brasiliensis), were prepared for flat-sawn laminae. After getting air-dried condition, the laminae were impregnated with polystyrene using potassium peroxydisulphate as a catalyst followed by polymerization at 80℃. Polystyrene-impregnated and control glued-laminated lumbers (glulams) were manufactured, and solid wood was provided. Three wood species and three wood products with six replicates were exposed in a field in Bogor, Indonesia, for four months, and before the tests, their density and moisture content were measured. At the end of the field tests, the weight loss and protection levels of each test sample were determined. A completely randomized factorial design was used for data analysis. The weight percentage gains for mangium, manii, and rubberwood were 22.30%, 18.22%, and 10.44%, respectively. The results showed that manii belonged to low-density wood, whereas the other two woods were medium-density wood, and the moisture content was the ambient moisture content, typical of the Bogor area. Regarding weight loss and protection level, mangium was the most durable against subterranean termite attacks, followed by rubberwood and manii. Among the wood products, the polystyrene-impregnated glulam presented the highest durability, followed by the control glulam and solid wood. Therefore, mangium and rubberwood polystyrene-impregnated glulams are recommended for future product development.