• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.12
• /
• pp.982-987
• /
• 2011

In this study, $Ge_8Se_{(2+x)}Te_{(6-x)}$ thin film amorphous-to-crystalline phase-change rate was evaluated in using a nano-pulse scanner. The focused laser beam with a diameter <10 ${\mu}m$ was illuminated in the power (P) and pulse duration (t) ranges of 1-31 mW and 10-460 ns, respectively, with subsequent detection of the responsive signals reflected from the film surface. We also evaluated the material characteristics, such as optical absorption and energy gap, crystalline phases, and sheet resistance of as-deposited and annealed films. The result of experiments showed that the thermal stability of the Ge-Se-Te film is largely improved by adding Se.

• Journal of Digital Contents Society
• /
• v.13 no.1
• /
• pp.75-81
• /
• 2012

SSDs(Solid State Drives) have many attractive features such as high performance, low power consumption, shock resistance, and low weight, so they replace HDDs to a certain extent. An SSD has FTL(Flash Translation Layer) which emulate block storage devices like HDDs. A garbage collection, one of major functions of FTL, effects highly on the performance and the lifetime of SSDs. However, there is no de facto standard for new garbage collection algorithms. To solve this problem, we propose trace driven offline optimal algorithms for garbage collection of FTL. The proposed algorithm always guarantees minimal number of erase operation. In addition, we verify our proposed algorithm using TPC trace.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.15.2-15.2
• /
• 2011

비휘발성 저항 메모리소자인 resistance random access memory (ReRAM)는 간단한 소자구조와 빠른 동작특성을 나타내며 고집적화에 유리하기 때문에 차세대 메모리소자로써 각광받고 있다. 현재, 이성분계 산화물, 페로브스카이트 산화물, 고체 전해질 물질, 유기재료 등을 응용한 저항 메모리소자에 대한 연구가 활발히 진행되고 있다. 그 중 ZnO를 기반으로 하는 amorphous InGaZnO (a-IGZO) 박막은 active layer 로써 박막트랜지스터 적용 시 우수한 전기적 특성을 나타내며, 빠른 동작특성과 높은 저항 변화율을 보이기 때문에 ReRAM 에 응용 가능한 재료로써 기대되고 있다. 또한 가시광선 영역에서 광학적으로 투명한 특성을 보이기 때문에 투명소자로서도 응용이 기대되고 있다. 본 연구에서는 indium tin oxide (ITO) 투명 전극을 적용한 ITO/a-IGZO/ITO 구조의 투명 소자를 제작하여 저항 메모리 특성을 평가하였다. Radio frequency (RF) sputter를 이용하여 IGZO 박막을 합성하고, ITO 전극을 증착하여 투명 저항 메모리소자를 구현하였고, resistive switching 효과를 관찰하였다. 또한, 열처리를 통해 a-IGZO 박막 내의 Oxygen vacancy와 같은 결함의 정도에 따른 on/off 저항의 변화를 관찰할 수 있었다. 제작된 저항 메모리소자는 unipolar resistive switching 특성을 보였으며, 높은 on/off 저항의 차이를 유지하였다. Scanning electron microscope (SEM)을 통해 합성된 박막의 형태를 평가하였고, X-ray diffraction (XRD) 및 transmission electron microscopy (TEM)을 통해 결정성을 평가하였다. 제작된 소자의 전기적 특성은 HP-4145 를 이용하여 측정하고 비교 분석하였다.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.317-327
• /
• 2014

In order to develop nano-devices with much lower power consumption for beyond-CMOS applications, the fundamental understanding and precise control of the electronic properties of ultrathin transition metal oxide (TMO) films are strongly required. The metal-insulator transition (MIT) is not only an important issue in solid state physics, but also a useful phenomenon for device applications like switching or memory devices. For potential use in such application, the electronic structures of MIT, observed for TMO nano-structures, have been investigated using a synchrotron radiation angle-resolved photoelectron spectroscopy system combined with a laser molecular beam epitaxy chamber and a scanning photoelectron microscopy system with 70 nm spatial resolution. In this review article, electronic structures revealed by soft X-ray nano-spectroscopy are presented for i) polarity-dependent MIT and thickness-dependent MIT of TMO ultrathin films of $LaAlO_3/SrTiO_3$ and $SrVO_3/SrTiO_3$, respectively, and ii) electric field-induced MIT of TMO nano-structures showing resistance switching behaviors due to interfacial redox reactions and/or filamentary path formation. These electronic structures have been successfully correlated with the electrical properties of nano-structured films and nano-devices.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.57-63
• /
• 1994

Aluminum oxide($Al_2{O_3}$) offers some unique advantages over the conventional silicon dioxide( $SiO_{2}$) gate insulator: greater resistance to ionic motion, better radiation hardness, possibility of obtaining low threshold voltage MOS FETs, and possibility of use as the gate insulator in nonvolatile memory devices. We have undertaken a study of the dielectric breakdown of $Al_2{O_3}$ on Si deposited by GAIVBE technique. In our experiments, we have varied the $Al_2{O_3}$ thickness from 300.angs. to 1400.angs. The resistivity of $Al_2{O_3}$ films varies from 108 ohm-cm for films less than 100.angs. to 10$_{13}$ ohm-cm for flims on the order of 1000.angs. The flat band shift is positive, indicating negative charging of oxide. The magnitude of the flat band shift is less for negative bias than for positive bias. The relative dielectric constant was 8.5-10.5 and the electric breakdown fields were 6-7 MV/cm(+bias) and 11-12 MV/cm (-bias).

• Tribology and Lubricants
• /
• v.27 no.1
• /
• pp.7-12
• /
• 2011

Interest in advanced machining process such as AJM(abrasive jet machining) and CMP(chemical-mechanical polishing) using micro/nano-sized abrasives has been on the increasing demand due to wide use of super alloys, composites, semiconductor and ceramics, which are difficult to or cannot be processed by traditional machining methods. In this paper, the effects of pressure, wafer moving velocity and fluid viscosity were investigated by 2-dimensional finite element analysis method considering slurry fluid flow. From the investigation, it could be found that the simulation results quite corresponded well to the Preston's equation that describes pressure/velocity dependency on material removal. The result also revealed that the stress and corresponding material removal induced by the collision of particle may decrease under relatively high wafer moving speed due to the slurry flow resistance. In addition, the increase in slurry fluid viscosity causes the reduction of material removal rate. It should be noted that the viscosity effect can vary with the shape of abrasive particle.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.47-51
• /
• 2001

To obtain high remnant polarization and good crystalinity of ferroelectric thin films in non-volatile memory devices, the high temperature treatment in oxygen ambient is inevitable. Severe problems that occur in this process are oxygen diffusion into substrate, oxidation of electrode and buffer layer, degradation of microstructure and so on. We made ruthenium dioxide thin film by reactive sputtering with oxygen and argon mixture atmosphere. Comparing quantitatively the core-level spectra of Ru and RuO$_2$ obtained by x-ray photoelectron spectroscopy(XPS), we found that chemical state of RuO$_2$ is very stable and of good resistance to oxygen diffusion and oxidation of adjacent layers. It opens the use of RuO$_2$ thin film as a multifunctional layer of good conducting electrode and resistive barrier for the diffusion and the oxidation. We also suggest a correct understanding of Ru 3d core-level spectrum for RuO$_2$ based on the scheme of final state screening and charge transfer satellites.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.78.1-78.1
• /
• 2012

비 휘발성 저항 메모리소자인 resistance random access memory (ReRAM)는 빠른 동작특성과 저 전압 특성을 나타내고 비교적 간단한 소자구조로 고집적화에 유리하여 기존의 DRAM과 flash 메모리, SRAM 등이 갖고 있는 한계를 극복할 수 있는 차세대 메모리소자로써 각광받고 있다. 현재, 이성분계 산화물, 페로브스카이트 산화물, 고체 전해질 물질, 유기재료 등을 응용한 저항 메모리소자에 대한 연구가 활발히 진행되고 있다. 그 중 ZnO 를 기반으로 하는 amorphous InGaZnO (a-IGZO) 박막은 저온에서 대면적 증착이 가능하며 다른 비정질 재료에 비해 높은 전하 이동도를 갖기 때문에 박막트랜지스터 적용 시 우수한 전기적 특성을 나타낸다. 또한 빠른 동작특성과 높은 저항 변화율을 보이기 때문에 ReRAM에 응용 가능한 재료로써 기대되고 있다. 본 연구에서는 MOM(metal/oxide/metal) 구조를 기반한 TiN/a-IGZO/ITO 구조의 소자를 제작하여 저항 메모리 특성을 평가하였다. IGZO 박막은 radio frequency (RF) sputter 를 이용하여 ITO/glass 기판 위에 증착하였다. MOM 구조를 위한 상부 TiN 전극은 e-beam evaporation 을 이용하여 증착하였다. 제작된 저항 메모리소자는 안정적인 unipolar resistive switching 특성을 나타내었으며, TiN 상부전극과 IGZO 계면 간의 Transmission Electron Microscopy (TEM) 분석을 통해 전압 인가 후 전극 금속 물질의 박막 내 삽입으로 인한 금속 필라멘트의 형성을 관찰 할 수 있었다. 합성된 박막의 형태와 결정성은 Scanning electron microscope (SEM)와 X-ray Diffraction (XRD)을 통해 평가 하였으며, 제작된 소자의 전기적 특성은 HP-4145 를 이용하여 측정하고 비교 분석하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.190-193
• /
• 2006

Gadolinium-substituted bismuth titanate, $Bi_{3.3}Gd_{0.7}Ti_{3}O_{12}$, thin films were successfully fabricated on Pt(111)/Ti/$SiO_2$/Si(100) substrates by a MOCVD process. Fabricated BGT thin films were found to be random oriental ions, which were confirmed by X-ray diffraction and scanning electron microscope analysis. The remanent polarization value ($2P_r$) of the BGT thin film annealed at $720^{\circ}C$ was $45.13{\mu}C/cm^2$, at an applied voltage of 5 V. The BGT thin film exhibits a good fatigue resistance up to $1{\times}10^{11}$ switching cycles at a frequency of 1 MHz with applied voltage of 5 V. These results indicate that the randomly oriented BGT thin film is a promising candidate among ferroelectric materials useful in lead-free nonvolatile ferroelectric random access memory applications.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.31-36
• /
• 2002

The 2nd level solder joint reliability of 153 FC-BGA for high-speed SRAM (Static Random Access Memory) with the large chip on laminate substrate comparing to PBGA(Plastic Ball Grid Array) was studied in this paper. This work has been done to understand an influence as the mounting with single side or double sides, structure of package, properties of underfill, properties and thickness of substrate and size of solder ball on the thermal cycling test. It was confirmed that thickness of BT(bismaleimide tiazine) substrate increased from 0.95 mm to 1.20 mm and solder joint fatigue life improved about 30% in the underfill with the low young's modulus. And resistance against the solder ball crack became twice with an increase of the solder ball size from 0.76 mm to 0.89 mm in solder joints.