• 대한방사선방어학회:학술대회논문집
• /
• 대한방사선방어학회 2009년도 춘계 학술발표
• /
• pp.124-125
• /
• 2009

See Full Text

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 2000년도 한국생물과학협회 학술발표대회
• /
• pp.108.2-108
• /
• 2000

No Abstract, See Full Text

• 한국축산시설환경학회지
• /
• 제8권2호
• /
• pp.79-86
• /
• 2002

This study was conducted to collect basic data about the effects of ventilation types on the interior environment of the enclosed farrowing-nursery pig house in Anseong, Icheon and Jeungpyong. Surveyed ventilation types in the enclosed farrowing-nursery pig house are classified in to 4 types. In V1 type, air enters through a planar slot inlet placed on the juncture of the entering wall and exit through the chimney fan outlet; in V2 type, air enters through a perforated ceiling inlet and exits chimney fan outlet(V2); in V3 type, air enters through a circular duct inlet and exit chimney fan outlet(V3); in V4 type, enters through a circular duct inlet and exits side wall exhaust fan outlet(V4). Temperature, relative humidity, air velocity and ammonia concentration($NH_3$) were measured in the interior of swine building in the summer. Interior temperature was not remarkably different in all ventilation types in this study. However, temperature of the V4 was somewhat lower than that of the other types. Air velocity of the V4 was higher and $NH_3$ concentration of the V4 was lower than those of other ventilation types. It is suggested that the V4 ventilation type be applicable in the enclosed farrowing-nursery pig house in Korea.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권7호
• /
• pp.4199-4203
• /
• 2013

Background: This investigation focused on possible relationships between skin cancers and ABO/Rh blood groups. Materials and Methods: Between January 2005 and December 2012, medical data of 255 patients with skin cancers who were admitted to Kayseri Training and Research Hospital, Radiation Oncology and Plastic Surgery Outpatient Clinics were retrospectively analyzed. Blood groups of these patients were recorded. The control group consisted of 25701 healthy volunteers who were admitted to Kayseri Training and Research Hospital, Blood Donation Center between January 2010 and December 2011. The distribution of the blood groups of the patients with skin cancers was compared to the distribution of ABO/Rh blood groups of healthy controls. The association of the histopathological subtypes of skin cancer with the blood groups was also investigated. Results: Of the patients, 50.2% had A type, 26.3% had O type, 16.1% had B type, and 7.5% had AB blood group with a positive Rh (+) in 77.3%. Of the controls, 44.3% had A type, 31.5% had 0 type, 16.1% had B type, and 8.1% had AB blood group with a positive Rh (+) in 87.8%. There was a statistically significant difference in the distribution of blood groups and Rh factors (A Rh (-) and 0 Rh positive) between the patients and controls. A total of 36.8% and 20.4% of the patients with basal cell carcinoma (BCC) had A Rh (+) and B Rh (+), respectively, while 39.2% and 27.6% of the controls had A Rh (+) and B Rh (+), respectively. A significant relationship was observed between the patients with BCC and controls in terms of A Rh (-) (p=0.001). Conclusion: Our study results demonstrated that there is a significant relationship between non-melanoma skin cancer and ABO/Rh factors.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.414-423
• /
• 2015

Fishing trend and characteristics of Korean tuna purse seine fishery in the Pacific Ocean were investigated using logbook data compiled from captain onboard and the statistical data from 1980 to 2013. The historical catch of this fishery had sharply increased since mid-1980s, and it has shown fluctuations with about 2-3 hundred thousands, whereas the catch per number of vessel has steadily increased with fluctuations since commencing this fishery. As for the proportion of catch by set type, unassociated type had increased from the mid-1980s to the end of 1990s, and then has decreased up to 2010s. Associated type had decreased continually to the end of 1990s, however, it started to increase since the beginning of 2000s. As for the catch proportion of set type by main species, those of skipjack tuna and bigeye tuna showed higher in the associated type, whereas that of yellowfin tuna has the highest proportion in the unassociated type. Fishing distribution of Korean tuna purse seine fishery was concentrated on the area of $5^{\circ}N{\sim}10^{\circ}S$ and $140^{\circ}E{\sim}180^{\circ}$ through the decades. The monthly catch distribution by longitudinal zone of Korean tuna purse seine fishery expanded the most further to the eastward in September to October.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.535-542
• /
• 2013

To enhance the performance of SEWGS system by holding the WGS catalyst in a SEWGS reactor using bed inserts, effect of bed insert geometry on CO conversion of WGS catalyst was measured and investigated. Small scale fluidized bed reactor was used as experimental apparatus and tablet shaped WGS catalyst and sand particle were used as bed materials. The cylinder type and the spring type bed inserts were used to hold the WGS catalysts. The CO conversion of WGS catalyst with the change of steam/CO ratio was determined based on the exit gas analysis. Moreover, gas flow direction was confirmed by bed pressure drop measurement for each case. The measured CO conversion using the bed inserts showed high value comparable to previous results even though at low catalyst content. Most of input gas flowed through the bed center side when we charged tablet type catalyst into the cylinder type bed insert and this can cause low $CO_2$ capture efficiency because the possibility of contact between input gas and $CO_2$ absorbent is low in this case. However, the spring type bed insert showed good reactivity and good distribution of gas, and therefore, the spring type bed insert was selected as the best bed insert for SEWGS process.

• 생태와환경
• /
• 제40권2호
• /
• pp.214-222
• /
• 2007

본 연구에서는 국내 분포하고 있는 490개 저수지를 대상으로 유역특성과 수질과의 관계를 조사하였고, TSI편차분석을 통해 유형을 구분하여 영양염 측면에서의 각 유형별 특성을 조사하였다. 본 연구 대상저수지에서 수심이 얕을수록 부영양화 가능성이 높게 나타났다. 유역 내 논과 밭의 이용면적이 30%이상인 경우 수체 내 TP농도는 평균 0.1 mg $L^{-1}$ 이상이었다. TN 농도는 유역전체면적 중 논의 면적이 25% 이상인 경우에 평균 2.6 mg $L^{-1}$이상의 분포를 나타냈다. TSI편차를 통해 구분된 형태 중 TYPE III에 해당하는 저수지의 수질항목별 평균 농도는 다른 두 형태에 포함된 저수지에서 보다 2배 이상 높은 수준이었다. TYPE III에 포함된 저수지는 다른 두 유형에 포함된 저수지와 비교해 부영양상태이고, 수심이 얕으며, 수표면적에 대한 유역면적비 (DA/RA)가 작고, 논과 밭으로의 이용면적이 넓었다. TYPE I과 II에 포함된 저수지의 수질은 TYPE II에서 BOD와 엽록소 ${\alpha}$농도가 높은 것을 제외하고는 유사한 수준이었고, 형태학적 특성(평균수심, DA/RA)이나 토지이용형태 또한 유사하였다. TYPE I에 포함된 저수지들에서는 인이 조류성장에 대한 일차적인 제한요인은 아닌 것으로 나타났다. 본 연구에서 모든 대상저수지에서 인의 제한가능성이 나타났으며, 토지이용형태, 특히 유역 내 논과 밭으로의 이용면적은 저수지의 수질을 결정하는 매우 중요한 인자였다.

• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• 환경영향평가
• /
• 제22권3호
• /
• pp.195-201
• /
• 2013

Local governments are establishing their own greenhouse gas reduction goal and are playing a important role to respond to climatic changes. However, there are difficulties in quantitative analyses such as estimation of future greenhouse gas emission and computation of reduction potential, which are procedures required to establish mid to long term strategies to realize of low carbon society by each local governments. Also, reduction measures must reflect characteristics of each local government, since the reduction power of each local government can differ according to characteristics of each. In order to establish strategies that reflect characteristics of local governments, types of greenhouse gas emission from cities were classified largely into residential city, commercial city, residential commercial city, agriculture and fishery city, convergence city, and industrial city. As a result of analyzing basic unit of greenhouse gas emission by local government during 2007 in terms of per population, household and GRDP based on the type classification, significant results were deduced for each type. To manage the amount of the national greenhouse gas, reduction measures should be focused on the local governments that emits more than the average of each type's GHG emission.

• 식물병연구
• /
• 제22권4호
• /
• pp.297-302
• /
• 2016

토마토황화잎말림바이러스(TYLCV)는 토마토에서 큰 경제적 손실을 초래하는 바이러스 병이다. 이병은 약제방제가 되지 않기 때문에 매개충인 담배가루이를 방제하거나 저항성 품종을 재배해야 한다. 본 시험은 시중에 유통 중인 토마토 품종에 대해 토마토황화잎말림바이러스에 저항성을 평가하였다. 토마토 품종별로 TYLCV 저항성 마커로 유전자 Ty-1과Ty-3 분석을 실시하였고, 아그로주입법으로 생물검정을 실시하였다. 대추형은 티티찰, TY 티니, TY 생생 II, TY 센스큐 등 4종, 방울형은 TY 엔도르핀, TY 스마프사마, 티아라 TY, 올레 TY 등 4종, 완숙형은 TY 킹덤, TY 에이스, TY 홈런, TY 알토랑, 도테랑 TY 위너, 스틱스 TY 등 6종에서 저항성유전자를 확인하였다. 유묘검정은 대추형과 방울형은 모두 유전자 분석결과와 일치하였으나, 완숙형은 저항성 품종에서도 일부 병징이 발현되는 경향이었다. 품종별 수량성은 대추형은 티티찰 대비 TY 티니가 우수하였고, 방울형은 스마일 대비 TY 스마프사마, 티아라 TY이 우수하였으며, 완숙형은 다복 대비 TY 에이스, TY 킹덤 등이 우수한 품종이었다.