• 한국건축시공학회지
• /
• 제3권1호
• /
• pp.139-146
• /
• 2003

The special requirements of high-performance concrete(HPC) could be enhanced property over others such as compressive strength, durability, and construction practices. In order to satisfy these requirements a series of laboratory trial mixes and following mock-up test of reinforced concrete wall at field were performed in this study. The objective of this study was to quantitatively evaluate the workability, compressive strength, and the increased heat of hydration caused by the increase of the specific weight of cement according to various variables. Six example series designed about a minimum compressive strength of 500kgf/$\textrm{cm}^2$ at 28 days, and an approximately slump and slump flow of 25cm and 60cm respectively were tested. The selection process of the specific weight of water and the percentage of fly-ash transposition determined to be most suitable for the production of HPC is presented in the following paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.43-46
• /
• 2008

This study investigated if a requirement for screen gloss is needed in the TCO Requirements and was, therefore, targeted towards finding an acceptable reflex level. The results show that a glossy surface has an impact on the visual ergonomics, and for this reason we believe that a requirement is needed. Although, the results do not point to a single value that is better than another, so a selection for a requirement level has to be augmented with additional information. Such a discussion is given and 60 gloss units at 60 degrees ($GU_{60}$) was selected as the new requirement level for the TCO Requirements (TCO '03 and TCO '05).

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.71-80
• /
• 1998

This study proposed a method to apply certain fuzzy-related Quality control concepts to design customer-oriented products considering user requirements and information starting with the product development stage. This approach showed how to define the importance level of design elements and how to Quantify complex subjective perception of products using the fuzzy linguistic rating method and quality function deployment concepts. Using this approach, various customer requirements could be interpreted and reflected on the early design phase of a new product. To validate the proposed method, an experiment was conducted for designing the shape of the beeper using 14 subjects and 10 commercial beeper products. Front area, width/length ratio, thickness, curve variance, weight, and display area were selected as design elements of the beeper. The results showed that among design elements, front area and weight are significantly related with the subjective perception of the products. Consequently, this study indicates that customer decision on product selection could be made by quantification of user perception for beeper products.

• Architectural research
• /
• 제17권3호
• /
• pp.83-91
• /
• 2015

A comprehensive understanding of functions and performances enables a selection of appropriate alternatives to the existing design and can prevent defective design. A performance-based design quality management can ensure successful project completion. This study proposes a new model for design quality management in order to prevent defective design and to minimize design change. The new quality management model defines the requirement about function and performance based on technical characteristic, and assesses suitability for design alternatives. This study attempts to propose a quality matrix assessment method that can compare the alternative design and requirements defined with the new quality management model. This method can judge conformity and suitability of design quality in accordance with the requirements configured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.620-623
• /
• 2002

To cope with the challenge of competitive market, manufacturing system needs to be agile in terms of its reconfigurability and scalability. For a system to be adapted to changed requirements, decision support tools such as configurator have to be provided. This paper introduces the basic framework of a configurator for assembly system Based on the factory data model(FDM) depicting the overall structure of a manufacturing system, functions of the configurator are described, i.e., requirements analysis, module selection and configuration optimization.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 추계학술대회
• /
• pp.17-23
• /
• 2002

Value can be defined as function divided by cost. The ultimate goal of VE (Value Engineering) is to simultaneously reduce cost and to enhance function in given projects. In general, there are eight phases (Selection, Investigation, Speculation, Evaluation, Development. Presentation, Implementation, and Audit) to perform VE. This paper presents analysis of important factors for VE in construction fields using QFD (Quality Function Deployment) technique. QFD was introduced in 1972 to help design supertanker in Mitsubish's shipyards in Kob, Japan and formally defined by the American Supplier Institute in 1987 as a system for translating consumer requirements into appropriate company requirements at every stage, from research, through product design and development, to manufacture, distribution, installation, and marketing, sales and services. The objective of this paper is to provide and analyze the trend on the viewpoint of efficient value engineering of field workers. The data are collected by questionnaires. The samples for this study are chosen from 13 companies in Korea during 2 months (2002. 7 ∼ 2002. 8). The results of this study will play an important role not only for the efficient value engineering but also for preparing of life cycle cost analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.462-467
• /
• 2004

In order to determine the most suitable material system which can achieve the lightweight design and fulfill the design requirements of carbody structures of Korean Tilting Train eXpress (TTX), aluminum carbody, composite carbody, and hybrid carbody combined with aluminum and composite structures were considered in present study. The finite-element analysis was used to verity the design requirements of the TTX carbody structures with the material system being considered in the design stages. The stresses in the carbody structures and deflections of underframe against static load cases were checked as design criteria. The results show that the hybrid carbody structures are beneficial with regard to weight savings and structural integrity when compared to aluminum and composite carbody structures.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.65-70
• /
• 1998

Economic evaluation methodologies for railway investments of China and Korea are comparatively analyzed. Chinese procedures specified in the new economic evaluation manual of 1997 were compared with those of Korea based on the economic evaluation manual of 1982. As expected those procedures reflect general economic requirements of the respective countries. Several differences in the specification are also noted. Details of the specification of Chinese procedure far exceed Korean specification, while Korean manual is rich of explanation on the fundamental theory. Differences in the procedure of calculating benefits of investments are most conspicuous, and specific requirements of carrying out a optimum opening year analysis in Korean procedure is notable. Despite of these differences in the procedure, two methodologies share same objective of ensuring selection of economically and financially sound railway projects. Both procedures of China and Korea, however, limit their evaluation scope on railways alone. Therefore, they are needed to expand scope of evaluation to encompass the idea of multi-modal or inter-modal evaluation, which will eventually contribute to build truly efficient national comprehensive transportation system.

• 항공우주기술
• /
• 제9권2호
• /
• pp.123-128
• /
• 2010

과학기술위성 3호는 무게 170kg 이하의 과학적 임무를 수행하는 위성이다. 이 위성은 소형위성, 또는 세부적으로 마이크로 위성으로 분류된다. 이러한 소형위성을 위한 발사체는 각 발사체별로 다른 환경적 인터페이스를 가진다. 소형위성들은 일반적으로 다중 발사되기 때문에 적합한 발사체 선정에 제한적이다. 따라서 위성 개발 초기부터, 소형위성은 소형위성 발사체의 환경요건을 고려하여 디자인 되어야한다. 본 논문에서는 소형위성 발사에 적합한 발사체의 환경적 요구사항을 정리하고, 이러한 모든 발사체의 요구조건을 수용할 수 있는 요구조건을 제시 한다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.373-376
• /
• 1996

The design development, and production of a product is one of the greatest challenges which flexible manufacturing systems face today. No matter how a company refines and controls the manufacturing process, if the product is not properly designed, it will not operate correctly or performed well. Therefore the focus on quality of design must be balanced. One such strategy certain to address the managerial and manufacturing of the future is concurrent engineering. Concurrent engineering calls for the consideration and inclusion of product design attributes satisfying all the design constraints such as customer requirements. Furthermore, concurrent engineering has been recently promoted in many industries as a response to competitive marketing pressures. Viewed as a systematic approach of creating high quality products and bringing them to market at lower cost and in significantly less time, it also attracts the attention of quality designers. In this paperm a methodology and model for optimizing the product design, especially selection of optimal design alternative, is developed. The focus of this paper is on product design as the most critical activity of concurrent engineering. The model is based on the customer requirements for quality. Customer requirements for a certain product can be grouped based on the various design attributes. The design attributes have the priorities. The number of design functions. Design attributes value are calculated, however these values are applied to the optimization method. Numerical example will be illustrated.