Architectural research

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Decision Making Method based on Function and Performance Matrix Assessment Considering Design Change

  • Oh, Youngsuk (Department of Architectural Engineering, Dankook University) ;
  • Chun, Jaeyoul (Department of Architectural Engineering, Dankook University) ;
  • Cho, Jaeho (Department of Architectural Engineering, Dankook University)
  • Received : 2014.05.08
  • Accepted : 2015.09.01
  • Published : 2015.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

A comprehensive understanding of functions and performances enables a selection of appropriate alternatives to the existing design and can prevent defective design. A performance-based design quality management can ensure successful project completion. This study proposes a new model for design quality management in order to prevent defective design and to minimize design change. The new quality management model defines the requirement about function and performance based on technical characteristic, and assesses suitability for design alternatives. This study attempts to propose a quality matrix assessment method that can compare the alternative design and requirements defined with the new quality management model. This method can judge conformity and suitability of design quality in accordance with the requirements configured.

Keywords

References

  1. Ahmed, Syed M., Sang, Li. Pui, and Torbica, Zeljko M. (2003) "Use of Quality Function Deployment in Civil Engineering Capital Project Planning", Journal of Construction Engineering and Management, 129 (4), 358-368. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:4(358)
  2. Caltrans VA Report Guide. (1999) "State of California Department of Transportation"
  3. Jeong, J.S., Ryoo, I.W. and Lee, Y.W. (2006) "A Study on the Choice of the Curtain-Wall Type and the Exterior Material according to Commercial Building Images by using the AHP". Korea Institute of Construction Engineering and Management(Planing)" 22 (11), 89
  4. Jun, H.J. and Cho, H.J. (2005) "A Study on the Design Priority Analysis of Design Factors of Apartment Facade using AHP", Korea Institute of Construction Engineering and Management(Planning), 21 (7), 49
  5. Jung, J.H. and Lee, H.K. (2011) "A Study on the Analysis of Contract Changing Situation for Public Construction Project. Regional Association of Architectural Institute of Korea", 13 (04), 315
  6. Kim, S.W., Nam H.W., Lee, J.S., Shin, C.H., and Chun, J.Y. (2009) "Case Survey and Analysis for the Proper Design Changes Management", Architectural Institute of Korea, Academic Annual Conference Proceedings
  7. Kwak, C. (2011) "Study of the Method of Analysis for Main Causes of Design Quality Declining using QFD in Construction Projects", Master's thesis, Sungkyunkwan University
  8. Kwak, C. and Kim, Y.S. (2010) "Building the Model of Analysis for the Main Causes of Design Quality declining in the Construction Projects", Korea Institute of Construction Engineering and Management, Academic Annual Conference Proceedings
  9. Lee, J.S. and Chun, J.Y. (2009) "Risk Response Analysis Model for Construction Method Using the Forced-Decision Method and Binary Weighting Analysis", Journal of Asian Architecture and Building Engineering, 8 (1), 205-212 https://doi.org/10.3130/jaabe.8.205
  10. Lee, J.S. and Chun, J.Y. (2010) "Decision Making Process for Alternative Selection of Proper Design Change in Construction Project", Korea Institute of Construction Engineering and Management, 11 (2), 74 https://doi.org/10.6106/KJCEM.2010.11.2.74
  11. Lee, J.S. and Chun, J.Y. (2012) "A Numerical Value Evaluation Model for the Optimum Design Selection. Journal of Asian Architecture and Building Engineering" 11 (2), 283-290 https://doi.org/10.3130/jaabe.11.283
  12. Oh, B.S. (2007) "Study on the Analysis about Causes of Change based on Case Analysis of Construction Project on the Site" Seoul National University of Science and Technology, Master's thesis
  13. Park, E.K. and Park, T.K. (2005) "A Study on the Establishment of a Model and Criteria for Priority of Road Maintenance Using an Analytic Hierarchy Process" Architectural Institute of Korea, Academic Annual Conference Proceedings
  14. Phillip Crosby (1979) "Quality Is Free: The Art of Making Quality Certain", McGraw-Hill Companies 1st edition
  15. Procurement Agency (2004), "Design Management Business Handbook"
  16. Shabtai Isaac and Ronie Navon (2008) "Feasibility Study of an Automated Tool for Identifying the Implications of Changes in Construction Projects" Journal of Construction Engineering and Management, 134 (2), 139-145 https://doi.org/10.1061/(ASCE)0733-9364(2008)134:2(139)
  17. Yang, J.K. and Kim, S.Y. (2005) "Improvement and Systematization of Pre-Study Work for Design Value Engineering in Construction Projects by Quality Function Deployment" Korea Institute of Construction Engineering and Management, 6 (4), 122
  18. Yoo, S.Y. and Yi, J.S. (2005) "A Basic Study on the Application of QFD at Architectural Design Phase" Korea Institute of Construction Engineering and Management", Academic Annual Conference Proceedings