• Computers and Concrete
• /
• v.21 no.5
• /
• pp.531-538
• /
• 2018

The slag through sieve #4 replaced the natural fine aggregate in different proportions (0-50%) to make ready-mixed soil and slag (RMSAS). The fresh properties studied, and the concrete specimens were produced to test the hardened properties at different ages. Results showed that the workability of RMSAS decreases when the replacement increases. The unit weight increases with the replacement. The setting time extends when the replacement decreases and shortens when the replacement increases. The compressive strength, ultrasonic pulse velocity and hammer rebound value increase with the replacement. However, the high-replacement results decrease because of the expansion factor at late age. Resistivity is close and less than $20k{\Omega}-cm$. After the industrial of steelmaking by-products are processed properly, they can be used in civil engineering, not only as a substitute for natural resources and to reduce costs, but also to provide environmental protection.

• Journal of Korean Society for Quality Management
• /
• v.19 no.2
• /
• pp.117-124
• /
• 1991

In this paper, it is assumed that a system is composed of an essential unit and a nonessential unit. During the running of the system, an essential unit is replaced at periodic replacement time T or at nth failure of essential unit whichever occurs first. Nonessential unit is replaced at its failure and at the replacement of essential unit. This paper derive optimal replacement period which minmises the total expected cost for replacement. The unimodality of totoal maintenance cost function is proved under the assumption that hazard rate of each component is continuous and monotone increasing failure rate(IFR). Based on this condition, it is shown that the optimal replacement period is finite and unique.

• Journal of Chest Surgery
• /
• v.24 no.10
• /
• pp.967-972
• /
• 1991

Between Feb. 1982 and July 1990, 173 patients [male: 89, female: 84] Who underwent heart valve replacement for acquired valvular heart disease on the Department of Thoracic and Cardiovascular Surgery, School of Medicine, Pusan National University, were reviewed for return to work after heart valve replacement. The replaced valve were mitral [128, 74.0%], aortic[10, 5.8%], mitral & aortic[35, 20.2%]. Two tricuspid valve replacement were excluded. Several important factors influencing the return to work were age, the employment status before surgery, the number of replaced valve, the pre - op NYHA functional class and cardiac function [ejection fraction]. These factors were closely related to the optimal time of heart valve replacement. It can be concluded that the rate of return to work and the quality of life would be improved if valve replacement were performed at an earlier stage of valvular heart disease.

• Journal of Chest Surgery
• /
• v.33 no.2
• /
• pp.160-166
• /
• 2000

Background: The purpose of this study is to evaluate and analyze the surgical results in patients undergoing operations for multiple for multiple valvular heart diseases. Material and method: From April 1982 to June 1997 multiple valve replacement was performed in 150 patients mitral and aortic valve replacement were done in 135 patients mitral and tricuspid valve replacements in 10 patients triple replacements in 4 patients and aortic and tricuspid valve replacement in 1 patient. Of the valves implanted 157 were St. Jude 104 Duromedics 20 Carpenter-Edwards 6 Bjork-Shiley 6 Ionescu-Shiley and 2 Medtronics. Result: The hospital mortality rate was 10.7% (16/150) and the late mortality rate was 7.2% (8/134) The mortality rate was high in early operative period but decreased with time. The causes of death were low cardiac output in 9 sudden death in 3 congestive heart failure in 3 bleeding in 2 cerebral thrombosis in 1 leukemia in 1 multiorgan failure in 1 and so on . The actuarial survival rate excluding operative death was 83.1% at 15 years. Conclusion: With a follow-up now extending to 15 years the multiple valve replacement continues to be reliable procedure with relatively low mortality and morbidity.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.376-381
• /
• 2011

In Korea Water Resources Corporation (K-Water) has seen four problems rising in four aspects of property management of approximately 1,300 buildings scattered through put to country. To solve these, ground data for repair and replacement works to be conducted for prevention will be prepared and building maintenance system (hereinafter referred to as PBMS) intended to record related repair and replacement work histories and calculate LCC of the related these items will be developed. PBMS, a web-based system, will be developed for users' convenience and data monitoring in real time. To sum up, PBMS are expected to maximize efficiency in four aspects including the establishment of repair and replacement work plans for prevention, history management, DB for predicting future work to be occurred and enable the determination of priorities by being developing into facility condition assessment systems through the results of analysis of repair and replacement histories and LCC.

• Journal of Korean Society for Quality Management
• /
• v.48 no.1
• /
• pp.201-214
• /
• 2020

Purpose: The purpose of this paper is to determine an optimal number of cycle times for the replacement under the circumstance where the system is replaced at the periodic time and the multiple number of working cycles whichever occurs first and the system is minimally repaired between the replacements if it fails. Methods: The system is replaced at periodic time () or cycle time, whichever occurs first, and is repaired minimally when it fails between successive replacements. To determine the optimal number of cycle times, the expected total cost rate is optimized with respect to the number of cycle times, where the expected total cost rate is defined as the ratio of the expected total cost between replacements to the expected time between replacements. Results: In this paper, we conduct a sensitivity analysis to find the following results. First, when the expected number of failures per unit time increases, the optimal number of cycle times decreases. Second, when the periodic time for replacement becomes longer, the optimal number of cycle times decreases. Third, when the expected value for exponential distribution of the cycle time increases, the optimal number of cycle times increases. Conclusion: A mathematical model is suggested to find the optimal number of cycle times and numerical examples are provided through the sensitivity analysis on the model parameters to see the patterns for changes of the optimal number of cycle times.

• Architectural research
• /
• v.4 no.1
• /
• pp.39-44
• /
• 2002

Recently, the coal-ash production has been increased by increase of consumption of electric power. So it is important to secure a reclaimed land from pollution and develop practical application of coal ash. This is an experimental study to compare and analyze the properties of concrete using high volume of coal ash (including fly ash and bottom ash) as a part of fine aggregate. For this purpose, the mix proportions of concrete according to replacement ratio of coal ash (10, 20, 35, 50%) were selected. And then air content, slump, setting time, bleeding content, chloride content, compressive strength and carbonation test were performed. According to test results, it was found that the bleeding content of concrete using the coal ash decreased according to increase of replacement ratio. And the chloride content of concrete using the bottom ash as a part of fine aggregate increased as the replacement ratio of bottom ash increased, but it is satisfied with the total chloride content of concrete recommended by KCI - $0.3kg/m^3$ below. Also, the compressive strength of concrete using the bottom ash was similar to that of plain concrete(BA 0) after 28days of curing and the carbonation depth of concrete increased as the replacement ratio increased. However, the carbonation depth of concrete using the fly ash decreased as the replacement ratio of fly ash increased.

• Journal of Korean Society for Quality Management
• /
• v.20 no.2
• /
• pp.33-43
• /
• 1992

Items are assumed to fail by degradation. An appropriate stochastic model of such item is a cumulative process in which an item can fail only when the total amount of wear exceeds a prespecified failure level. This paper presents replacement policy in which an item is replaced at a certain level of wear before failure or at failure, whichever occurs first. Yet, when measuring the item wear level is very expensive, destructive or time-consuming, it may be economical to use substitutive characteristics that are correlated with the item wear level and relatively inexpensive to measure. The item's wear level could usually be estimated by monitoring such substitutive characteristics only except for a breakdown, which may be observed immediately at its occurrence. The purpose of this paper is to find an optimal periodic replacement policy based on such substitutive characteristics that balance the cost of replacement with the cost of failure and result in a minimum total long-run average cost per unit time. The optimal level of substitutive characteristics to replace the item is obtained. Numerical example illustrate how the model can be used to determine the optimal replacement policy.

• Journal of the Korean Society of Food Culture
• /
• v.38 no.6
• /
• pp.402-414
• /
• 2023

This study evaluated the consumers' demands and points of improvement for restaurant meal replacement through importance-performance analysis by the restaurant meal replacement segment market using food involvement. The results were as follows. First, after segmenting the restaurant meal replacement market using food involvement, it was classified into three markets (multiple involvements, exploration-oriented, and product quality-oriented). Second, an analysis of the importance of restaurant meal replacement selection attributes revealed taste, sanitation, quality, freshness, price, saving time, texture, ingredients, preparation process, and quantity to be highly important. An analysis of the differences according to the market type revealed the multiple involvement type to be more important than other groups, considering the restaurant meal replacement selection attribute element. Third, an analysis of the importance-performance analysis of restaurant meal replacement selection attributes revealed that quantity and price as the selection attributes that needed to be improved first in all three markets. In addition, in the multiple involvement type, food additives appeared as a selection attribute requiring priority improvement, revealing the characteristics of a market that cares about diet and health.

• Journal of Applied Reliability
• /
• v.15 no.1
• /
• pp.6-11
• /
• 2015

Maintenance plays an important role in keeping product availability, reliability and quality at an appropriate level. In this paper, two-types of maintenance policies are studied following the expiration of two-dimensional (2D) free replacement warranty. Both the fixed-maintenance-period policy and the variable-maintenance-period policy are based on a specified region of the warranty defined in terms of age and usage where all failures are minimally repaired. An accelerating failure time (AFT) model is used to allow for the effect of usage rate on product degradation. The maintenance model that arises following the expiration of 2D warranty is discussed. The expected cost rates per unit time from the user's point of view are formulated and the optimal maintenance policies are determined to minimize the expected cost rate to the user. Finally numerical examples are given to illustrate the optimal maintenance polices.