• Structural Engineering and Mechanics
• /
• v.47 no.6
• /
• pp.773-790
• /
• 2013

Bending behaviors of corroded reinforced concrete (RC) beams under repeated loading were investigated experimentally. A total of twenty test specimens, including four non-corrosion and sixteen corrosion reinforced concrete beams, were prepared and tested. A numerical model for flexural and cracking behaviors of the beam under repeated loading was also developed. Effects of steel corrosion on reinforced concrete beams regarding cracking, mid-span deflection, stiffness and bearing capacity of corroded beams were studied. The impact of corrosion on bond strength as the key factor was investigated to develop the computational model of flexural capacity. It was shown from the experimental results that the bond strength between reinforcement and concrete had increased for specimen of low corrosion levels, while this effect was changed when the corrosion level was higher. It was indicated that the bearing capacity of corrosion beam increased even at a corrosion level of about 5%.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.4
• /
• pp.229-233
• /
• 1995

Acremonium chrysogenum was immobilized in ionotropic gel beads to develop semi-continuous production of cephalosporin C (CPC). Barium alginate beads were more stable than calcium alginate or strontium alginate beads in chemically defined media. The gel stability of Ba-alginate was further increased by cross-linking with polyethyleneimine (PEI). The presence of carboxymethyl cellulose inside Ba-alginate beads did not reduce mass transfer resistance. Ba-alginate microbeads that had little diffusion limitation increased CPC production rate 1.6 fold higher than that of normal beads. CPC fermentation with immobilized cells in Ba-alginate microbeads was performed continuously for 40 days by way of repeated fed-batch operations. Mathematical modeling was developed to describe the repeated fed-batch fermentation system. Results of the computer simulation agreed well with the experimental data, which made it possible to predict an optimal feeding rate that could maximize total CPC productions.

• Toxicological Research
• /
• v.19 no.4
• /
• pp.259-266
• /
• 2003

Although 'Cinnamon' has been widely used for the food and biophamacy in the world, it's toxicity was not screened completely. Major component of 'cinnamon' is CB-OH and CB-PH. CB-PH has been reported to have antimutagenic effect. To investigate the toxicity of 2-o-Benzoylcinnama-Idehyde (CB-PH), repeated dose (4 weeks) oral toxicity test performed in SD rats. Results of repeated dose oral toxicity tests for 4 weeks (CB-PH; 500, 1000, 2000 mg/kg/day) suggested that the CB-PH treated group showed no significant toxicological findings with body weights, organ weights, hematological and histopathological findings. Therefore, these data indicated that the maximum tolerated dose of CB-PH was 2000 mg above/kg/day in the rats.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.143-152
• /
• 1996

The vibratory bowl feeder is the most versatile of all hopper feeding devices for small engineering parts, and the typical nonlinear dynamic system experiencing repeated impacts with friction. We model and analyze the dynamic behavior of a single part on the vibrating track of the bowl feeder. While the previous studies are restricted to the sliding regime, we focus our analysis on the hopping regime where the high conveying rate is available. We present the numerical analysis results for conveying rate and frictional impact process both in periodic and chaotic regimes. We examined the dynamic effects from the variation of several physical parameters, and presented the important features for the design of the vibratory bowl feeder. This research holds much potential for leverage over design problems of wide range of mechanisms and tools with repeated collisions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.3
• /
• pp.63-72
• /
• 1991

To investigate the status of repeated use of irrigation water observations of irrigation water were made on dry days during the irrigation periods in 1986 and 1987 crop year. The total area of studied site is 1,441 ha. The site is a major portion of Jedaecheon basin which is located in Bubuk-myeon, Miryang-gun, Gyeongnam Province. The studied area was subdivided into six small blocks. The inflow and outflow of daily irrigation water for these subdivided blocks were checked. Obtained results are as follows : 1. The over all possible ratio of the repeated use of irrigation water in studied area was 48.3%, which means that approximately one half of the surface flow was possible to be repeatedly used as irrigation water in this area. 2. The ratio of repeated use of irrigation water in sloppy paddy area was 4.29%, whereas, the ratio was 21.97% in the plain area. The average figure of this ratio over studied area was estimated as 17.43%.

• Korean Journal of Clinical Laboratory Science
• /
• v.45 no.2
• /
• pp.60-65
• /
• 2013

Data from repeated measurements are accomplished through repeatedly processing the same subject under different conditions and different points of view. The power of testing enhances the choice of pertinent analysis methods that agrees with the characteristics of data concerned and the situation involved. Along with the clinical example, this paper compares the analysis of the variance on ex-post tests, gain score analysis, analysis by mixed design and analysis of covariance employable for repeating measure. Comparing the analysis of variance on ex post test, and gain score analysis on correlations, leads to the fact that the latter enhances the power of the test and diminishes the variance of error terms. The concluded probability, identified that the gain score analysis and the mixed design on interaction between "between subjects factor" and "within subjects factor", are identical. The analysis of covariance, demonstrated better power of the test and smaller error terms than the gain score analysis. Research on four analysis method found that the analysis of covariance is the most appropriate in clinical data than two repeated test with high correlation and ex ante affects ex post.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2015

In this paper, the repeated learning technique of neural network was used for gripping force control algorithm. The hybrid control system was introduced and the manipulator's finger reorganized form 2 ea to 3 ea for comfortable gripping. The data was obtained using the gripping force of repeated learning techniques. In the fucture, the adjustable gripping force will be obtained and improved the accuracy using the artificial intelligence techniques.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.281-287
• /
• 2012

The customer load profile clustering method is used to make the TDLP (Typical Daily Load Profile) to estimate the quarter hourly load profile of non-AMR (Automatic Meter Reading) customers. This study examines how the repeated clustering method improves the ability to discriminate among the TDLPs of each cluster. The k-means algorithm is a well-known clustering technology in data mining. Repeated clustering groups the cluster into sub-clusters with the k-means algorithm and chooses the sub-cluster that has the maximum average error and repeats clustering until the final cluster count is satisfied.

• Structural Monitoring and Maintenance
• /
• v.6 no.4
• /
• pp.269-289
• /
• 2019

This study investigated experimentally the response of thick reinforced concrete specimens having hollow cores with critical parameters. The investigation includes testing of twelve specimens that are solid and hollow-core slab models. Each specimen consists of two pieces, the piece dimensions are (1.2 m) length, (0.3 m) width and (20 cm) thickness tested under both monotonic and repeated loading. The test program is carried out to study the effects of load type, core diameters, core shape, number of cores, and steel fiber existence. Load versus deflection at mid span, failure modes, and crack patterns were obtained during the test. The test results showed that core shape and core number has remarkable influenced on cracking pattern, ultimate load, and failure mode. Also, when considering repeated loading protocol, the ultimate load capacity, load at yielding, and ductility is reduced.

• Structural Engineering and Mechanics
• /
• v.42 no.4
• /
• pp.449-469
• /
• 2012

For generally damped linear systems with repeated eigenvalues and defective eigenvectors, this study provides a decomposition method based on residue matrix, which is suitable for engineering applications. Based on this method, a hybrid approach is presented, incorporating the merits of the modal superposition method and the residue matrix decomposition method, which does not need to consider the defective characteristics of the eigenvectors corresponding to repeated eigenvalues. The method derived in this study has clear physical concepts and is easily to be understood and mastered by engineering designers. Furthermore, this study analyzes the applicability of step-by-step methods, including the Newmark beta and Runge-Kutta methods for dynamic response calculation of defective systems. Finally, the implementation procedure of the proposed hybrid approach is illustrated by analyzing numerical examples, and the correctness and the effectiveness of the formula are judged by comparing the results obtained from the different methods.