• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.1-5
• /
• 2010

Nowaday in the ubiquitous environment, the real-time remote control and monitoring technology for power grids or a similar system provides service as a sharable and independent of time-location for various contents to get from sensors or cameras of the system. In this paper, we introduce the real-time monitor and control system for photovoltaic system to evaluate the system performance and to keep the maintenance by using IMS (Internet Management System). To prove the pragmatic use of IMS, we applied the IMS in water management system. We designed feasibly to control on remote site by web-browser. It guarantees a continuity of real-time information transferring by IMS.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.4
• /
• pp.348-358
• /
• 2003

According to Electricity Acceleration Law of Rural Area recently, the needs for replacement of a small scale diesel power generation facility which supplied electricity to 10-50 households Remote Islands has been revealed due to high operating and maintenance cost of Diesel Power Generation. Optimization of electric power system for Small Remote Islands must be made considering the economics, reliability and stability as power sources and estimation of total construction cost of those power stations. For its purpose, an assessment of power generation options such as Photovoltaic, Fuel cell, Wind-hybrid was implemented, economic evaluation of power supply shows the Photovoltaic, Fuel Cell for few household's islands and Diesel, Wind-hybrid for more inhabited islands. Power supplied by Diesel shows the best response to increasing electric demand and system reliability even with its lower economic value. Those who are in charge of power planning have to pay attention to system reliability, stability and operating characteristics of candidate's power supply besides its economics.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.429-447
• /
• 2020

The considered simulation tasks are based on an electrometallurgical process development strategy and associated telemanipulator simulation systems are proposed with various scales of experimental facilities. Fundamentally, target facilities are assumed to be operated only by remote handling systems because the considered process is operated in hazardous environments. Futhermore, the feasibility at various scales should be experimentally verified with gradual increase in throughput. In this regard, bench, engineering, and pilot-scale simulation systems are important early-stage tools for assessing the practical operability of the target process with the material handling systems. Such simulation systems are highly customized for applications and are a precursor to larger pilot and demonstration-scale plants. This paper introduced and classified the developed simulator systems for this approach at various scales using remote handling systems which were assembled inside a virtual target facility, and the manmachine interface was included for a more realistic operation of the simulator. The results obtained for each simulator show the feasibility and requirement for improvement of the systems for the considered test issues with respect to the operation and maintenance of the process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.107-112
• /
• 2010

When we design the control system used Programmable Logic controller(PLC), if we program a Sequential Function Chart(SFC), It is easy to understand the sequential flow of control, to maintenance the controller and to describe a program. SFC language is programmed by a single sequence, a select sequence and a parallel sequence. In a select sequence, when the select step is error, the whole process is stopped. If the error step has no connection the whole process, the loss is down when we debugging the program without stopping the whole process. Therefore, this thesis shows the efficient method of remote control for select sequence and we confirmed its feasibility through actual example.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.571-576
• /
• 1996

Currently most nuclear power plants(NPPs) are adopted the mid-loop operation to minimize the overhaul period and save the operating cost. For mid-loop operation it is essential to install nozzle dam between RCS pipe and steam generator(SG). Because SG remains more highly contaminated with radioactive material than any other parts of the NPPs, the repairmen are very reluctant to carry out installing nozzle dam inside the SG. Until now, unfortunately, it appears that no practically applicable device was developed to provide the longstanding demand. Also the accidents have been reported by licenser event report during this operation mode due to loss of residual heat removal(RHR). The purpose of this paper is to conduct remotely blocking and disintegration of nozzle of a SG which has the highest radiation exposure during the maintenance in NPPs. The remote nozzle blocking device of a SG includes three bladders, hubs, air controller provisions to supply and contact air pressure into the bladders. This remote nozzle block device will give the larger operation margin to prevent the loss of RHR and minimize the radiation exposure dose to the repairman and shorten the overhaul periods.

• Journal of the Korea Convergence Society
• /
• v.13 no.2
• /
• pp.303-312
• /
• 2022

In this study, the importance-performance analysis (IPA) of the content components of remote graduate students was conducted. To this end, an online survey of 221 remote graduate students at J University obtained the following results. First, the importance of content components by area was in the order of learning content, interaction, teaching-learning strategy, and evaluation, and the degree of execution was in the order of teaching-learning strategy, interaction, evaluation, and learning content. Second, it was found that there were significant differences between importance and performance in the four areas of content components: learning content, teaching-learning strategy, interaction, and evaluation. The importance-execution analysis (IPA) was conducted in two dimensions: region-specific and item-specific, and the results are as follows. The learning content was found to be the maintenance area, the teaching-learning strategy and interaction were the key improvement areas, and the evaluation area was the overinvestment area. The results of this study can be used as basic data to diagnose the present of remote graduate school content and to gauge what needs to be improved in the future based on it.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.9-18
• /
• 1997

It is proposed a new approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants, workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from to radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of proposed digital vision system is illustrated by simulation and experiment for similar steam generator model.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.188-191
• /
• 2002

This paper concerns 3-D graphical modeling and simulation techniques for design and control of automated equipment for construction and facility maintenance. A case study on the use of 3-D graphics techniques for developing a power plant maintenance robot is presented. By simulating equipment operation within the 3-D geometry models of the work environment the environment design was improved. The 3-D graphical models of the equipment and the work environment were further utilized for the control of the robot from a remote distance. By presenting the real-time updated equipment configuration and the work environment to the operator, the graphical model-based equipment control system helped the operator overcome the problems associated with spatial perception. The collision between the robot and the plant structures was also avoided based the real-time analysis of the dynamically updated graphical models.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1245-1247
• /
• 2001

This paper discusses that the maintenance of the propulsion equipment in railway rolling stock. Condition monitoring of railway equipment is the need for integration of remote condition monitoring with maintenance management strategies. The paper outlines research leading to the design and development of a prototype control and monitoring system for propulsion equipment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1519-1522
• /
• 1996

In this paper, we have developed a tele-robotic system for nozzle dam installation/removal works and tube relating maintenance works inside unclear power plant steam generator. Developed tele-robotic system consists of many hardwares including robot and a control system. Based on the 3 dimensional graphic simulation, a 6 D.O.F. hydraulic actuated robot and a 2 D.O.F. robot install/removal device have been developed. And also we deviced special tools for nozzle dam carry and bolting. For the tele-robot and other devices to be controlled at the nonradioactive area outside reactor containment building, we developed a tele-robot control system consisting of supervisory controller and remote controller.