• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.405-414
• /
• 2008

To better understand the physical processes that control the high-latitude lower thermospheric dynamics, we analyze the divergence and vorticity of the high-latitude neutral wind field in the lower thermosphere during the southern summertime for different IMF conditions. For this study the National Center for Atmospheric Research Thermosphere-Ionosphere Electrodynamics General Circulation Model (NCAR-TIEG CM) is used. The analysis of the large-scale vorticity and divergence provides basic understanding flow configurations to help elucidate the momentum sources that ulti-mately determine the total wind field in the lower polar thermosphere and provides insight into the relative strengths of the different sources of momentum responsible for driving winds. The mean neutral wind pattern in the high-latitude lower thermosphere is dominated by rotational flow, imparted primarily through the ion drag force, rather than by divergent flow, imparted primarily through Joule and solar heating. The difference vorticity, obtained by subtracting values with zero IMF from those with non-zero IMF, in the high-latitude lower thermosphere is much larger than the difference divergence for all IMF conditions, indicating that a larger response of the thermospheric wind system to enhancement in the momentum input generating the rotational motion with elevated IMF than the corresponding energy input generating the divergent motion. the difference vorticity in the high-latitude lower thermosphere depends on the direction of the IMF. The difference vorticity for negative and positive $B_y$ shows positive and negative, respectively, at higher magnetic latitudes than $-70^{\circ}$. For negative $B_z$, the difference vorticities have positive in the dusk sector and negative in the dawn sector. The difference vorticities for positive $B_z$ have opposite sign. Negative IMF $B_z$ has a stronger effect on the vorticity than does positive $B_z$.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.87-102
• /
• 1997

The absolute absorbed dose can be determined according to the measurement conditions; measurement material, detector, energy and calibration protocols. The purpose of this study is to compare the absolute absorbed dose due to the differences of measurement condition and calibration protocols for photon beams. Dosimetric measurements were performed with a farmer type PTW and NEL ionization chambers in water, solid water, and polystyrene phantoms using 6MV photon beams from Siemens linear accelerator. Measurements were made along the central axis of 10cm $\times$ 10cm field size for constant target to surface distance of 100cm for water, solid water and polystyrene phantom. Theoretical absorbed dose intercomparisons between TG21 and IAEA protocol were performed for various measurement combinations of phantom, ion chamber, and electrometer. There were no significant differences of absorbed dose value between TG21 and IAEA protocol. The differences between two protocols are within 1％ while the average value of IAEA protocol was 0.5％ smaller than TG21 protocol. For the purpose of comparison, all the relative absorbed dose were nomalized to NEL ion chamber with Keithley electrometer and water phantom, The average differences are within 1％, but individual discrepancies are in the range of - 2.5％ to 1.2％ depending upon the choice of measurement combination. The largest discrepancy of - 2.5％ was observed when NEL ion chamber with Keithley electrometer is used in solid water phantom. The main cause for this discrepancy is due to the use of same parameters of stopping power, absorption coeficient, etc. as used in water phantom. It should be mentioned that the solid water phantom is not recommended for absolute dose calibration as the alternative of water, since absorbed dose show some dependency on phantom material other than water. In conclusion, the trend of variation was not much dependent on calibration protocol. However, it shows that absorbed dose could be affected by phantom material other than water.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.1-8
• /
• 2020

EuiJae Hu BaekRyun is a symbol of Honam Namjonghwa and is respected as a teacher of Honam culture. He is from JinDo and is a relative of Sochi Heo Ryun and a disciple of Misan Heo Hyeong. The spirit of traditional Namjongghwa and the dignity of painting faithful to its technique have been obtained by themselves, and have made it his own. EuiJae organized a 'Yeonjinhoe' in Gwangju to raise his students. After liberation, a house was built under Mudeungsan Mountain. And showed another aspect as a social educator who emphasized and practiced national spirit while being a tea ceremony man. He excelled in Chinese poetry and painting theory, and expressed a unique field in calligraphy. especially worked as an artist good at poetry, caligraphy, and painting. EuiJae showed exceptional talent, especially in landscape painting. His tendency to paint was to follow Ye Chan's technique of drawing with a dry brush, placing importance on the energy of learning, and constantly trying new experiments with the technique of gisaeng. The world of EuiJae's works can be divided into three periods, based on the signature using the trend of painting or the change of perspective pursued, the era of EuiJae, the era of EuiJaeSanin, and the era of EuiDoin, which had a tendency of independent painting. EuiJae's contribution surpassed the artistic historical assessment that he had formed a big stem for the authentic Namjongghwa of Korean painting culture, which was part of Oriental painting. And recognizing that he was a fundamental teacher connecting modern times through the actual scenery based on NamDohwa's universal spirit and regional characteristics and the creative succession of emotions, he should inherit his passion for artistic spirit and tradition and experimental spirit.

• 한국해양학회지
• /
• v.30 no.3
• /
• pp.184-196
• /
• 1995

The line-SW is located in the mouth of Gomso Bay (20 Km long and 5-8 Km wide),west coast of Korea. This area is composed of sand flat, mud flat, sand shoal and chenier, The difference of physical, geological and geomorphic conditions in subenvironments of the bay may control and produce distingtive foraminiferal populations and assemblages. This study investigates whether five a priori subenvironments (five local zonations) in Gomso-Bay tidal flat can be distinguished from each other on the basis of total (living plus dead) foraminiferal assemblages. Seventy-four species (67 benthic; 7 planktonic) were recorded in total assemblages of surface sediments from 10 stations. Ammonia beccarii tepida, Discorbis candeiana, Elphidium etigoense and Eponides nipponicus were most dominant species in living and total assemblages. The relative abundance (%) of living population was high at upper flat and decreased from upper to lower flat. The low percentages of living populations in middle to lower flat are probably influenced by the decreasing reproduction of foraminifera caused by high energy condition and addition of dead species from offshore. The occurence of planktonic foraminifera in middle to lower flat (5.3∼6.6%) indicates introduction of planktonic foraminifera from offshore by storm and/or tidal current. The relatively high numbers of species in lower middle to lower flat are probably caused by a mixing of faunas from these areas and offshore. The high numbers of total individuals per 50 ml of sediment in upper flat indicate that this area is a relatively stable environment where waves and currents are protected by the chenier. Five biofacies of the total foraminiferal assemblages were established on the basis of dominant species (those representing more than 20% of the total assemblages in any station) in the five a priori subenvironments recognized along the Line-SW transect in Gomso-Bay tidal flat. Five biofacies are potentially useful in paleoenvironmental interpretation in late Quaternary Gomso-Bay tidal deposits.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.851-860
• /
• 2015

The objective of this study was to manufacture the wood based roughage using lumber from thinning of oak and pitch pine (Pinus rigida). And the study also aimed to investigate a feed value evaluation of wood based roughages. To investigate the optimization condition of steam-digestion treatment for roughage, the wood chips of oak and pitch pine were steam-digestion treated at $160^{\circ}C$ under pressure 6 atm depending on treatment times (60 min, 90 min and 120 min) followed by the content of essential oils analyzed. The essential oil content of steam-digestion treated roughages for 90 min and 120 min were under 0.1 mL/kg. The evaluation of feed value was carried out from steam-digestion treated roughages for 90 min through feed chemical composition analysis, NRC (National research Council) modeling, ruminal degradability analysis and relative economic value analysis. The feed chemical compositions including DM (dry mater), CP (crude protein), EE (ether extract), NDF (neutral detergent fiber), ADF (acid detergent fiber), ADL (acid detergent lignin), NFC (nonfiber carbohydrate) in oak roughage were 95.4, 1.36, 3.11, 90.05, 83.85, 17.33, 6.50%, respectively, and in pitch pine roughage were 94.37, 1.33, 5.48, 87.89, 86.88, 30.56, 6.32%, respectively. Both roughages showed low level of protein and very high level of NDF. The TDN (total digestible nutrient) levels using NRC (2001) model in oak and pitch pine roughages were 40.55, 31.22%, respectively. The ruminal in situ dry matter degradability was higher in oak roughage (23.84%) than in pitch pine roughage (10.02%). The economic values of oak and pitch pine rough-ages were 235, and 210 \, respectively.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.182-187
• /
• 2013

In closed plant production system like plant factory, changes in environmental factors should be identified for conducting efficient environmental control as well as predicting energy consumption. Since high relative humidity (RH) is essential for crop production in the plant factory, transpiration is closely related with RH and should be quantified. In this study, four varieties of lettuces (Lactuca sativa L.) were grown in a plant factory, and the leaf areas and transpiration rates of the plants according to DAT (day after transplanting) were measured. The coefficients of the simplified Penman-Monteith equation were calibrated in order to calculate the transpiration rate in the plant factory and the total amount of transpiration during cultivation period was predicted by simulation. The following model was used: $E_d=a*(1-e^{-k*LAI})*RAD_{in}+b*LAI*VPD_d$ (at daytime) and $E_n=b*LAI*VPD_n$ (at nighttime) for estimating transpiration of the lettuce in the plant factory. Leaf area and transpiration rate increased with DAT as exponential growth. Proportional relationship was obtained between leaf area and transpiration rate. Total amounts of transpiration of lettuces grown in plant factory could be obtained by the models with high $r^2$ values. The results indicated the simplified Penman-Monteith equation could be used to predict water requirements as well as heating and cooling loads required in plant factory system.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.75-85
• /
• 2012

This study was investigated to develop an alternative medium for the cultivation of oyster mushrooms. The cultivation characteristics for major cultivated varieties of oyster mushrooms were campared with the food waste medium. In addition, water control & a gap formation of food waste is being pointed out as a problem of the medium material. Therefore, certain amounts of earthworm casting were supplied to the food waste medium to overcome the water and compaction phenomenon. This study investigated the use of the total 6 cultivars of oyster mushrooms, the Suhan(PL.1), Chiak No. 5(PL.2), Chiak No. 7(PL.3), Samgu No. 5(PL.4), Samgu No. 8(PL.5), Jangan No. 5(PL.6). In terms of medium, the optimum growth of the mycelium of the oyster mushroom was observed in the beet pulp medium but in food waste, the mycelium's growth was observed as insufficient in the bulk of cultivars. The Jangan No. 5(PL.6) was superior to other cultivars relative to the mycelium's growth. The optimum concentration of earthworm casting added the foodwaste medium was 30%. When Jangan No. 5(PL.6) was incubated in the foodwaste meidum containing 30% earthworm casting, the early days to germination were long, almost double the amount of time than that of the beet pulp medium. However, it was found that the fruit body size was larger than that of the beet pulp by up to 20.5%, and the length of the fruit body was up to 6.2% longer than that of the beet plup. The total yields increased by 60.5%. The analysis results of the oyster mushroom's nutritional contents cultured using the food waste medium, shows that the protein, vitamin A and vitamin E increased 70.6%, 2.4%, 0.8% respectively, the fat decreased by 12.6% and the oleic acid increased in a very small amount compared to that of the beet pulp medium.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.89-91
• /
• 2001

Two experiments were conducted to compare the dietary supplemental influence of conjugated linoleic acid(CLA), soybean oil(SBO) and commercial tallow(U) on performance and physiological related factor of broiler chicks. Diets contained CP 21.5, 19% and ME 3,100, 3,100kcal/kg for starting and finishing period. Each three levels(1.0, 2.0, 3.0%) of CLA, SBO, CT were supplemented to basal diets. Five hundred forty and three hundred sixty chicks were applied to 3${\times}$3, 2${\times}$3 factorial design with four replicates in Expt 1 and 2. Weight gain, food intake and feed conversion were weekly examined. Blood cholesterol, ND antibody titer, blood components and were measured at the end of experiment. Metabolizable energy(ME) were measured through the metabolic feeding trial in each oil. ME was 8,542, 9,179, 8,133 kcal/kg in CLA, SBO and CT, respectively. In Expt 1, weight gain of chicks fed 1% dietary oil was significantly lower than other treatments(P<0.05). Feed conversion was significantly improved in SBO supplemental groups of all treatments(P<0.05). In Expt 2, CLA supplements increased weight gain significantly for finishing period(P<0.05) compared to that of other treatments. Feed conversion of chicks fed 2% dietary oil was significantly improved relative that of 3%(P<0.05). HDL of 3% dietary supplemental oil treatments was significantly higher for finishing and starting period in Expt 1 and 2, respectively than other treatments(P<0.05). There were no significantly different M Antibody titer in Expt 1, but showed significance between dietary supplemental oil in Expt 2(P<0.05). CLA content of breast meat was 12.23, 18.74, 25.67 mg/g in 1, 2, and 3% CLA treatments and significantly different between them(P<0.05). As the results of these experiments, feeding CLA tended to improve the weight gain compared In that of other dietary oil, but was not increase the ND antibody titer of broiler chciks. CLA content of breast meat also showed the significance at different level of dietary supplement.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.2
• /
• pp.59-70
• /
• 1998

Two-dimensional trend-vector model of sediment transport is first tested in the tidal flat of Garolim Bay, mid-western coast of the Korean Peninsula. Three major parameters of surface sediment, i.e., mean grain size, sorting and skewness, are used for defining the best-fitting transport trend-vector on the sand ridge and muddy sand flat. These trend vectors are compared with the real transport directions determined from morphology, field observation and bedforms. The 15 possible cases of trend vectors are calculated from total sediments. In order to find the role of coarse sediments, trend vectors from sediments coarser than < 4.5 ${\phi}$, (sand size) are separately calculated from those of total sediments. As compared with the real directions, the best-fitting transport-vector model is the "case M" of coarse sediments which is the combined trend vectors of two cases: (1) finer, better sorted and more negatively skewed and (2) coarser, better sorted and more positively skewed. This indicates sand-size grains are formed by simpler hydrodynamic processes than total sediments. Transported sediment grains are better sorted than the source sediment grains. This indicates that consistent hydrodynamic energy can make sediment grains better sorted, regardless of complicated mechanisms of sediment transport. Consequently, both transported vector model and real transported direction show that the source of sediments are located outside of bay (offshore Yellow Sea) and in the baymouth. These source sediments are transported through the East Main Tidal Channel adjacent the baymouth. Some are transported from the subtidal zone to the upper tidal flat, but others are transported farther to the south, reaching the south tidal channel in the study area. Also, coarse sediment grains on the sand ridge are originally from the baymouth, and transported through the subtidal zone to the south tidal channel. These coarse sediments are moved to the northeast, but could not pass the small north tidal channel. It is interpreted that the great amount of coarse sediments is returned back to the outside of the bay (Yellow Sea) again through the baymouth during the ebb tide. The distribution of muddy sand in the northeastern part of study area may result from the mixing of two sediment transport mechanisms, i.e., suspension and bedload processes. The landward movement of sand ridge and the formation of the north tidal channel are formed either by the supply of coarse sediments originating from the baymouth and outside of the bay (subaqueous sand ridges including Jang-An-Tae) or by the recent relative sea-level rise.

• Journal of Life Science
• /
• v.19 no.6
• /
• pp.770-780
• /
• 2009

A new photosensitizer, 9-Hydroxypheophorbide-a (9-HpbD-a), was derived from Spirulina platensis. We conducted a series of experiments, in vitro and in vivo, to evaluate the anticancer effect and mechanism of photodynamic therapy using 9-HpbD-a and 660 nm diode lasers on a squamous carcinoma cell line. We studied the cytotoxic effects of pheophytin-a, 9-HpbD-a, 9-HpbD-a red and 660 nm diode lasers in a human head and neck cancer cell line (SNU-1041). Cell growth inhibition was determined by using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) reduction assay. The effects of 9-HpbD was higher than those of 9-HpbD-a red or pheophytin-a in PDT. We then tested the cytotoxic effects of 9-hydroxypheophorbide-a (9-HpbD-a) in vitro. The cultured SNU-I041 cells were treated with serial concentrations of 9-HpbD-a followed by various energy doses (0, 0.1, 0.5, 3.2 J/$cm^{2}$) and by various interval times (0, 3, 6, 9, 12 hr) until laser irradiation, then MTT assay was applied to measure the relative inhibitory effects of photodynamic therapy (PDT). Optimal laser irradiation time was 30 minutes and the cytotoxic effects according to incubation time after 9-HpbD-a treatment increased until 6 hours, after which it then showed no increase. To observe the cell death mechanism after PDT, SUN-I041 cells were stained by Hoechst 33342 and propidium iodide after PDT, and observed under transmission electron microscopy (TEM). The principal mechanism of PDT at a low dose of 9-HpbD-a was apoptosis, and at a high dose of 9-HpbD-a it was necrosis. PDT effects were also observed in a xenografted nude mouse model. Group I (no 9-HpbD-a, no laser irradiation) and Group II (9-HpbD-a injection only) showed no response (4/4, 100%), and Group III (laser irradiation only) showed recurrence (1/4,25%) or no response (3/4, 75 %). Group IV (9-HpbD-a + laser irradiation) showed complete response (10/16, 62.5%), recurrence (4/16, 25%) or no response (2/16, 12.5%). Group IV showed a significant remission rate compared to other groups (p<0.05). These results suggest that 9-HpbD-a is a promising photosensitizer for the future and that further studies on biodistribution, toxicity and mechanism of action would be needed to use 9-HpbD-a as a photosensitizer in the clinical setting.