• 대기
• /
• 제26권1호
• /
• pp.111-126
• /
• 2016

In the numerical weather model, surface properties can be defined by various parameters such as terrain height, landuse, surface albedo, soil moisture, surface emissivity, roughness length and so on. And these parameters need to be improved in the Seoul metropolitan area that established high-rise and complex buildings by urbanization at a recent time. The surface roughness length map is developed from digital elevation model (DEM) and it is implemented to the high-resolution numerical weather (WISE-WRF) model. Simulated results from WISE-WRF model are analyzed the relationship between meteorological variables to changes in the surface roughness length. Friction speed and wind speed are improved with various surface roughness in urban, these variables affected to temperature and relative humidity and hence the surface roughness length will affect to the precipitation and Planetary Boundary Layer (PBL) height. When surface variables by the WISE-WRF model are validated with Automatic Weather System (AWS) observations, NEW experiment is able to simulate more accurate than ORG experiment in temperature and wind speed. Especially, wind speed is overestimated over $2.5m\;s^{-1}$ on some AWS stations in Seoul and surrounding area but it improved with positive correlation and Root Mean Square Error (RMSE) below $2.5m\;s^{-1}$ in whole area. There are close relationship between surface roughness length and wind speed, and the change of surface variables lead to the change of location and duration of precipitation. As a result, the accuracy of WISE-WRF model is improved with the new surface roughness length retrieved from DEM, and its surface roughness length is important role in the high-resolution WISE-WRF model. By the way, the result in this study need various validation from retrieved the surface roughness length to numerical weather model simulations with observation data.

• 한국지반환경공학회 논문집
• /
• 제23권6호
• /
• pp.5-17
• /
• 2022

저수지 제방의 침투제어를 목적으로 설치하는 감압정의 성능은 감압정의 직경, 간격, 관통율, 지반의 투수계수, 기초지반 지층의 두께 등 다양한 변수에 의해 영향을 받는다. 따라서 침투수압 경감을 목적으로 감압정을 채택하는 경우 이러한 매개변수를 충분히 검토하여 감압정의 설치제원을 결정해야 한다. 본 연구에서는 저수지 제방의 침투제어를 위한 대책공법으로 제방의 하류부에 감압정과 제방의 상·하류부에 토목섬유 블랭킷(이하 블랭킷)을 병행하여 설치하는 경우 블랭킷의 길이가 감압정의 성능에 미치는 영향을 평가하였다. 상·하류 블랭킷 길이-유량 관계에서 상류 블랭킷의 길이가 증가할수록 감압정에서 배출되는 유량은 감소하며, 하류 블랭킷의 길이가 증가할수록 감압정의 배출 유량은 증가하는 것으로 나타났다. 상·하류 블랭킷 길이-간격 관계에서 상류 블랭킷의 길이가 증가할수록 감압정의 간격은 증가하며, 하류 블랭킷의 길이가 증가할수록 감압정의 간격은 감소하는 것으로 나타났다. 따라서 블랭킷과 감압정을 병행하여 설치함으로써 댐제방의 침투안정성을 확보하고자 하는 경우 침투유량의 배출을 최소화하고 감압정의 간격 확대를 통한 경제성 확보를 위해서는 상류의 블랭킷 길이 증가가 하류의 블랭킷 길이 증가보다 더 효율적인 것으로 나타났다.

• International Journal of Advanced Culture Technology
• /
• 제4권1호
• /
• pp.31-36
• /
• 2016

Morphology evolution of the active layer in bulk hetero-junction organic photovoltaic is modeled and visualized. The width of the phase domain can be predicted using the relationship of characteristics length and evolution time of the process. The 3D numerical simulation of the PCBM/P3HT blend morphology evolution with respect to time is presented. It is observed that the domain width of composition phase can be predicted by using the relationship between value of characteristic length R(t) and evolution time t.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제14권3호
• /
• pp.151-161
• /
• 2010

A reversed trapezoidal fin is analyzed using a two-dimensional analytical method. Heat loss from the reversed trapezoidal fin is presented as a function of the fin shape factor, fin base thickness and the fin base height. The relationship between the fin tip length and the convection characteristic number as well as that between the fin tip length and the fin base height for equal amounts of heat loss are analyzed. Also the relationship between the fin base thickness and the fin shape factor for equal amount of heat loss is presented. One of the results shows that the heat loss decreases linearly with the increase of the fin shape factor.

• 산업기술연구
• /
• 제22권B호
• /
• pp.21-26
• /
• 2002

The non-dimensional heat loss from a thermally asymmetric triangular fin is investigated as a function of a ratio of upper and lower surface Biot numbers (Bi2/Bi1), the non-dimensional fin length and tip surface Biot number using the two-dimensional separation of variables method. The effect of fin tip surface Biot number on the variation of the non-dimensional temperature along the sloped upper and lower surfaces for the thermally asymmetric condition is presented. The relationship between the non-dimensional fin length and the fin tip surface Biot number for equal amount of heat loss is also discussed as well as the relationship between upper surface Biot number and tip surface Biot number for equal amount of heat loss.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.27-32
• /
• 1997

This study was carried out to find the relationship between anatomical characters and compression strength parallel to grain of Pinus densiflora S. et. Z., the representative conifer species in Korea. The results were as follows ; 1. The compression strength parallel to grain increased with the increase of tracheid length and wall thickness. The strength, however, decreased with the increase of height of uniseriate ray and microfibril angle. 2. The major factors affecting compression strength parallel to grain in heartwood were radial diameter of latewood tracheid and wall thickness of earlywood tracheid but length and tangential diameter of latewood tracheid were the important factors in sapwood.

• 말소리와 음성과학
• /
• 제2권1호
• /
• pp.127-133
• /
• 2010

The purpose of the present study was to examine the relationship between sentence repetition and sentence production in school-age children. The participants included 120 school-age children through 1st to 6th grades who were then divided into three grade groups (lower grade: 1st to 2nd grades, intermediate grade: 3th to 4th grades, and higher grade: 5th to 6th grades). The repetition task consisted of 32 sentences that were classified by sentence length (5, 6, 7, and 8 words) and structure (conjunctive and embedded sentences). The sentence production task utilized Lee's (2007) grammaticality judgement and sentence combining task. The findings of present study were as follows. (1) The higher grade performed significantly better than the lower and intermediate grades. (2) The participants performed significantly worse when imitating longer sentences than when imitating shorter ones. In addition, there were interaction effects between grade groups and sentences length. (3) The participants performed significantly better when imitating conjunctive rather than embedded sentences. (4) There was significantly positive correlation between the sentence repetition and sentence production task.

• Management Science and Financial Engineering
• /
• 제9권2호
• /
• pp.1-12
• /
• 2003

For a stationary queue with BMAP arrivals, Takine and Takahashi [8] present a relationship between the queue length distributions at a random epoch and at a departure epoch by using the rate conservation law of Miyazawa [6]. In this note, we derive the same relationship by using the elementary balance equation, ‘rate-in = rate-out’. Along the same lines, we additionally derive relationships between the queue length distributions at a random epoch and at an arrival epoch. All these relationships hold for a broad class of finite-as well as infinite-capacity queues with BMAP arrivals.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.402-407
• /
• 2013

In this paper, the image processing for flexible disk grinding and the effect of the grinding conditions on the flat zone length of a workpiece are investigated, with the purpose of automating the grinding process. To accomplish this, three issues should be carefully studied. The first is finding the relationship between the flat zone length and the grinding conditions such as the cutting speed and feeding speed. The second is developing a neural network algorithm to predict the flat zone. The third is developing an image processing algorithm to measure the flat zone length of a workpiece. Slope analysis is used to determine straight and curved sections during the image processing. For verification, the estimated length and the length from the image processing are compared with the length measured by a projector. There is a minimum difference of 1.7% between the predicted and measured values. The results of this paper will be useful in compiling a database for process automation.

• Structural Engineering and Mechanics
• /
• 제26권2호
• /
• pp.211-229
• /
• 2007

An experimental investigation to determine the transfer length of a seven-wire prestressing strand in different concretes is presented in this paper. A testing technique based on the analysis of bond behaviour by means of measuring the force supported by the prestressing strand on a series of specimens with different embedment lengths has been used. An analytical bond model to calculate the transfer length from an inelastic bond stress distribution along the transfer length has been obtained. A relationship between the plastic bond stress for transfer length and the concrete compressive strength at the time of prestress transfer has been found. An equation to predict the average and both the lower bound and the upper bound values of transfer length is proposed. The experimental results have not only been compared with the theoretical prediction from proposed equations in the literature, but also with experimental results obtained by several researchers.