• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.36-44
• /
• 2016

In this paper, an Impulse Radio-Ultra Wide band RF Transceiver for WBAN applications is implemented in $0.18{\mu}m$ CMOS technology. The designed RF transceiver support 3-5GHz UWB low band and employs OOK(On-Off Keying) modulation. The receiver employs non-coherent energy detection architecture to reduce complexity and power consumption. For the rejection of the undesired interferers and improvement of the receiver sensitivity, RF active notch filter is integrated. The VCO based transmitter employs the switch mechanism. As adapt the switch mechanism, power consumption and VCO leakage can be reduced. Also, the spectrum mask is always same at each center frequency. The measured sensitivity of the receiver is -84.1 dBm at 3.5 GHz with 1.579 Mbps. The power consumption of the transmitter and receiver are 0.3nJ/bit and 41 mW respectively.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.358-361
• /
• 1997

This paper describes a multichannel epileptic seizure detection algorithm based on wavelet transform(WT), artificial neural network(ANN) and expert system. First, through the WT, a small number of wavelet coefficients is used to represent the single channel epileptic spike. Next, 3-layer feed-forward network employing the error back propagation algorithm is trained and tested using parameters obtained above. Finally, 16 channel expert system which is based on clinical experience is introduced as a artifact rejection and reliable detection. The suggested algorithm was implemented on personal computer(PC). Two main events i.e., epileptiform and normal activities, were selected from 32 person's EEGs(normal: 20, seizure disorder: 12) in consensus among experts. The result was that WT reduced data input size and ANN detected 97 of the 100 EEGs containing definite spike - sensitivity of 97%. Expert rule system was capable of rejecting a wide variety of artifacts commonly found in EEG recordings. It also reduced false positive detections of ANN.

• Korean Journal of Human Ecology
• /
• v.7 no.3
• /
• pp.73-82
• /
• 2004

The purpose of this study was to investigate the relationship of spouse character perceived by mother's child - rearing behavior and child rearing behavior - children's social competence. The subjects of this study were 115 children's mothers in Jeon-ju city. The data were collected using questionaries and analyzed by the statistical methods of frequencies, percentages, t-test, ANOVA, pearson's correlation with SPSS pc program: The results of this study were summarized as follows: 1. There were significant differences according to economics status in spouse character Perceived by mother's. In other words. got higher income to authoritarian character and also there were significant differences according to economic status in child - rearing behavior. In other words. got higher income mother's child - rearing behavior such as rejection - blame and sensitivity. 2. There were significant differences according to economic status in children's social competence. In particular. got higher income to children's social competence such as ability and leadership. 3. There were significant differences according to economic status in relation of spouse character perceived by mother's. child - rearing behavior and children's social competence.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.875-880
• /
• 2018

This paper proposes a novel combined compensation structure in the infrared receiver chip. For the infrared communication chip, the current-voltage (I-V) convert circuit is crucial and important. The circuit is composed by the transimpedance amplifier (TIA) and the combined compensation structures. The TIA converts the incited photons into photocurrent. In order to amplify the photocurrent and avoid the saturation, the TIA uses the combined compensation circuit. This novel compensation structure has the low frequency compensation and high frequency compensation circuit. The low frequency compensation circuit rejects the low frequency photocurrent in the ambient light preventing the saturation. The high frequency compensation circuit raises the high frequency input impedance preserving the sensitivity to the signal of interest. This circuit was implemented in a $0.6{\mu}m$ BiCMOS process. Simulation of the proposed circuit is carried out in the Cadence software, with the 3V power supply, it achieves a low frequency photocurrent rejection and the gain keeps 109dB ranging from 10nA to $300{\mu}A$. The test result fits the simulation and all the results exploit the validity of the circuit.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.231-238
• /
• 2014

Optimum lot size calculation for real world manufacturing environment has been focused since last few decades. Several extensions have been made to the basic economic order and production order quantity models to realize the possible practical situations in industry. However, focus on work-in-process inventory has been ignored relatively. This paper provides a comprehensive review of the models developed for group technology based manufacturing environment focusing on work-in-process inventory. Models have been extended from a perfect manufacturing conditions to an imperfect manufacturing situation considering rework, rejection and inspection. Optimum lot size has been evaluated using a simple algebraic optimization approach. Significant parameters are highlighted using sensitivity analysis for the developed models. Numerical example is used to illustrate the utilization of such models in day-to-day production setups and the impact of significant factors' variation on total cost and optimum lot size.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.511-518
• /
• 2017

The purpose of this study was to investigate the typology of response to unwanted sexual request, and find the characteristics according to the types. For this purpose, 332 college female students were surveyed. As a results, two group were identified through cluster analysis: assertive type and compliant type. Compliant type had more sexual experiences, consensual unwanted sex, reasons for sexual compliance. Furthermore, compliant type had more unstable attachment, rejection sensitivity, and loneliness. Implications related with prevention and education program for the high risk compliant group were discussed and ideas for health, education, psychological experts were suggested.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.1024-1029
• /
• 2022

Composite scintillation screens on a base of Gd_1.2Y_1.8Ga_2.5Al_2.5O₁₂:Ce (GYAGG) scintillator have been evaluated for neutron detection. Besides the powdered scintillator, the composite includes ⁶LiF particles; both are merged with a binder and deposited onto the light-reflecting aluminum substrate. Results obtained demonstrates that screens are suitable for use with a silicon photomultiplier readout to create a prospective solution for a compact and low-cost thermal neutron sensor. Composite GYAGG/⁶LiF scintillation screen shows a pretty matched sensitivity and γ-background rejection with a widely used ZnS/⁶LiF screens however, possesses forty times faster response.

• Membrane and Water Treatment
• /
• v.3 no.3
• /
• pp.169-179
• /
• 2012

One of the major limitations in the use of commercial aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes is to maintain high performance over a long period of operation, due to the sensitivity of polyamide (PA) skin layer to oxidizing agents, such as chlorine, even at very low concentrations in feed water. This article reports surface modification of a commercial TFC RO membrane (BW30-Dow Filmtec) by covering it with a thin film of poly(vinyl alcohol) (PVA) crosslinked with glutaraldehyde (GA) to improve its resistance to chlorine. Crosslinking reaction was carried out at 25 and $40^{\circ}C$ by using PVA 1.0 wt.% solutions at different GA/PVA mass ratio, namely 0.0022, 0.0043 and 0.013. Water swelling measurements indicated a maximum crosslinking density for PVA films prepared at $40^{\circ}C$ and GA/PVA 0.0043. ATR-FTIR and TGA analysis confirmed the reaction between GA and PVA. SEM images of the original and modified membranes were used to evaluate the surface coating. Chlorine resistance of original and modified membranes was evaluated by exposing it to an oxidant solution (NaClO 300 mg/L, NaCl 2,000 mg/L, pH 9.5) and measuring water permeability and salt rejection during more than 100 h period. The surface modification effectively was demonstrated by increasing the chlorine resistance of PA commercial membrane from 1,000 ppm.h to more than 15.000 ppm.h.

• Membrane Journal
• /
• v.28 no.3
• /
• pp.169-179
• /
• 2018

The purposes of this paper were to improve both fouling and chlorine resistance by increasing the hydrophilicity of the reverse osmosis membrane. In order to improve chlorine resistance, the surface of RO membrane was activated by ultraviolet irradiation, and then it was modified by the sol-gel method using Octyltriethoxysilane (OcTES) such as the silane coupling agent to low sensitivity to chlorine, thereby the polyamide active layer was protected and chlorine resistance was improved. In addition, polyglycerol polyglycidyl ether (PGPE) and sorbitol polyglycidyl ether (SPE) coating with different number of epoxides, ring opening reaction of epoxide improved the anti-fouling resistance. The surface modification condition was optimized by FT-IR, XPS, and contact angle analysis. As a result, the permeability reduction rate of the silane-epoxy modified membrane after the fouling test was decreased about 1.5 times as compared with that of the commercial membrane. And the salt rejection was maintained over 90% at $20,000ppm{\times}hr$ even after chlorine resistance test.

• Korean Journal of Cognitive Science
• /
• v.26 no.3
• /
• pp.357-375
• /
• 2015

In our daily life, the probability of target prevalence in visual search varies from very low to high. However, most laboratory studies of visual search used a fixed probability of target prevalence at 50%. The present study examined the properties of information processing during visual search where the probability of target prevalence was manipulated to vary from low (20%), medium (50%), to high (80%). The search items were made of simple shape stimuli, and search accuracy, signal detection measures, and reaction times (RTs) were analyzed for characterizing the effect of target prevalence on the information processing strategies for visual search. The analyses showed that the rates of misses increased whereas those of false alarms decreased in the search condition of low target prevalence, whereas the pattern was reversed in the high prevalence condition. Signal detection measures revealed that the target prevalence shifted response criterion (c) without affecting sensitivity (d'). In addition, RTs for correct rejection responses in the target-absent trials became delayed as the prevalence increased, whereas those for hits in the target-present trials were relatively constant regardless of the prevalence. The RT delay in the target-absent trials indicates that increased target prevalence made the 'quitting threshold' for search termination more conservative. These results support an account that the target prevalence effect in visual search arises from a shift of decision criteria and the subsequent changes in search information processing, while rejecting the account of a speed-accuracy tradeoff.