• 제목/요약/키워드: Rejection Ratio

검색결과 216건 처리시간 0.03초

Cost Effective Silica-Based 100 G DP-QPSK Coherent Receiver

  • Lee, Seo-Young;Han, Young-Tak;Kim, Jong-Hoi;Joung, Hyun-Do;Choe, Joong-Seon;Youn, Chun-Ju;Ko, Young-Ho;Kwon, Yong-Hwan
    • ETRI Journal
    • /
    • 제38권5호
    • /
    • pp.981-987
    • /
    • 2016
  • We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.

고정밀도의 뇌파측정시스템 개발 연구 (Fabrication of EEG Measuring System with High Precision Characteristics)

  • 도영수;장호경;한병국
    • 한국의학물리학회지:의학물리
    • /
    • 제13권3호
    • /
    • pp.156-162
    • /
    • 2002
  • 본 연구에서는 뇌파 신호를 측정할 수 있는 고정밀도의 뇌파측정시스템을 제작하였다. 전치증폭기는 분리증폭기의 방식으로 잡음제거 능력을 향상하였으며, 높은 사용자 안전도를 갖도록 제작하였다. 제작된 뇌파측정시스템은 주파수 대역별로 알파, 베타, 세타로 자동으로 분류될 수 있도록 A/D 변환하였다. 변환된 데이터는 DSP를 이용하여 실시간으로 FFT처리를 하였다. 실험은 현재 병력이 없고 건강 상태가 양호한 만 20세에서 26세까지의 학생을 대상으로 실시하였다. 외부의 물리적인 자극이 뇌파에 미치는 영향을 조사하기 위하여, 현재 시판되고 있는 뇌파 자극기인 MS제품을 이용하여 시각과 청각의 두 상태로 외부자극을 주고, 그 반응을 측정하여 비교하였다. 피검자의 감성평가 측정결과 본 연구에서 제작한 뇌파측정기가 유효함을 확인하였으며, 심리적인 상태변화를 조사할 수 있었다.

  • PDF

한국우주전파관측망 129 GHz 초전도 믹서 수신기 (129 GHz SIS MIXER RECEIVER FOR KOREAN VLBI NETWORK)

  • 이정원;;;;김수연;;강용우;;한석태
    • 천문학논총
    • /
    • 제27권3호
    • /
    • pp.71-80
    • /
    • 2012
  • We have developed superconducting mixer receivers for 129 GHz VLBI observation in Korean VLBI Network (KVN). The developed mixer has a radial waveguide probe with simple transmission line L-C transformer as a tuning circuit to its 5 series-connected junctions, which can have 125 - 165 GHz as the operation radio frequency (RF). For intermediate frequency (IF) signal path a high impedance quarter-wavelength line connects the probe to one end of symmetric RF chokes. The double side band (DSB) receiver noise of the mixer was about 40 K over 4 - 6 GHz IF band, whereas we achieved the uncorrected single side band (SSB) noise temperature of about 70 K and better than 10 dB image rejection ratio in 2SB configuration with 8 - 10 GHz IF band. Insert-type receiver cartridges employing the mixers have been under commission for KVN stations.

Properties and SPICE modeling for a Schottky diode fabricated on the cracked GaN epitaxial layers on (111) silicon

  • 이헌복;백경흠;이명복;이정희;함성호
    • 센서학회지
    • /
    • 제14권2호
    • /
    • pp.96-100
    • /
    • 2005
  • The planar Schottky diodes were fabricated and modeled to probe the device applicability of the cracked GaN epitaxial layer on a (111) silicon substrate. On the unintentionally n-doped GaN grown on silicon, we deposited Ti/Al/Ni/Au as the ohmic metal and Pt as the Schottky metal. The ohmic contact achieved a minimum contact resistivity of $5.51{\times}10.5{\Omega}{\cdot}cm^{2}$ after annealing in an $N_{2}$ ambient at $700^{\circ}C$ for 30 sec. The fabricated Schottky diode exhibited the barrier height of 0.7 eV and the ideality factor was 2.4, which are significantly lower than those parameters of crack free one. But in photoresponse measurement, the diode showed the peak responsivity of 0.097 A/W at 300 nm, the cutoff at 360 nm, and UV/visible rejection ratio of about $10^{2}$. The SPICE(Simulation Program with Integrated Circuit Emphasis) simulation with a proposed model, which was composed with one Pt/GaN diode and three parasitic diodes, showed good agreement with the experiment.

침투성 구형 모델에 관한 분자 전산 연구: II. 충돌 특성 (Molecular Simulation Studies for Penetrable-Sphere Model: II. Collision Properties)

  • 김춘호;서숭혁
    • 폴리머
    • /
    • 제35권6호
    • /
    • pp.513-519
    • /
    • 2011
  • 침투 가능한 구형 모델 유체의 충돌 특성을 고찰하고자 분자 동력학 방법을 이용한 전산 모사를 수행하였다. 이로부터 다양한 범위의 입자 충전 분율 ${\phi}$ 및 척력적 에너지 ${\varepsilon}^*$ 조건에 대한 충돌 빈도수, 평균 자유 행로, 강체형 반사 충돌각 및 연체형 침투 충돌각의 분포도, 유효 충전 분율 등을 계산하였다. 낮은 척력적 에너지 조건에서는 연체형 충돌이 주된 특성이나, 반면 높은 척력적 에너지 조건에서는 강체형 충돌이 주된 요인이었다. 매우 흥미롭게도, 전체 충돌 빈도수에 대한 연체형 충돌비(또는, 강체형 충돌비)는 정준 앙상블의 몬테카를로 전산 모사에서 받아들임 확률(또는, 되돌림 확률)로 표시되는 볼쯔만 인자와 직접적으로 관계되었다. 이와 같은 거동 입자들의 동적 충돌 특성들은 ${\varepsilon}^*{\geqq}3.0$${\phi}{\geqq}0.7$ 범위의 높은 척력적 에너지 및 높은 충전 분율 조건에서 제한적이었으며, 이는 침투성 구형 모델에서 나타나는 클러스터 형성 구조를 함축하고 있다.

Double Boost Power-Decoupling Topology Suitable for Low-Voltage Photovoltaic Residential Applications Using Sliding-Mode Impedance-Shaping Controller

  • Tawfik, Mohamed Atef;Ahmed, Ashraf;Park, Joung-Hu
    • Journal of Power Electronics
    • /
    • 제19권4호
    • /
    • pp.881-893
    • /
    • 2019
  • This paper proposes a practical sliding-mode controller design for shaping the impedances of cascaded boost-converter power decoupling circuits for reducing the second order harmonic ripple in photovoltaic (PV) current. The cascaded double-boost converter, when used as power decoupling circuit, has some advantages in terms of a high step-up voltage-ratio, a small number of switches and a better efficiency when compared to conventional topologies. From these features, it can be seen that this topology is suitable for residential (PV) rooftop systems. However, a robust controller design capable of rejecting double frequency inverter ripple from passing to the (PV) source is a challenge. The design constraints are related to the principle of the impedance-shaping technique to maximize the output impedance of the input-side boost converter, to block the double frequency PV current ripple component, and to prevent it from passing to the source without degrading the system dynamic responses. The design has a small recovery time in the presence of transients with a low overshoot or undershoot. Moreover, the proposed controller ensures that the ripple component swings freely within a voltage-gap between the (PV) and the DC-link voltages by the small capacitance of the auxiliary DC-link for electrolytic-capacitor elimination. The second boost controls the main DC-link voltage tightly within a satisfactory ripple range. The inverter controller performs maximum power point tracking (MPPT) for the input voltage source using ripple correlation control (RCC). The robustness of the proposed control was verified by varying system parameters under different load conditions. Finally, the proposed controller was verified by simulation and experimental results.

SIP 프록시 큐의 비선형적 과부하 제어 방법 (A Non-Linear Overload Control Scheme for SIP Proxy Queues)

  • 이종민;전흥진;권오준
    • 한국시뮬레이션학회논문지
    • /
    • 제19권4호
    • /
    • pp.43-50
    • /
    • 2010
  • 최근 인터넷 전화는 기존 유선 전화에 비해 적은 비용으로 통화를 할 수 있다는 장점으로 인해 많은 인터넷 사용자들에 의해 사용되어지고 있다. Session Initiation Protocol(SIP)은 인터넷 전화의 세션 설정 및 해제를 위한 응용계층 프로토콜 표준이다. SIP는 주로 전송을 위해 UDP를 사용하고 있다. 따라서 INVITE 요청 메시지가 유실되는 경우, UDP 메시지의 신뢰성 있는 전송을 위하여 그 메시지는 적절한 타이머에 의해 재전송된다. 재전송은 사용자에 의해 보내진 메시지의 신뢰성 보장을 위해 유용할 지라도, SIP 프록시(Proxy) 서버의 과부하를 초래하는 원인이 되기도 한다. SIP 프록시 서버의 과부하로 인하여 입력되는 메시지가 많이 유실될 수 있다. 본 논문에서는 프록시 서버의 과부하를 효율적으로 해결하기 위한 비선형 과부하 제어 알고리즘을 제안한다. 제안된 알고리즘은 ns-2 시뮬레이터를 이용하여 성능을 시뮬레이션하였다. 시뮬레이션 결과는 기존의 선형 과부하 제어 알고리즘에 비해 제안된 알고리즘의 프록시 서버의 처리율이 약 12%정도 향상됨을 알 수 있었다.

Predictors of Avascular Necrosis after Kidney Transplantation

  • Ko, Young Min;Kwon, Hyunwook;Chun, Sung Jin;Kim, Young Hoon;Choi, Ji Yoon;Shin, Sung;Jung, Joo Hee;Park, Su-Kil;Han, Duck Jong
    • 대한이식학회지
    • /
    • 제31권4호
    • /
    • pp.200-206
    • /
    • 2017
  • Background: Risk factors for bone avascular necrosis (AVN), a common late complication after kidney transplantation (KT), are not well known. Methods: Patients that underwent living-donor KT at Asan Medical Center between January 2009 and July 2016 were included in this retrospective study to determine the incidence and risk factors for AVN after KT. Results: Among 1,570 patients that underwent living-donor KT, 33 (2.1%) developed AVN during a mean follow-up of 49.8±25.0 months. Additionally, AVN was diagnosed at a mean of 13.9±6.6 months after KT. The mean cumulative corticosteroid dose during the last follow-up in patients without AVN (9,108±3,400 mg) was higher than that that in patients with AVN (4,483±1,114 mg) until AVN development (P<0.01). More patients among those with AVN (n=4, 12.1%) underwent steroid pulse treatment because of biopsy-proven rejections during the first 6 months after KT than patients without AVN (n=68, 4.4%; P=0.04). Female (hazard ratio [HR], 2.29; P=0.04) and steroid pulse treatment during the first 6 months (HR, 2.31; P=0.02) were significant AVN risk factors as revealed by the Cox proportional multivariate analysis. However, no significant differences in rejection-free graft survival rates were observed between the two groups (P=0.67). Conclusions: Steroid pulse treatment within 6 months of KT and being female were independent risk factors for AVN development.

Real-time 14N NQR-based sodium nitrite analysis in a noisy field

  • Mohammad Saleh Sharifi;Ho Seung Song;Hossein Afarideh;Mitra Ghergherehchi;Mehdi Simiari
    • Nuclear Engineering and Technology
    • /
    • 제55권12호
    • /
    • pp.4570-4575
    • /
    • 2023
  • Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

임베디드 직렬 다중 생체 인식 시스템 개발에 관한 연구 (A Study on the Development of Embedded Serial Multi-modal Biometrics Recognition System)

  • 김정훈;권순량
    • 한국지능시스템학회논문지
    • /
    • 제16권1호
    • /
    • pp.49-54
    • /
    • 2006
  • 현재의 지문 인식 시스템은 지문 패턴의 복제와 지문 특징점의 해킹이라는 불안한 요소가 잠재되어 있어, 시스템 오동작의 주요 원인이 되기도 한다. 이에 본 논문에서는 신체의 일부인 지문을 주 핵심 인식기로 사용하고, 여기에 최근 널리 이용 되고 있는 화자 인증을 이용하여 직렬 형태의 다중 생체인식 시스템을 구현하였다. 구현된 시스템은 다중생체인식시스템으로 먼저 음성에 대한 인증과정이 성공하면 지문에 대한 인식과정을 수행하는 구조로 되어있다. 또한 효율적인 실시간 인증 처리를 위해 기존의 음성 인식 알고리즘 중에서 화자 종속형인 DTW(Dynamic Time Waning) 알고리즘을 사용하였으며, 지문 인식 알고리즘으로는 계산량을 고려하여 인공지능 기법인 KSOM(Kohonen Self-Organizing feature Map) 알고리즘을 적용하였다. 본 논문에서 구현한 다중생체 인식시스템을 실험한 결과 지문과 음성을 각각 이용한 단일인식시스템보다 본인거부율은 $2\~7\%$정도 떨어졌지만, 인식시스템에서 가장 중요한 요소인 타인수락율은 전혀 발생하지 않음을 확인하였다. 아울러 인식테스트 시간 또한 기존의 단일 생체 인식 시스템과 차이가 거의 없었으며, 인식에 걸린 시간은 평균 1.5초 정도였다. 이에 구현된 다중 생체 인의 시스템은 여러 가지 실험 결과 단일 인식 시스템보다 더 효율적인 보안 시스템임을 증명하였다.