• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.147-152
• /
• 2018

Recently, as the demand for transmission of ultra-high quality media data such as UHD, AR, and VR increases, various technologies for this have been actively developed and IEEE 802.11ad standard have been commercialized. In this paper, a test bed is constructed to analyze the indoor wireless environment using the IEEE 802.11ad standard based on mmWave, and the experimental results of various indoor wireless environments are introduced and analyzed. We compared the data from the module by data transmission, such as signal to noise ratio(SNR) and throughput. And we measured the beam pattern and width of the module and compared the effects on the indoor environment of the corridor and the office. This shows that the signal reflection of the wall shows higher SNR values and is more suitable to use for indoor than outdoor. It is confirmed that the loss when not in line of sight(LoS) is not enough to compensate the wall reflected signal. As a result, it is judged to be suitable for the indoor use of the mmWave LAN and can be usefully used for further experiments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.87-95
• /
• 2018

This paper introduces a new explicit spectral element method for the simulation of SH-waves in semi-infinite domains. To simulate the wave motion in unbounded domains, it is necessary to reduce the infinite extent to a finite computational domain of interest. To prevent the wave reflection from the trunctated boundaries, perfectly matched layer(PML) wave-absorbing boundary is introduced. The forward problem for simulating SH-waves in PML-truncated domains can be formulated as second-order PDEs. The second-order semi-discrete form of the governing PDEs is constructed by using a mixed spectral elements with Legendre-gauss-Lobatto quadrature method, which results in a diagonalized mass matrix. Then the second-order semi-discrete form is transformed to a first-order, whose solutions are calculated by the fourth-order Runge-Kutta method. Numerical examples showed that solutions of SH-wave in the two-dimensional analysis domain resulted in stable and accurate, and reflections from truncated boundaries could be reduced by using PML boundaries. Elastic wave propagation analysis using explicit time integration method may be apt for solving larger domain problems such as three-dimensional elastic wave problem more efficiently.

• Korean Journal of Materials Research
• /
• v.21 no.10
• /
• pp.573-579
• /
• 2011

Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.191-199
• /
• 2014

Wave reflection and transmission characteristics in waveguides are an important issue in many engineering applications. A combined spectral element and finite element (SE/FE) method is used to investigate the effects of local non-uniformities but limited at relatively low frequencies because the SE is formulated by using a beam theory. For higher frequency applications, a method named a combined spectral super element and finite element (SSE/FE) method was presented recently, replacing spectral elements with spectral super elements. This SSE/FE approach requires a long computing time due to the coupling of SSE and FE matrices. If a local non-uniformity has a uniform cross-section along its short length, the FE part could be further replaced by SSE, which improves performance of the combined SSE/FE method in terms of the modeling effort and computing time. In this paper SSEs are combined to investigate the characteristics of waves propagating along waveguides possessing geometric non-uniformities. Two models are regarded: a rail with a local defect and a periodically ribbed plate. In the case of the rail example, firstly, the results predicted by a combined SSE/FE method are compared with those from the combined SSEs in order to justify that the combined SSEs work properly. Then the SSEs are applied to a ribbed plate which has periodically repeated non-uniformities along its length. For the ribbed plate, the propagation characteristics are investigated in terms of the propagation constant.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.624-627
• /
• 2008

After announcing a special law for promotion of urban regeneration, urban regeneration project expand a scale. The urban regeneration project is purposing of increasing the public well-being and elavation quality of life citizen. But it is comprehention the making many conflict in phase of project promotion. A project is taken participation many stakeholds. So it is generated a multiplicity of conflict. It is survey placing an example of conflict to basis of paper news. So an example of conflict is studied total 44. Among of them, phase of project operation and management disposial was occupied to many ratios. The participation of the residents made only to specify the project district. What doesn't reflect the opinion of residents cause of after approved to specify It is classified those conflicts by procedure to study. It will make reduce the government role and between the residents and contractor will enable coordination comment in way to resolve conflicts between the subject's participation. That is to say, reflection the opinions of residents to actively of way is presenting variation of the process and change in the choice way of construction company.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.81-87
• /
• 2012

This paper focuses on three-dimensional measurement system of micro balls on micro Ball-Grid-Array(BGA) packages in-line. Most of visual inspection system still suffers from sophisticate reflection characteristics of micro balls. For accurate shape measurement of them, a specially designed visual sensor system is proposed under the sensing principle of phase shifting moire interferometry. The system consists of a pattern projection system with four projection subsystems and an imaging system. In the projection system, four subsystems have spatially different projection directions to make target objects experience the pattern illuminations with different incident directions. For the phase shifting, each grating pattern of subsystem is regularly moved by PZT actuator. To remove specular noise and shadow area of BGA balls efficiently, a compact multiple-pattern projection and imaging system is implemented and tested. Especially, a sensor fusion algorithm to integrate four information sets, acquired from multiple projections, into one is proposed with the basis of Bayesian sensor fusion theory. To see how the proposed system works, a series of experiments is performed and the results are analyzed in detail.

• Journal of The Korean Association of Information Education
• /
• v.16 no.1
• /
• pp.107-121
• /
• 2012

The purpose of this study is to develop online synchronous discussion tool based on De Bono's six thinking hats and to investigate availability and improvements of the tool. Analysis of previous studies about synchronous online discussion and six thinking hats and development of design strategies from 3C model, communication, coordination, cooperation, were done. Six thinking hats online synchronous discussion tool was developed and applied four times for 5 weeks in the 'fundamentals of computer science' course of college students majored in computer science. Qualitative data from open-ended survey and reflection paper of students, and field note of participant researchers were analyzed. As a result, six thinking hats online synchronous discussion tool facilitated student's interaction and communication in the aspect of communication, coordination, and cooperation of 3C model. However, some improvements are needed to overcome the limits of text-based online communication and to use six thinking hats online synchronous discussion tool as a tool to promote structured interaction and communication.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.486-493
• /
• 2002

In this paper, we proposed the effective multispectral image compression method using CIBP(classified interband bidrectional prediction) and extended SPIHT(set partition in hierarchical trees) in wavelet domain. We determine separately feature bands that have the highest correlation with other bands in the visible range and in the infrared range of wavelengths. Feature bands are coded to remove the spatial redundancy with SPIHT in the wavelet domain. Prediction bands that have high correlation with feature bands are wavelet transformed and they are classified into one of three classes considering reflection characteristics of the baseband. For Prediction bands, CIBP is performed to reduce the spectral redundancy. for the difference bands between prediction bands and the predicted bands, They are ordered to upgrade the compression efficiency of extended SPIHT with the largest error magnitude. The arranged bands are coded to compensate the prediction error with extended SPIHT. Experiments are carried out on the multispectral images. The results show that the proposed method reconstructs higher quality images than images reconstructed by the conventional methods at the same bit rate.

• Journal of The Korean Association For Science Education
• /
• v.36 no.3
• /
• pp.457-470
• /
• 2016

We investigated the conceptual and methodological characteristics of self-study as an innovational way with reflective research methods and explored the possibility of application of self-study in the field of science education by reviewing previous researches done in foreign countries. The results show that Self-study in education means the study of self, self-practice, self-thought, and so on in the teaching and learning context. It is a kind of new research method to pursue the improvement of teaching and learning practice with integrated perspectives on the context of instruction, identities of members, their beliefs and values, innovation agenda for better education, etc. This can be attained by collective and critical reflection in doing research. Most previous articles on the methodology of self-study suggested that the self-study should be more than just daily journals written only by her/him self. To do self-study in the academic way, they requested interaction with critical and cooperative colleagues, multiple but strict qualitative research methods, and participants' efforts for making better practice in instruction. Similar features to the above are found in the previous 14 self-study papers related to science education done in foreign countries. Based on the results, we concluded that self-study could be applied usefully into the field of science education in Korea. This paper could contribute to stimulation in the innovation of science instruction in a more practical way by increasing the attention to self-study and provoking its practice in Korea.

• Journal of The Korean Association For Science Education
• /
• v.33 no.5
• /
• pp.911-931
• /
• 2013

The purpose of this study was to analyze pre-service teachers' reflective discussion on their practical work-based teaching by focusing on the components of instruction and the connectivity of discussion. Eight after-class discussions were recorded and transcribed, and finally analyzed in terms of theoretically driven categories such as aims, teacher knowledge and learner response which also respectively reflect the actual flow of planning, implementation and evaluation of the teaching practice. The result showed that in their discussion about students, conceptual understanding and scientific skill components were most emphasized, while teaching method and strategy were most frequently addressed in the discussion about teacher knowledge. But this also revealed problems in their discussions such as the lack of discussion about inquiry and student interest, difficulties in clarifying theoretical terms and the lack of discussion about instructional models and theories. Meanwhile, pre-service teachers' discussions were limited in terms of connectivity between the components of instruction, meaning that their discussion tended to deal with each component separately rather than occurred in connection with each other. Furthermore, when connections were made during the discussion, only few components of instruction appeared. Based on this result, the paper suggests the need to develop tools to facilitate effective reflection in ways that incorporate various components of instruction and enhance connectivity between the components and between the instructions.