• 열처리공학회지
• /
• 제28권2호
• /
• pp.63-67
• /
• 2015

$TiO_2/Ag/TiO_2$ trilayer films were deposited with radio frequency (RF) and direct current (DC) magnetron sputtering onto the glass substrate to consider the influence of Ag interlayer on the optical properties of the films. The thickness of $TiO_2$ films was kept at 24 nm, while the thickness of Ag interlayer was varied as 5, 10, 15, and 20 nm. As-deposited $TiO_2$ single layer films show the optical transmittance of 66.7% in the visible wave-length region and the optical reflectance of 16.5%, while the $TiO_2$ films with a 15 nm thick Ag interlayer show the enhanced optical transmittance of 80.2% and optical reflectance of 77.8%. The carrier concentration was also influenced by Ag interlayer. The highest carrier concentration of $1.01{\times}10^{23}cm^{-3}$ was observed for a 15 nm thick Ag interlayer in $TiO_2/Ag/TiO_2$ films. The observed result means that an optimized Ag interlayer in $TiO_2/Ag/TiO_2$ films enhanced the structural and optical properties of the films.

• 한국안광학회지
• /
• 제7권1호
• /
• pp.75-78
• /
• 2002

파장범위 620~820nm에서 반사가 큰 $TiO_2/SiO_2$ 33층 박박 mirror를 설계하고 전자 빔 증착 방법으로 제작하였다. 다층박막은 BK7 유리 기판에 연속적으로 증착하였다. 고반사박막 설계는 중심파장 ${\lambda}_0$ 주변에 stopband가 만들어지는 것과 같은, 고굴절률을 가지는 층($n_H$)과 저굴절률을 가지는 층($n_L$)을 반복해서 하였다. 입사각 $40^{\circ}{\pm}7^{\circ}$인 투과도 측정 스펙트럼에서 전체적으로 파장범위 620~820nm에서 99.9%의 반사를 보였다. 파장이 700~740nm에서 투과도가 큰 피크를 보였다.

• 한국재료학회지
• /
• 제15권5호
• /
• pp.285-292
• /
• 2005

Anti-reflection film was coated by using spherical silica nano colloids. Silica colloid sol was reserved between two inclined slide glasses by capillary force, and particles were convectively stacked to form a film onto the substrate as the water evaporates. As the sliding speed increased, the thickness of the film decreased and the wavelength at the maximum transmittance decreased. The microstructure observed by SEM showed that silica particles were nearly close packed, which enabled the calculation of the effective refractive index of the film. The film thickness was measured by proffer and calculated from the wavelength of maximum transmittance and the effective refractive index. The effective refractive index of the film could be controlled by a subtle controlling of the coating speed and by mixing two different sized silica particles. When the 100 nm and 50 m particles were mixed at 4:1-5:1 volume ratio, the maximum transmittance of $95.2\%$ for one-sided coating was obtained. This is the one that has increased by $3.8\%$ compared to bare glass substrate, and shows that $99.0\%$ of transmittance or $1.0\%$ of reflectance can be achieved by the simple process if both sides of the substrate are coated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.410.1-410.1
• /
• 2016

Vanadium dioxide ($VO_2$) is a well-known material that exhibits a metal-semiconductor transition at 340 K, with drastic change of transmittance at NIR region. However, $VO_2$ based thermochromics accompany with low visible transmittance value and unfavorable color (brownish yellow). Herein, we demonstrate the adjustment of visible transmittance of $VO_2$ thin film by nanosphere template assisted patterning process using sol-gel method. 2-Dimenstional honeycomb shape was varied as function of diameter of nanosphere and coating conditions. The morphological geometry of the films was investigated by FE-SEM and AFM. Result shows that inversed shape of nanosphere was formed clearly and pattern width was altered according to the bead size. This structure creates the geometrical blank area from the position of nanosphere which improves the optical transmittance at the visible region. Moreover, such patterned $VO_2$ thin film not only maintains the optical switching efficiency, but also generate the gorgeous scattering effect which presumably support the glazing application.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.766-770
• /
• 2004

구형 실리카 나노 콜로이드 입자를 이용하여 반사방지막을 제조하였다. 실리카 콜로이드 현탁액을 모세관 힘을 이용하여 기울어진 두 장의 유리판 사이에 저장한 후 위의 유리를 이동시켜 반사 방지막을 코팅하였다. 상판 유리의 이동속도가 빨라질수록 막의 두께는 감소하였고, 막의 두께 변화에 따라 광 투과율이 변하였다. SEM으로 관찰된 실리카 나노 입자는 최밀충진에 가깝게 유리 기판에 부착되어 있었으며, 이로부터 고체 입자와 기공을 포함하는 막의 유효 굴절율을 구하였다. 최대의 광투과율을 나타내는 파장과 유효 굴절율로 부터 계산한 막의 두께는 SEM 사진 및 profiler로 구한 값과 잘 일치하였다. $94.7\%$의 최대 광투과율을 얻었으며, 양면으로 코팅한다면 $97.4\%$의 투과율 즉 $1.3\%$의 반사율을 얻을 수 있는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제39권2호
• /
• pp.210-215
• /
• 2002

본 연구에서는 $CO_2$ 흡수단이 있는 4.3${\mu}m$ 파장대역의 광학 필터를 전자빔 증발 장치를 이용하여 Ge와 $SiO_2$ 박막을 다층으로 설계, 제작하였다. 제작된 Ge/$SiO_2$ 다층박막 필터는 기준파장에 대하여 반가폭(FWHM) 204nm, 투과율 58.2%, 금지대역에 대하여 5% 이하의 차단특성을 나타내는 협대역 투과필터 (narrow band-pass filter: BPF)특성을 나타내었다. 광학적 대역투과필터를 사용하여, FT-IR내에 감지실을 설치하여 단식 필터(KBr+BPF)와 복식필터(BPF+BPF)의 $CO_2$ 농도별 감도특성을 비교측정 하였다. 측정시 $CO_2$의 농도는 500ppm을 단위로 500∼5000ppm의 범위까지 관찰하였는데, 복식 필터는 단식 필터에 비해 투과율이 낮았지만, 우수한 감도 특성을 보였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1132-1132
• /
• 2001

This work is a further development of the method created by G. Krivoshiev in 1996 for elimination of peel interference and prediction of fruit flesh optical density. In this investigation, as it was earlier, the objects are observed as being structured by three successive layer “AlongrightarrowOlongrightarrowB” denoting “peel-flesh-peel”. In the first version of the method the transmittances of the surface layers A and B were measured according to Kubelka-Munk theory by means of their diffuse reflectance. At that the overall transmittance T was approximated in the form of a multiplication approximation being valid for plane-parallel layers of a non-scattering material. In this work this approximation was done away with applying the theory of discontinuum, respectively Benfor's equations. As a result two mathematical models were created for non-destructive prediction of fruit flesh optical density. These models are different from the ones based solely on Kubelka-Munk theory, the destruction being marked by the terms 1n (1 - $R_{A}R_{0}$) and 1n (1 - $R_{A}R_{B}$), where: $R_{A}$ and $R_{B}$ are reflectance values for the surface layers A and B; $R_{0}$ is the average reflectance of the internal layer that could be obtained empirically by means of a preliminary measurement of sufficiently large number of physically peeled fruits of a given species and variety.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.189-192
• /
• 2018

본 연구에서는 LED칩 및 LCD 검사장비의 핵심부품인 광학 필름제조에 많이 사용되고 있는 DBR(Distributed Bragg Reflectors) 구조에 대한 시뮬레이션 방법을 개발하고 이러한 다층박막 특성 시뮬레이션을 통하여 최적의 DBR 구조를 제시하였다. 고굴절률 유전체인 $TiO_2$와 저굴절률 유전체인 $SiO_2$ 박막을 교대로 적층한 다층박막 구조에서 $TiO_2$와 $SiO_2$의 refractive index 값을 사용하여 박막의 배치 및 조합에 따른 wavelength(nm) vs. reflectance(%) 스펙트럼을 계산하였고 이 결과로 시뮬레이션을 통한 고효율 분산 브래그 반사경 최적화 설계 및 공정에 활용하여 DBR 구조 제작에 사용할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.408-411
• /
• 2018

We fabricated highly flexible Mn-doped $SnO_2$ (MTO)/Ag/MTO/polydimethylsiloxane (PDMS)/MTO multilayer transparent conducting films. To reduce refractive-index mismatching of the MTO/Ag/MTO/polyethylene terephthalate (PET), index-matching layers were inserted between the oxide-metal-oxide-structured films and the PET substrate. The PDMS layer was deposited by spin-coating after adjusting the mixing ratio of PDMS and hexane. We investigated the effects of the index-matching layer on the color and reflectance differences with different PDMS dilution ratios. As the dilution ratio increased from 1:100 to 1:130, the color difference increased slightly, while the reflectance difference decreased from 0.62 to 0.32. The MTO/Ag/MTO/PDMS/MTO film showed a transmittance of 87.18~87.68% at 550 nm. The highest value of the Haacke figure of merit was $47.54{\times}10^{-3}{\Omega}^{-1}$ for the dilution ratio of 1:130.