• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1525-1533
• /
• 2003

In the precision hot plate for wafer processing, uniform temperature of the upper plate is one of key factors affecting the quality of wafers. The state-of-the-art precision hot plates require temperature Variations less than $\pm$0.4$^{\circ}C$ during heating to 15$0^{\circ}C$, Which is difficult to be obtained only by the improvement of manufacturing techniques alone. In this study, computer aided heat transfer analysis was carried out to obtain the temperature distribution of the currently used reference hot plate for 200mm wafer. The analysis on the reference model assuming constant heat generation rate and uniform heating area showed total variation of 0.926$^{\circ}C$ at 15$0^{\circ}C$. One of the new design approaches based on the change of heating location together with different heat generation rate resulted in total variation of 0.297$^{\circ}C$ which is a 68% improvement compared to that of the reference model.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.591-597
• /
• 2014

A poled lead zirconate titanate (PZT) rectangular parallelepiped specimen was subjected to through-thickness electric fields at five loading rates and four temperatures. The rates of the electric field were 0.01, 0.10, 0.25, 0.50, and $1.00MVm^{-1}s^{-1}$; the temperatures were 20, 50, 80, and $110^{\circ}C$. From the measured polarization hysteresis responses, the so-called reference remnant polarization and strains were calculated. Using the calculated reference remnant polarization hysteresis loops, the effects of loading rates and temperature were discussed; using the calculated reference remnant strains, strain butterfly loops were calculated and compared with observations.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.69-71
• /
• 1993

Fluoride compound potentiometric cell oxygen sensors were fabricated for the measurement of oxygen pressure in the low temperature range (300。K-500。K). The disk type sensors consist of a reference Air(0$_2$):Ag, a solid electrolyte SrF$_2$, and a sensing metel Ag electrode. And the buried reference electrode type sensor have a NiO/Ni reference electrode. The open circuit emf of the cell showed high sensivity to oxygen gas (60mv) at the measuring temperature 20$0^{\circ}C$. Also, The buried reference electrode type sensor showed 30mv from 1% to 10% oxygen pressure range.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.87-94
• /
• 2004

Recently, technical trend in machine tools is focused on enhancing of speed, accuracy and reliability. The high speed usually results in thermal displacement and structural deformation. To minimize the thermal effect, precision machine tools adopt a high precision cooling system. This study proposes a temperature control for an oil cooler system using Pill control with fuzzy logic. In the cooler system, refrigerant flow rate is controlled by rotational speed of a compressor, and outlet oil temperature is selected as the control variable. The fuzzy control rules iteratively correct PID parameters to minimize the error and difference between the outlet temperature and the reference temperature. Here, ambient temperature is used as the reference one. To show the effectiveness of the proposed method, a series of experiments are conducted for an oil cooler system of machine tools, and the results are compared with the ones of a conventional Pill control. The experimental results show that the proposed method has advantages of faster response and smaller overshoot.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.192-195
• /
• 2016

본 논문에서는 저항과 BJT를 사용하지 않고 sub-threshold 영역에서 동작하는 저전압, 저전력 기준전압 발생기를 설계하였다. CTAT 전압 발생기는 두 개의 NMOS 트랜지스터를 이용하여 구성하였고, 충분한 영역의 CTAT 전압을 발생시키기 위해 바디 바이어스 회로를 이용하였다. PTAT 전압 발생기는 PTAT 전압을 생성하기 위해 MOS 트랜지스터 입력 쌍의 서로 다른 사이즈 비를 이용하는 차동증폭기 형태로 구성하였다. 제안한 회로는 $0.18-{\mu}m$ 표준 CMOS 공정으로 설계되었다. 시뮬레이션 결과로 290mV의 출력 기준 전압을 가지며, -$20^{\circ}C$ 에서 $120^{\circ}C$의 온도 변화에서 92 ppm/$^{\circ}C$의 전압 변화 지수와 전원전압 0.63V에서 15.7nW의 소모 전력을 갖는 것을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.527-530
• /
• 2016

본 논문에서는 $0.35-{\mu}m$ standard CMOS 공정에서 낮은 전력을 소모하면서 낮은 전원전압에서 동작하는 곡률보상 기능을 갖는 기준전류/전압 발생 회로를 제안한다. 제안된 회로는 weak-inversion 영역에서 동작하는 MOS 트랜지스터들을 사용함으로써 1V 이하 전원전압에서 동작할 수 있다. 시뮬레이션 결과는 제안되는 곡률보상 기술을 사용하여 기존의 곡률보상 기능이 없는 BGR 회로들처럼 종 모양이 아닌 사인 곡선과 같은 모양을 나타내 작은 TC 값을 보여준다. 제안된 회로들은 모두 0.9V의 전원전압에서 동작한다. 먼저, 기준전압 발생 회로는 176nW 전력을 소모하며, 온도 계수는 $26.4ppm/^{\circ}C$이다. 기준전류 발생 회로는 194.3nW 전력을 소모하며, 온도 계수는 $13.3ppm/^{\circ}C$이다.

• 정보통신설비학회논문지
• /
• 제9권4호
• /
• pp.141-146
• /
• 2010

In this paper, bandgap reference PTAT(Proportional to Absolute Temperature) circuit and flexible gain control of LNA(Low Noise Amplifier) which is usable in Zigbee system of 2.4GHz band are designed by TSMC $0.18{\mu}m$ CMOS library. PTAT bandgap reference circuit is proposed to minimize the instability of CMOS circuit which may be unstable in temperature changes. This circuit is designed such that output voltage remains within 1.3V even when the temperature varies from $-40^{\circ}C$ to $-50^{\circ}C$ when applied to the gate bias voltage of LNA. In addition, the LNA is designed to be operated on 2.4GHz which is applicable to Zigbee system and able to select gains by changing output impedance using 4 NMOS operated switches. The simulation result shows that achieved gain is 14.3~17.6dB and NF (Noise Figure) 1.008~1.032dB.

• Transactions on Electrical and Electronic Materials
• /
• 제5권2호
• /
• pp.71-75
• /
• 2004

This paper proposes a new bandgap reference (BGR) circuit which takes advantage of a cascode current mirror biasing to reduce the V$\_$ref/ variation, and sizing technique, which utilizes two related ratio numbers k and N, to reduce the PNP BJT area. The proposed BGR is designed and fabricated on a test chip with a goal to provide a reference voltage to the 10 bit A/D(4-4-4 pipeline architecture) converter of the CMOS Active Pixel Sensor (APS) imager to be used in X-ray imaging. The basic temperature variation effect on V$\_$ref/ of the BGR has a maximum delta of 6 mV over the temperature range of 25$^{\circ}C$ to 70$^{\circ}C$. To verify that the proposed BGR has radiation hardness for the X-ray imaging application, total ionization dose (TID) effect under Co-60 exposure conditions has been evaluated. The measured V$\_$ref/ variation under the radiation condition has a maximum delta of 33 mV over the range of 0 krad to 100 krad. For the given voltage, temperature, and radiation, the BGR has been satisfied well within the requirement of the target 10 bit A/D converter.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.376-380
• /
• 2006

Temperature distribution measured to estimate the condition of an electrical apparatus is an absolute reference for the apparatus conditions and the difference between the reference temperature and the current temperature. Because of passive thermography, without the external thermal stimulation, the difference in surface temperature between the region of interest and back ground shows that the results can apply only to the estimation or the monitoring for the condition of loose terminal and the overload pertaining to the rise in temperature. However, a thermal diffusion in the active thermography is differently generated by the structure and condition of the surface and subsurface. This paper presents a nondestructive test using this behavior and deals with the results by heat injection and cooling to the apparatus. The buried discontinuity of subsurface could be detected by these techniques.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.419-424
• /
• 2001

This paper deals with the development of a new method that can obtain heat transfer coefficient and reference tree stream temperature simultaneously. The method is based on transient heat transfer experiments using two narrow-band TLCs. The method is validated through error analysis in terms of the random uncertainties in the measured temperatures. It is shown how the uncertainties in heat transfer coefficient and tree stream temperature can be reduced. The general method described in this paper is applicable to many heat transfer models with unknown free stream temperature.