Browse > Article
http://dx.doi.org/10.3795/KSME-B.2003.27.11.1525

New Design Approach for the Uniform Temperature of Precision Hot Plates  

Park, Yong-Qwan (호서대학교 환경안전공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.27, no.11, 2003 , pp. 1525-1533 More about this Journal
Abstract
In the precision hot plate for wafer processing, uniform temperature of the upper plate is one of key factors affecting the quality of wafers. The state-of-the-art precision hot plates require temperature Variations less than $\pm$0.4$^{\circ}C$ during heating to 15$0^{\circ}C$, Which is difficult to be obtained only by the improvement of manufacturing techniques alone. In this study, computer aided heat transfer analysis was carried out to obtain the temperature distribution of the currently used reference hot plate for 200mm wafer. The analysis on the reference model assuming constant heat generation rate and uniform heating area showed total variation of 0.926$^{\circ}C$ at 15$0^{\circ}C$. One of the new design approaches based on the change of heating location together with different heat generation rate resulted in total variation of 0.297$^{\circ}C$ which is a 68% improvement compared to that of the reference model.
Keywords
Hot Plate; Heat Transfer; Modeling; Uniform Temperature; Wafer Processing;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Choi, D. H., 1999, '3-D Heat Transfer Analysis for the Mixed Convection of Heating Block Uniformly Arrayed on the PCB,' KOSEF Repert
2 Hirasawa S. Kieda S., 1991, 'Analysis on Temperature Distribution in Semiconductor Wafers Heated in A Vertical Diffusion Furnace,' Trans. of the JSME, Tokyo, Part B, Vol. 57, No. 543, pp. 3938-3943   DOI
3 Park, H. Y., 2000, 'Reliability Test Equipments for Core Parts of Semiconductor Equipments,' Journal of the KSME, Vol. 40, No.9, pp 39-43
4 Hiroi, M., 1997, 'Hot Plate 加熱 維持の 劣化と その 防止,' 日本油化學會誌, Vol. 46, No. 10, pp. 1147-1158
5 Park, S. H, Shin, D. J., 2002, 'A Study on the Heat Transfer Characteristics Near the Forced Air-Cooled Module According to the Flow Angle,' Trans. of the KSME(B), Vol. 26, No.9, pp. 1267-1275   과학기술학회마을
6 Lee, J. U., Ashley, F. E., 1998, 'A Numerical Study for Natural Convective Heat Transfer by Finite Element Method,' Trans. of the KSME, Vol. 7, No.1, pp. 113-121   과학기술학회마을
7 Hirasawa S. and Uchino T., 1990, 'Analysis on Temperature Distribution in A Semiconductor Wafer during Rapid Thermal Annealing with Lamp Heaters,' Trans. of the JSME, Tokyo, Part B, Vol. 56, No. 525, pp. 1511-1515   DOI
8 Yokoyama K. and Ichimiya R., 1990, 'FEM Temperature Analysis of Workpiece with Shape Change Shortening of CPU Time by Calculation Involving Nodes Movement,' Trans. of the JSME, Tokyo, Part C, Vol. 56, No. 524, pp. 1034-1040   DOI
9 Mori M. and Kondo M., 1993, 'Temperature and Thermal Stress Analysis in A Structure with Uncertain Heat Transfer Boundary Conditions,' Trans. of the JSME, Tokyo, Part A, Vol. 59, No. 562, pp. 1514-1518   DOI
10 Kazeminejad, H., Ghamari, 1996, 'Numerical Study of Convective Heat Transfer from A Blunt Plate at Low Reynolds Number,' International Journal of Heat and Mass Transfer, Oxford, UK, Elsevier Science. Ltd, Vol. 39, No. 1, pp. 125-133   DOI