• 제목/요약/키워드: Reference generator

검색결과 312건 처리시간 0.03초

유전자 알고리즘을 이용한 DNA 서열 생성 시스템의 효율적인 구현에 대한 연구 (Implementation of efficient DNA Sequence Generate System with Genetic Algorithm)

  • 이은경;이승렬;김동순;정덕진
    • 전자공학회논문지SC
    • /
    • 제43권5호
    • /
    • pp.44-59
    • /
    • 2006
  • DNA 컴퓨터의 계산 수준을 분자 수준으로 끌어내려 막대한 병렬성을 확보하고, 보다 효율적인 정보 처리를 가능케 해 차세대 컴퓨팅 기법으로서의 위치를 확고히 하고 있다. 그러나 DNA 컴퓨팅은 실제 실험을 통해 계산 모델 및 알고리즘을 검증하기 때문에 많은 연산 시간을 필요로 한다. 따라서 빠른 계산 모델 및 알고리즘의 검증을 위해 시뮬레이터인 NACST가 개발되었다. 그러나 NACST에 포함된 서열생성 시스템의 반복적인 연산 특징 때문에 이 또한 많은 연산시간을 필요로 하게 되었다. 따라서 시뮬레이션 시간 단축을 위한 서열생성 시스템의 효율적인 하드웨어 구조가 요구된다. 이에 본 논문은 DNA 코드 최적화 부분의 연산시간이 NACST 연산시간의 약 95% 이상을 차지한다는 점을 착안하여 DNA 서열 생성 시스템에 병렬 기법과 Pipeline 기법을 적용하였고 적합도 함수 간 연산을 공유시켜 연산의 양을 대폭 줄이고 분배해 시뮬레이션 시간을 크게 줄일 수 있는 하드웨어 구조를 제안하고 검증하였다. 실험 결과 제안된 하드웨어는 기존 소프트웨어에 비해 약 467배 이상의 연산시간 감소를 보였으며 DNA 서열 생성 성능은 기존과 동일함을 보였다.

플랫 판넬표시장치용 DC-DC 컨버터 집적회로의 설계 (A Integrated Circuit Design of DC-DC Converter for Flat Panel Display)

  • 이준성
    • 전자공학회논문지
    • /
    • 제50권10호
    • /
    • pp.231-238
    • /
    • 2013
  • 본 논문은 플랫판넬 디스플레이 장치에 사용할 DC-DC 변환기의 설계에 관한 것이다. 6~14[V]의 단일 DC 전원전압으로부터 플랫 판넬 백바이어스용 -5[V] DC 전압 발생회로(Negative DC Voltage Generator)와 승압된 15[V], 23[V] DC 전압 발생회로, 그리고 강압된 3.3[V] DC를 얻기 위한 회로를 설계하였다. 또한 기준 전압원으로 사용하기 위한 밴드갭 회로와 발진기, 레벨변환기 회로, 고온보호 회로 등을 설계하였다. 제작공정은 부(-)전압으로 동작하는 회로와 기타 회로를 분리하기 위해서 트리플-웰(Triple-Well)구조가 적용된 공정 내압 30[V], 최소선폭 0.35[${\mu}m$], 2P_2M CMOS 공정을 사용하였다. 설계된 모든 회로는 시뮬레이션으로 검증하여 동작을 확인하였으며 원 칩으로 제작하여 플랫판넬 디스플레이 장치에 응용할 수 있도록 기능을 확보하였다.

디젤 발전기 폐열을 활용한 태양열원 해수담수기의 설계변수에 따른 성능 예측에 관한 연구 (Study on Prediction of Performance with Design Variables of Solar-Assisted Still Using Waste Heat from Diesel Generator)

  • 장현;이중섭;서정세;정경열;박창대
    • 대한기계학회논문집B
    • /
    • 제37권12호
    • /
    • pp.1061-1068
    • /
    • 2013
  • 본 연구에서는 선행연구에서 제시된 태양열원식 해수 담수기 모델에 디젤 발전기 폐열을 적용하였을 때 설계변수에 따른 담수량을 수치해석을 통하여 예측하고, 최적설계를 위한 자료를 제시하고자 하였다. 선행연구를 기초로 수학적 모델을 설정하였고, 폐열 회수관으로부터의 열교환량을 고려하였다. 해석의 결과를 선행연구의 결과와 비교 분석하여 해석의 타당성을 확보하였고, 타당성이 검증된 해석모델을 적용하여 여러 가지 설계 변수에 따른 담수량을 예측하였다. 결과적으로 선행연구와 전반적으로 일치한 해석결과를 확인하였고, 디젤 발전기 폐열을 적용하였을 때 담수량 향상정도를 확인하였다. 또한 수치해석을 통하여 최적의 효용단 수, 유리덮개 경사각 등을 결정하였다.

Experimental investigation of impact-sliding interaction and fretting wear between tubes and anti-vibration bars in steam generators

  • Guo, Kai;Jiang, Naibin;Qi, Huanhuan;Feng, Zhipeng;Wang, Yang;Tan, Wei
    • Nuclear Engineering and Technology
    • /
    • 제52권6호
    • /
    • pp.1304-1317
    • /
    • 2020
  • The tubes in a heat exchanger, such as a steam generator (SG), are subjected to crossflow, and interaction between tubes and supports can happen, which can cause fretting wear of tubes. Although many experiments and models have been established, some detailed mechanisms are still not sufficiently clear. In this work, more attention is paid to obtain the regulation of impact and sliding in the complex process and many factors, such as excitation forces and clearances. The responses and contact forces were analyzed to obtain clear understanding of the influences of these factors. Room temperature tests in the air were established. The results show that the effect of clearance on the normal work rate is not monotonous and instead has two peaks. The force ratio can influence the normal work rate by changing the distribution of contact angles, which can result in higher sliding in the contact process. Fretting wear tests are conducted, and the wear surfaces are analyzed by a scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDX). The results of this work can serve as a reference for impactsliding contact analysis between AVBs and tubes in steam generators.

패키지후 프로그램을 이용 스큐 수정이 가능한 광범위한 잠금 범위를 가지고 있는 이중 연산 DLL 회로 (A Wide - Range Dual-Loop DLL with Programmable Skew - Calibration Circuitry for Post Package)

  • 최성일;문규;위재경
    • 대한전자공학회논문지SD
    • /
    • 제40권6호
    • /
    • pp.408-420
    • /
    • 2003
  • 이 논문에서는 1) 넓은 잠금 범위를 위한 이중 루프 동작과 2) 차세대 패키지 스큐 개선에 대한 전압 발생기와 안티퓨즈 회로를 사용한 프로그래머블 레프리카 딜레이, 두 가지 이점을 갖는 Delay Lock Loop(DLL)을 기술하였다. 이중 루프 동작은 차동 내부 루프 중 하나를 선택하기 위해 외부 클럭과 내부 클럭 사이의 초기 시간차에 대한 정보를 사용한다. 이를 이용하여 더 낮은 주파수로 DLL의 잠금 범위를 증가시킨다. 덧붙여서, 전압발생기와 안티퓨즈 회로를 사용한 프로그래머블 레프리카 딜레이의 결합은 패키지 공정 후에 온-오프 칩 변화로부터 발생하는 외부 클럭과 내부 클럭 사이에 스큐 제거를 해준다. 제안된 DLL은 0.16um 공정으로 제조되었고, 2.3v의 전원 공급과 42㎒ - 400㎒의 넓은 범위에서 동작한다. 측정된 결과는 43psec p-p 지터와 400㎒에서 52㎽를 소비하는 4.71psec 실효치(rms)지터를 보여준다.

IC 보호회로를 갖는 저면적 Dual mode DC-DC Buck Converter (Low-area Dual mode DC-DC Buck Converter with IC Protection Circuit)

  • 이주영
    • 전기전자학회논문지
    • /
    • 제18권4호
    • /
    • pp.586-592
    • /
    • 2014
  • 본 논문에서는 DT-CMOS(Dynamic Threshold voltage Complementary MOSFET) 스위칭 소자를 사용한 DC-DC Buck 컨버터를 제안하였다. 높은 효율을 얻기 위하여 PWM 제어방식을 사용하였으며, 낮은 온 저항을 갖는 DT-CMOS 스위치 소자를 설계하여 도통 손실을 감소시켰다. 제안한 Buck 컨버터는 밴드갭 기준 전압 회로, 삼각파 발생기, 오차 증폭기, 비교기, 보상 회로, PWM 제어 블록으로 구성되어 있다. 삼각파 발생기는 전원전압(3.3V)부터 접지까지 출력 진폭의 범위를 갖는 1.2MHz의 주파수를 생성하며, 비교기는 2단 증폭기로 설계되었다. 그리고 오차 증폭기는 70dB의 이득과 $64^{\circ}$의 위상여유를 갖도록 설계하였다. 또한 제안한 Buck 컨버터는 current-mode PWM 제어회로와 낮은 온 저항을 갖는 스위치를 사용하여 100mA의 출력 전류에서 최대 95%의 효율을 구현하였으며, 1mA 이하의 대기모드에도 높은 효율을 구현하기 위하여 LDO 레귤레이터를 설계하였으며, 또한 2개의 IC 보호 회로를 내장하여 신뢰성을 확보하였다.

도플러 효과를 기반으로한 내부 소음원의 3차원 위치 추정 (3D localization of internal noise source based on Doppler effect)

  • 배정호;성우제;이근화
    • 한국음향학회지
    • /
    • 제35권4호
    • /
    • pp.310-318
    • /
    • 2016
  • 본 연구는 해상 운항체에서 발생하는 소음원의 위치를 3차원적으로 추정하는 방법에 대해 다루었다. 해상 운항체인 선박이나 잠수함의 내부에 존재하는 소음원과 같이 근접이 어려운 경우라도 상대적으로 이동한다면 외부의 수중청음기에 수신된 신호는 도플러 효과가 발생한다. 본 연구에서는 이동 물체에 의한 도플러 효과를 바탕으로 소음원의 3차원 위치 추정 알고리즘을 제안하였다. 해상 운항체의 알고 있는 위치에 추가의 음원을 설치하여 예상되는 도플러 중심의 범위와 최단 접근점의 범위를 점차 줄여가며 최소자승법을 통하여 내부 소음원의 위치를 추정하였다. 알고리즘을 통해 계산한 값과 이론값을 비교하여 효용성을 입증하였으며, 수치시험을 통해 고정된 두 개의 외부 수중청음기와 음원 역할을 하는 수중체에 고정시킨 한 개의 신호발생기로 도플러 효과를 기반으로한 소음원의 3차원 위치 추정이 가능함을 증명하였다.

코사인 점호방식에 의한 단상 싸이클로콘버터의 설계에 관한 연구 (A Study on the Design of Single Phase Cycloconverter by Cosine Wave Crossing Control Method)

  • 김시헌;안병원;노창주
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제17권5호
    • /
    • pp.71-85
    • /
    • 1993
  • The Cycloconverter that the author is going to treat in this paper, has strong advantages over the D.C. Link Inverter in points of chattering torque problem and natural commutation. Thus, the Cycloconverter is expected to be well applied to large and low-speed machines which require better speed control at low frequency. But the control circuit of Cycloconverter has two weak points described as follows. 1) Because of its rather complicated control circuit, it is likely to be illoperating due to unexpected noise signals, thus the higher the accuracy and reliability of the circuit is required to be, the more the circuit may cost. 2) Because the load current is not purely sinusoidal, the Cycloconverter may possibly be destroyed in case of inaccurate convert switching resulted from the difficulties in detecting the load current-zero and the current direction at the moment. In this paper, the author first of all intends to design and build a modified VVVF-type Noncirculating Current Cycloconverter to which recently proposed control methods are applied for improving the circuit simplicity, the control performance, and the system reliability. And then, experiments for observing the output waveforms of the Cycloconverter which is controlled by Singled-Board Computer using 8086 16-bit microprocesser are carried out. Finally the author concludes the result of this study as follows. 1) By replacing the conventional analog control circuits such as Reference Wave Generator, Cosine Timing Wave Generator, and Comparator with softwares, a great circuit simplicity is achieved. 2) The output of the designed Cycloconverter changes its frequency very fast without showing discontinuity of its waveform, and this waveform characteristics enables the smooth speed control of Induction Motor. 3) The design control circuit of Cycloconverter can be applied to the systems of 12 or 24 pulses because of its short processing period.

  • PDF

Radiation Exposure Reduction in APR1400

  • Bae, C.J.;Hwang, H.R.;Matteson, D.M.
    • Journal of Radiation Protection and Research
    • /
    • 제28권2호
    • /
    • pp.127-135
    • /
    • 2003
  • The primary contributors to the total occupational radiation exposure in operating nuclear power plants are operation and maintenance activities doting refueling outages. The Advanced Power Reactor 1400 (APR1400) includes a number of design improvements and plans to utilize advanced maintenance methods and robotics to minimize the annual collective dose. The major radiation exposure reduction features implemented in APR1400 are a permanent refueling pool seal, quick opening transfer tube blind flange, improved hydrogen peroxide injection at shutdown, improved permanent steam generator work platforms, and more effective temporary shielding. The estimated average annual occupational radiation exposure for APR1400 based on the reference plant experience and an engineering judgment is determined to be in the order of 0.4 man-Sv, which is well within the design goal of 1 man-Sv. The basis of this average annual occupational radiation exposure estimation is an eighteen (18) month fuel cycle with maintenance performed to steam generators and reactor coolant pumps during refueling outage. The outage duration is assumed to be 28 days. The outage work is to be performed on a 24 hour per day basis, seven (7) days a week with overlapping twelve (12) hour work shifts. The occupational radiation exposure for APR1400 is also determined by an alternate method which consists of estimating radiation exposures expected for the major activities during the refueling outage. The major outage activities that cause the majority of the total radiation exposure during refueling outage such as fuel handling, reactor coolant pump maintenance, steam generator inspection and maintenance, reactor vessel head area maintenance, decontamination, and ICI & instrumentation maintenance activities are evaluated at a task level. The calculated value using this method is in close agreement with the value of 0.4 man-Sv, that has been determined based on the experience aid engineering judgement. Therefore, with the As Low As Reasonably Achievable (ALARA) advanced design features incorporated in the design, APR1400 design is to meet its design goal with sufficient margin, that is, more than a factor of two (2), if operated on art eighteen (18) month fuel cycle.

PC 클러스터링을 이용한 병렬 최적조류계산에 관한 연구 (Parallel Optimal Power Flow Using PC Clustering)

  • 김철홍;문경준;김형수;박준호;김진호;이화석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.190-193
    • /
    • 2004
  • Optimal Power Flow (OPF) is becoming more and more important in the deregulation environment of power pool and there is an urgent need of faster solution technique for on-line application. So this paper presents parallel genetic algorithm-tap search for the solution of the OPF. The control variables modeled unit active power outputs, generator-bus voltage magnitudes and transformer-tap settings. A number of functional operating constraints, such as branch flow limits, load bus boltage magnitude limits and generator reactive capabilities are included as penalties in the fitness function. In parallel GA-TS, GA operators are executed for each process. If best fitness of the GA is not changed for several generations, TS operators are executed for the upper three populations to enhance the local searching capabilities. With migration operation, best string of each node is transferred to the neighboring node after predetermined iterations are executed. For parallel computing, we developed a PC-cluster system consisting of 8 PCs. Each PC employs the 2 GHz Pentium IV CPU and is connected with others through ethernet switch based fast ethernet. To show the usefulness of the proposed method, developed algorithm has been tested and compared on an IEEE 30-bus system in the reference paper. From the simulation results, we can find that the proposed algorithm is efficient for the OPF.

  • PDF