• Journal of Nutrition and Health
• /
• 제54권6호
• /
• pp.573-583
• /
• 2021

일반적으로 에너지 필요량은 에너지 평형 상태에서의 에너지소비량으로 정의된다. 이중표식수법 (doubly labeled water, DLW)은 총에너지소비량 (total energy expenditure, TEE)을 측정하는 가장 정확한 방법으로 알려져 있다. 2002년, 미국 Institute of Medicine (IOM)은 미국인과 캐나다인을 위한 영양소 섭취기준 (dietary reference intakes, DRIs)을 제안하고, 이중표식수법 (DLW)을 이용한 연구결과들을 모아서 에너지필요추정량 (estimated energy requirement, EER) 산출식을 개발하였다. 2005년부터 한국인 영양소 섭취기준에서도 이 산출식을 이용하여 에너지필요추정량을 설정해왔다. 연령대를 기준으로 한 이 산출식에서는 체중과 신장뿐만 아니라 신체활동수준 (physical activity level, PAL)에 따른 (sedentary, low active, active, and very active) 신체활동계수 (physical activity, PA)가 적용되었다. 이중표식수법과 신체활동일기를 이용하여 산출한 한국인의 신체활동수준은 '저활동적' (1.40-1.59)에 해당되었으므로, '저활동적'에 해당하는 신체활동단계별 계수 (PA)가 에너지필요추정량 (EER) 산출식에 적용되었다. 최근 한국에서도 규칙적으로 다양한 신체활동을 하는 사람들이 증가하고 있어 '활동적 (active)'인 사람들과 '매우 활동적 (very active)'인 사람들을 위한 에너지필요추정량을 별도로 제시하였다. 앞으로 미국과 일본처럼, 한국에서도 이중표식수법 (DLW) 연구를 확대하여 한국인을 위한 에너지필요추정량 산출식이 개발되어야 한다. 또한 신체활동 일기와 새로운(한국인을 위한) 신체활동 분류표를 이용하여 신체활동수준 (PAL)을 정확하게 평가할 수 있는 표준화된 가이드라인을 마련해야한다.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1651-1655
• /
• 2011

The reference impedances which is about 95% supply impedance value of residential consumers' supply impedances was published by IEC in 1980. The reference impedances are the standard values for use in determining the voltage disturbance characteristics of electrical equipment like the flicker. In IEC 60725, the reference impedances for premises having service current capacities less than 100A per phase and for service current capacities more than 100A per phase are recommended. And these reference impedances are targeted for the countries using 50Hz power frequency. Because of the frequency difference, the reactance values of the reference impedances will be increased in 60Hz power system like Korea, And also the reference impedances are different significantly each other according to declared voltage variation, power consumption and service wire length etc. Therefore It is needed to calculate the reference impedances suitable for domestic low-voltage power system. In this paper, the reference impedances for service current capacities less than 100A in 220/380V, 60Hz single-phase two wire and three-phase four wire low-voltage system are calculated, And the equations for service current capacities more than 100A to calculate the modulus value of maximum supply impedances are suggested base on IEC 60725 and the reference impedances for those are calculated on service current of 100A per phase.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.377-387
• /
• 2005

The equations of motion of two-wheeled vehicles, e.g. bicycles or motorcycles, are developed by using Lagrange's equations for quasi-coordinates. The pure rolling constraints between the ground and the two wheels are considered in the dynamical equations of the system. For each wheel, two nonholonomic and two holonomic constraints are introduced in a set of differential-algebraic equations (DAE). The constraint Jacobian matrix is obtained by collecting all the constraint equations and converting them into the velocity form. Equilibrium, an algorithm for searching for equilibrium points of two-wheeled vehicles and the associated problems are discussed. Formulae for calculating the radii of curvatures of ground-wheel contact paths and the reference point are also given.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.126-132
• /
• 2002

By using the reference data, the empirical equations which describe the interrelationships of explosion properties and physical properties of n-chlorinated hydrocarbons have been derived. The properties which have been correlated are the lower and upper explosive limits, the stoichiometric coefficients, the heats of combustion, the carbon numbers. Also, the new equations using the mathematical and statistical methods for predicting the temperature dependence of lower explosive limits(LEL) of chlorinated hydrocarbons on the basis of the literature data are proposed. The fire and explosion properties calculated by the proposed equations in this research were a good agrement with literature data within a few A.A.P.E.(Average Absolute Percent Error) and A.A.D.(Average Absolute Deviation.) From a given explosive properties, by using the proposed equations, it is possible to predict to the fire and explosion characteristics for the other chlorinated hydrocarbons.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1099-1106
• /
• 2002

This paper provides engineering J-integral and crack opening displacement (COD) estimation equations for circumferential through-wall cracked pipes under internal pressure and under combined internal pressure and bending. Based on selected 3-D finite element calculations for the circumferential through-wall cracked pipes under internal pressure using the idealized power law materials, the elastic and plastic influence functions for fully plastic J-integral and COD solutions are found as a function of the normalized crack length and the mean radius-to-thickness ratio. These developed GE/EPRI-type solutions are then re-formulated based on the enhanced reference stress method. Such re-formulation not only provides simpler equations for J-integral and COD estimations, but also can be easily extended to combined internal pressure and bending. The proposed equations are compared with elastic-plastic finite element results using actual stress-strain data, which shows overall excellent agreement.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.14-19
• /
• 2012

There are insufficient data to consider the effect zone for the marine life of coastal fisheries, because no standard has been defined for the sound level of marine life. In this study, equations for distance attenuation were used to determine the effect zone for oceanic noises. A reference noise level was divided into 4 parts to consider the characteristics of the fishes, and the effect zone of each reference noise level was determined. To increase the reliability of the effect scope, approximately 100 repetitions of blasting work split into several parts by the boring depth, the sound level of the source caused by an increase in weight, and the effect zone were calculated using the prediction equation. According to the prediction, the maximum distance of the effect zone was 4.92 km.

• KIEE International Transactions on Power Engineering
• /
• 제3A권3호
• /
• pp.139-147
• /
• 2003

The paper presents a novel approach of constructing the state matrix of the multi-machine power system for SSR (subsynchronous resonance) analysis using the linearized equations of individual devices including electrical transmission network dynamics. The machine models in the local d-q reference frame are integrated with the network models in the common R-I reference frame by simply transforming their output equations into the R-I frame where the transformed output is used as the input to the network dynamics or vice versa. The salient feature of the formulation is that it allows for modular construction of various component models without rearranging the overall state space formulation. This universal SSR small signal stability program provides a flexible tool for systematic analyses of SSR small-signal stability impacts of both conventional devices such as generation systems and novel devices such as power electronic apparatus and their controllers. The paper also presents its application results to IEEE benchmark models.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.48-58
• /
• 2011

In this paper, an attempt has been made to design the current and speed proportional and integral (PI) regulators of self-commutating current source inverter-fed induction motor drive having capacitors at the machine end and to investigate the transient performance of the same for step changes in reference speed. The mathematical model of the complete drive system is developed in closed loop, and the characteristic equations of the systems are derived using perturbation about steady-state operating point in order to develop the characteristic equations. The D-partition technique is used for finding the stable region in the parametric plane. Frequency scanning technique is used to confirm the stability region. Final selection of the regulator parameters is done by comparing the transient response of the current and speed loops for step variations in reference. The performance of the drive is observed analytically through MATLAB simulation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권1호
• /
• pp.1-7
• /
• 2002

This paper proposes a algebraic parameter determination of MRA(Model Reference Adaptive Control) controller using block Pulse functions and block Pulse function's differential operation. Generally, adaption is performed by solving differential equations which describe adaptive low for updating controller parameter. The proposes algorithm transforms differential equations into algebraic equation, which can be solved much more easily inn a recursive manner. We believe that proposes methods are very attractive and proper for parameter estimation of MRAC controller on account of its simplicity and computational convergence.

• Journal of Mechanical Science and Technology
• /
• 제14권2호
• /
• pp.168-176
• /
• 2000

Related to the error dynamics of an adaptive system, averaging theorems are developed for coupled differential equations which consist of ordinary differential equations and a parabolic partial differential equation. The results are then applied to the convergence analysis of the parameter estimate errors in the model reference adaptive control of a nonautonomous parabolic partial differential equation with lowly time-varying parameters.