• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.536-541
• /
• 2007

In video coding standard H.264/AVC, motion estimation using multiple reference pictures improves compression efficiency but the efficiency depends upon image content not the number of reference pictures. So, the motion estimation includes a large amount of computation of no worth according to image. This paper proposes fast motion estimation algorithm that removes worthless computation in the motion estimation using multiple reference pictures. The proposed algorithm classifies a block into valid and invalid blocks for the multiple reference pictures and removes the workless computation by applying a single reference picture to the invalid block. To estimate the proposed algorithm's performance, image quality, bit rate, and motion estimation time are compared with ones of the conventional algorithm in the reference software JM 9.5. The simulation results show that the proposed algorithm can considerably save about 38.67% the averaged motion estimation time while keeping the image quality and the bit rate, whose are average values are -0.02dB and -0.77% respectively, as good as the conventional algorithm.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.11
• /
• pp.511-518
• /
• 1986

An algorithm for block-decomposition of a linear, time-invariant, discrete large-scale systems is presented, based upon the matrix sign function on Z-plane. The block-decomposition is performed by defining a reference circle, a circular stripe and projection operators. Simulation study shows that the presented algorithm is very useful for multivariable control system's analysis and design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3653-3659
• /
• 2009

Inter-prediction is always the main bottleneck in H.264/AVC baseline profile. This paper describes an efficient inter-prediction hardware architecture design. H.264/AVC decoder supports various block types but reference software considers only the $4{\times}4$ block when the reference block is being fetched. This causes duplicated pixels which needs extra fetch cycles. In order to eliminate some of the duplicated pixels, the $8{\times}8$ and $4{\times}4$ blocks were considered in the previous design. If the block size is larger than or equal to the $8{\times}8$ block, it will be decomposed into several $8{\times}8$ blocks and if the block size is smaller than the $8{\times}8$ block it will be decomposed into several $4{\times}4$ blocks. Comparing with the reference software, the maximum and minimum cycle reduction of the previous design are 41.5% and 28.2% respectively. For further reduction of the fetch cycles, the various block types are considered in this paper. As a result, the maximum cycle reduction is 18.6% comparing with the previous design.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.4
• /
• pp.165-172
• /
• 2006

In this paper we present a technique for detecting cross-reference points that allows improving watermark detect-ability. In general, Harris detector is commonly used for finding salient points. Harris detector is a kind of combined corner and edge detector which is based on neighboring image data distribution, therefore it has some limitation to find accurate salient points after watermark embedding or any kinds of digital attacks. The new method proposed in this paper used not data distribution but geometrical structure of a normalized image in order to avoid pointing error caused by the distortion of image data. After normalization, we constructed pre-specified number of virtual lines from top to bottom and left to right, and several of cross points were selected by a random key. These selected points specify almost same positions with the accuracy more than that of Harris detector after digital attacks. These points were arranged by a random key, and blocks centered in these points were formed. A reference watermark is formed by a block and embedded in the next block. Because same alteration is applied to the watermark generated and embedded blocks. the detect-ability of watermark is improved even after digital attacks.

• Korean Journal of Materials Research
• /
• v.13 no.10
• /
• pp.651-657
• /
• 2003

Ultrasonic microscope has been used to detect the defects on surface or inner solid. Conventionally, it has used at a single operating frequency. The resolution and quality of the measured images are determined by a characteristic of the transducer of the ultrasonic microscope. The conventional ultrasonic microscope has been used envelope detector to detect the amplitude of reflected signal, but the changes in amplitude is not sensitive enough for specimen with microstructure that in phase. In this paper, we have studied multi-frequency depth resolution enhancement with ultrasonic reflection microscope for the reflectors of a stainless steel reference specimen and a reference calibration block to be used as the material in nuclear power plants for ISI, PSI. Increased depth resolution can be obtained by taking two, three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion and high quality signal distribution for the image to the changing rate of depth for the reflectors of the two kinds of specimens.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1513-1525
• /
• 2016

Rapid and accurate phase synchronization is critical for the reliable control of grid-tied inverters. However, the commonly used software phase-locked loop methods do not always satisfy the need for high-speed and accurate phase synchronization under severe grid imbalance conditions. To address this problem, this study develops a novel open-loop phase locking scheme based on a synchronous reference frame. The proposed scheme is characterized by remarkable response speed, high accuracy, and easy implementation. It comprises three functional cascaded blocks: fast orthogonal signal generation block, fast fundamental-frequency positive sequence component construction block, and fast phase calculation block. The developed virtual orthogonal signal generation method in the first block, which is characterized by noise immunity and high accuracy, can effectively avoid approximation errors and noise amplification in a wide range of sampling frequencies. In the second block, which is the foundation for achieving fast phase synchronization within 3 ms, the fundamental-frequency positive sequence components of unsymmetrical grid voltages can be achieved with the developed orthogonal signal construction strategy and the symmetrical component method. The real-time grid phase can be consequently obtained in the third block, which is free from self-tuning closed-loop control and thus improves the dynamic performance of the proposed scheme. The proposed scheme is adaptive to severe unsymmetrical grid voltages with sudden changes in magnitude, phase, and/or frequency. Moreover, this scheme is able to eliminate phase errors induced by harmonics and random noise. The validity and utility of the proposed scheme are verified by the experimental results.

• Journal of Broadcast Engineering
• /
• v.27 no.4
• /
• pp.477-486
• /
• 2022

In this paper, we propose a novel intra-prediction method using convolutional neural network (CNN) to improve a quality of a predicted block in VVC. The proposed algorithm goes through a two-step procedure. First, an input prediction block is generated using one of the VVC intra-prediction modes. Second, the prediction block is further refined through a CNN model, by inputting the prediction block itself and reconstructed reference samples in the boundary. The proposed algorithm outputs a refined block to reduce residual signals and enhance coding efficiency, which is enabled by a CU-level flag. Experimental results demonstrate that the proposed method achieves improved rate-distortion performance as compared a VVC reference software, I.e., VTM version 10.0.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.12-14
• /
• 2005

In this paper, we proposed an temporal error concealment (EC) using the proposed boundary matching method and the adaptive block matching method. The proposed boundary matching method improves the spatial correlation of the macroblocks (MBs) by reusing the pixels of the concealed MB to estimate a motion vector of a error MB. The adaptive block matching method inspects the horizontal edge and the vertical edge feature of a error MB surroundings, and it conceals the error MBs in reference to more stronger edge feature. This improves video quality by raising edge connection feature of the error MBs and the neighborhood MBs. In particular, we restore a lost MB as the unit of 8${\times}$16 block or 16${\times}$8 block by using edge feature from the surrounding macroblocks. Experimental results show that the proposed algorithm gives better results than the conventional algorithms from a subjective and an objective viewpoint.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.785-790
• /
• 2019

In this paper, a new bilateral frame rate up-conversion algorithm using adaptive overlapped block motion compensation is proposed. In this algorithm, the adaptive overlapped block motion compensation is based on the motion complexity of the reference region. As the motion complexity is determined by the size of the previously coded motion estimation prediction, the overlapped block motion compensation method is selected without any additional computational complexity. Experimental results show that the proposed algorithm provides better image quality than conventional methods both objectively and subjectively.

• Coupled systems mechanics
• /
• v.8 no.4
• /
• pp.351-375
• /
• 2019

The present work investigates the use of a rigid rocking block as a tool to reduce vibrations in a frame structure. The study is based on a simplified model composed by a 2-DOF linear system, meant to represent a general M-DOF frame structure, coupled with a rocking rigid block through a linear visco-elastic device, which connects only the lower part of the 2-DOF system. The possibility to restrain the block directly to the ground, by means of a second visco-elastic device, is investigated as well. The dynamic response of the model under an harmonic base excitation is then analysed in order to evaluate the effectiveness of the coupling in reducing the displacements and the drift of the 2-DOF system. The nonlinear equations of motion of the coupled assemblage 2-DOF-block are obtained by a Lagrangian approach and then numerically integrated considering some reference mechanical and geometrical quantities as variable parameters. It follows an extensive parametric analysis, whose results are summarized through behaviour maps, which portray the ratio between the maximum displacements and drifts of the system, with and without the coupling with the rigid block, for several combinations of system's parameters. When the ratio of the displacements is less than unity, the coupling is considered effective. Results show that the presence of the rocking rigid block improves the dynamics of the system in large ranges of the characterizing parameters.