• Journal of the Korean School Mathematics Society
• /
• v.17 no.4
• /
• pp.679-695
• /
• 2014

In this paper we survey the career awareness, demand, and preparation of the students of the department of mathematics education and provide basic data for establishment of career diversification strategies. For this we examined the followings: (1) department selected time and motivation, (2) satisfaction with the selection and training courses, (3) hope and change for a career after graduation, (4) related jobs and career awareness. As a result, most of the students over the course of the high school and middle school chose a career in mathematics education, the biggest motivation appeared to be due to selection was deemed suitable for individual aptitudes. Due to this reason he/she is satisfied with the selection and training process and the curriculum of mathematics education appeared to think it would be helpful to his/her career. It can be observed that the number of students increased to think of another job, depending on the grade ascent. Mostly due to the difficulty of major study as grade up, high competition and low success rate of teacher employment test, employment reduction in the number of teachers.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.4
• /
• pp.292-299
• /
• 2009

Objective : Clinical and radiological results of posterior dynamic stabilization using interspinous U (ISU, $Coflex^{TM}$, Paradigm Spine $Inc.^{(R)}$, NY, USA) were analyzed in comparison with posterior lumbar interbody fusion (PLIF) in degenerative lumbar spinal stenosis (LSS). Methods : A retrospective study was conducted for a consecutive series of 61 patients with degenerative LSS between May 2003 and December 2005. We included only the patients completed minimum 24 months follow up evaluation. Among them, 30 patients were treated with implantation of ISU after decompressive laminectomy (Group ISU) and 31 patients were treated with wide decompressive laminectomy and posterior lumbar interbody fusion (PLIF; Group PLIF). We evaluated visual analogue scale (VAS) and Oswestry Disability Index (ODI) for clinical outcomes (VAS, ODI), disc height ratio disc height (DH), disc height/vertebral body length ${\times}100$), static vertebral slip (VS) and depth of maximal radiolucent gap between ISU and spinous process) in preoperative, immediate postoperative and last follow up. Results : The mean age of group ISU ($66.2{\pm}6.7$ years) was 6.2 years older than the mean age of group PLIF ($60.4{\pm}8.1$ years; p=0.003). In both groups, clinical measures improved significantly than preoperative values (p<0.001). Operation time and blood loss was significantly shorter and lower in group ISU than group PLIF (p<0.001). In group ISU, the DH increased transiently in immediate postoperative period ($15.7{\pm}4.5%{\rightarrow}18.6{\pm}5.9%$), however decreased significantly in last follow up ($13.8{\pm}6.6%$, p=0.027). Vertebral slip (VS) of spondylolisthesis in group ISU increased during postoperative follow-up ($2.3{\pm}3.3{\rightarrow}8.7{\pm}6.2$, p=0.040). Meanwhile, the postoperatively improved DH and VS was maintained in group PLIF in last follow up. Conclusion : According to our result, implantation of ISU after decompressive laminectomy in degenerative LSS is less invasive and provides similar clinical outcome in comparison with the instrumented fusion. However, the device has only transient effect on the postoperative restoration of disc height and reduction of slip in spondylolisthesis. Therefore, in the biomechanical standpoint, it is hard to expect that use of Interspinous U in decompressive laminectomy for degenerative LSS had long term beneficial effect.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.4
• /
• pp.183-196
• /
• 2018

In this study, we conducted in - depth interviews of young entrepreneurs who are currently in the process of establishing new entrepreneurs management diagnosis and consulting for young entrepreneurs, and found the common difficulties experienced in young entrepreneurs' perception of entrepreneurship, In addition, through a case study, we verified product suitability through customer issue / solution suitability, idea marketability verification and MVP (Minimum Viable Product) using Lean Canvas according to the structure of Lean Start-up It is aimed at voluntary management diagnosis and consulting of small business owners, activation of young entrepreneurs' entrepreneurship, and reduction of startup failure rate. The purpose of this study is to examine the items of five young entrepreneurs from the perspective of the customer for about 10 months, focusing on the case of small entrepreneurs in the small entrepreneurs support project. Or we could provide the customer's problem or solution based on Lean Start-up. This study was conducted as a case - based qualitative study due to the limited sample and it is hoped that this study will be used as a basic research to verify the effectiveness of the lean start-up methodology for small business owners through quantitative research.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.10-13
• /
• 2010

We studied the effect of $O_2$ plasma treatments on the electrical property of Ti / Al ohmic contacts to N-face n-type GaN. The surface of N-face, n-type GaN has been treated with $O_2$ plasma for 120 s before the deposition of bilayered electrodes, Ti (50 nm) / Al (35 nm), and its contact resistance was compared with that of the reference sample without $O_2$ plasma. As a result, we found that the ohmic contact was reduced from $4.3\;{\times}\;10^{-1}\;{\Omega}cm^2$ to $1.25\;{\times}\;10^{-3}\;{\Omega}cm^2$ by applying $O_2$ plasma on the surface of n-type GaN, which was attributed to the reduction in the Schottky barrier height (SBH), caused by nitrogen vacancies formed during the $O_2$ plasma process.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.130-137
• /
• 2008

$La_{0.7}Sr_{0.3}MnO_3$ films were deposited on $SiO_2$/Si and Si substrates annealed at $350^{\circ}C$ by rf magnetron sputtering. The oxygen gas flow rates were varied as 0, 40, and 80 sccm. Without post annealing process, $La_{0.7}Sr_{0.3}MnO_3$ thin films on $SiO_2$/Si and Si substrates were polycrystalline with (100), (110), and (200) growth planes. The grain size of $La_{0.7}Sr_{0.3}MnO_3$ thin films was increased with increasing oxygen gas flow rate. The sheet resistance of $La_{0.7}Sr_{0.3}MnO_3$ thin films was decreased with oxygen flow rate due to the increased grain size which induced a reduction of grain boundary. TCR (temperature coefficient of resistance) values of $La_{0.7}Sr_{0.3}MnO_3$ thin films were obtained from -2.0% to -2.2%.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.20-26
• /
• 2001

The deposition characteristics of MOCVO Cu using the (hfac)Cu(I) (1,5-DMCOD)(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato Cu(I) 1,5-dimethyl-cyclooctadine) as a precursor have been investigated in terms of the effects of hydrogen and H(hfac) ligand addition with He carrier gas. MOCVD Cu using a Helium carrier gas showed a low deposition rate (20~$125{\AA}/min$) at the substrate temperature range of 180~$230^{\circ}C$. Moreover, the Cu film deposited at 19$0^{\circ}C$ was very thin (~$700{\AA}$) and showed the lowest resistivity value of $2.8{\mu}{\Omega}-cm$. The deposition rate of MOCVD Cu using $H_2$or H(hfac) addition was significantly enhanced especially at the low temperature region (180~$190^{\circ}C$). Furthermore, thinner Cu films (~$500{\AA}$) provided low resistivity (3.6~$2.86{\mu}{\Omega}-cm$). From surface reflectance measurement, very thin films deposited by using different gas system revealed good surface morphology comparable with sputtered Cu film ($300^{\circ}C$, vacuum-anneal). Hence, Cu film using (hfac)Cu(1,5-DMCOD) as a precursor is expected as a good seed layer in the electrochemical deposition process for Cu metallization.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.419-427
• /
• 2018

The purpose of this study is to recycle steel slag generated from the iron producing process and to use steel slag as a construction material which is currently landfilled Steel slag is subjected to aging treatment due to the problem of expansion and collapse when it reacts with water. The Slag Atomizing Technology (SAT) method developed to solve these problems of expanding collapse of steel slag. In this study, experimental study on the emergency repair mortar using the reducing slag, electric arc furnace slag and silicon manganese slag manufactured by the SAT method is Reduced slag was shown an accelerated hydration when it was replaced with rapidly-setting cement, and the rate of substitution was equivalent to 15%. It is shown that the electric furnace oxide slag is equivalent to 100% of the natural aggregate, and it can be replaced by 15-30% when the silicon manganic slag is substituted for the electric furnace oxide slag. With the above formulation, it was possible to design the rapidly repair mortar for road use. These recycling slags can contribute on achieving sustainability of construction industry by reducing the use of cement and natural aggregates and by reducing the generation of carbon dioxide and recycling waste slag.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.901-908
• /
• 2006

With the development of wireless communication techniques and mobile environment we are able to transmit data between mobile systems without restriction of time and space. Recently, researches on the data communication between mobile systems have focused on a small amount of sending out or receiving data and data synchronization at a fixed server and mobile clients in mobile environment. However, two more servers should be able to move mutual independently, information is shared with other systems, and data is synchronized in the special environment like a battlefield situation. Therefore, we propose a data synchronization method between systems moving mutual independently in mobile environment. The proposed method is an optimization solution to data propagation path between servers that considers limited bandwidth and process of data for disconnection communication. In addition, we propose a data reduction method that considers importance and sharing of information in order to reduce data transmission between huge servers. We verified the accuracy of data after accomplishing our data synchronization method by applying it in the real world environment. Additionally, we showed that our method could accomplish data synchronization normally within an allowance tolerance when we considered data propagating delay time by server extension.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.3-13
• /
• 2002

The characteristics of cyanide decomposition in aqueous phase by hydrogen peroxide have been explored in an effort to develop a process to recycle waste water. The self-decomposition of $H_2O$$_2$at pH 10 or below was minimal even in 90 min., with keeping about 90% of $H_2O$$_2$undissociated. On the contrary, at pH 12 only 9% of it remained during the same time. In the presence of copper catalyst at 5 g Cu/L, complete decomposition of $H_2$O$_2$was accomplished at pH 12 even in a shorter time of 40 min. The volatility of free cyanide was decisively dependent on the solution pH: the majority of free cyanide was volatilized at pH 8 or below, however, only 10% of it was volatilized at pH 10 or above. In non-catalytic cyanide decomposition, the free cyanide removal was incomplete in 300 min. even in an excessive addition of $H_2$$O_2$at a $H_2$$O_2$/CN molar ratio of 4, with leaving behind about 8% of free cyanide. On the other hand, in the presence of copper catalyst at a Cu/CN molar ratio of 0.2, the free cyanide was mostly decomposed in only 16 min. at a reducedH202/CN molar ratio of 2. Ihe efnciency of HBO2 in cyanide decomposition decreased with increasing addition of H2O2 since the seu-decomposition rate of $H_2$$O_2$increased. At the optimum $H_2$$O_2$/mo1ar ratio 0.2 of and Cu/CN molar ratio of 0.05, the free cyanide could be completely decomposed in 70 min., having a self-decomposition rate of 22 mM/min and a H$_2$$O_2$ efficiency of 57%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.613-619
• /
• 2017

Recently, the development and production of weapons systems for military products have been increasing. Therefore, there is a need for an efficient quality control method suitable for limited resources and manpower for the manufactured military products. Military munitions are characteristically developed and produced as business contract units. In addition, business and quality control are done by contract. For this reason, many contracts are concluded in one producer and similar products are often produced. Business and quality control also require extensive manpower and effort. If a company produces several similar products, a more efficient management approach is required. This study therefore examines these problems in an attempt to present solutions by analyzing the types of munitions contracts and the characteristics of products produced by one company. Based on the results, a method is proposed to manage the contract-specific management methods by company, that is, by business site. The method is applied to an engine manufacturing company and the integrated management plan is verified and its effectiveness confirmed. The effect of facility-wide method was a reduction of QA manpower and an improvement in maintaining quality assurance and stability through management of the workforce and contract grouping method.