• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.443-444
• /
• 2011

This paper discusses a model order reduction for large order rotor dynamics systems results from the finite element discretization. Typical rotor systems consist of a rotor, built-on parts, and a support system, and require prudent consideration in their dynamic analysis models because they include unsymmetric stiffness, localized nonproportional damping and frequency dependent gyroscopic effects. When the finite element model has a very large number of degrees of freedom because of complex geometry, repeated dynamic analyses to investigate the critical speeds, stability, and unbalanced response are computationally very expensive to finish within a practical design cycle. In this paper, the Krylov-based model order reduction via moment matching significantly speeds up the dynamic analyses necessary to check eigenvalues and critical speeds of a Nelson-Vaugh rotor system. With this approach the dynamic simulation is efficiently repeated via a reduced system by changing a running rotational speed because it can be preserved as a parameter in the process of model reduction. The Campbell diagram by the reduced system shows very good agreement with that of the original system. A 3-D finite element model of the Nelson-Vaugh rotor system is taken as a numerical example to demonstrate the advantages of this model reduction for rotor dynamic simulation.

• Proceedings of the KIEE Conference
• /
• 1984.07a
• /
• pp.84-85
• /
• 1984

The accurate description of many physical processes leads to high number of different equations which are very difficult to handle for simulation or control purposes. The reduction of high-order, linear, time-invariant systems to lower-order ones has been investigated by many researchers. In this paper, a model technique among these methods is used. This technique has been developed here as if it were extensions of Davison's original method (1), its modification having been made to provide, among other things, steady state agreement between the original large-scale and reduced-order model. The advantage of the modal analysis approach is that only matrix operations have to be executed. Here, it is very simple to obtain a reduced model. An example of illustration is shown using the model method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.684-690
• /
• 2006

This study proposes and validates a new column type electric power steering system (EPS-TT). It is driven by a uni-directional motor and two electro-magnetic clutches. The assist motor produces assist torque in only one direction and two clutches transmit the torque to the column of steering system in either left or right direction with respect to the steering input. A full order and a reduced order models are developed to evaluate the EPS-TT. Models are also used to investigate the vehicle responses. A PID control logic is designed to control the torque of the assist motor. A driver model is applied to the system and the resulting performances are analyzed. The results show that the performances of the full order model are similar to those of reduced order model. The results also prove that the performances achieved by the EPS-TT are improved compared to those of a conventional EPS-TT across the frequency domain.

• Structural Engineering and Mechanics
• /
• v.28 no.1
• /
• pp.107-127
• /
• 2008

Wind turbine blades are increasing in magnitude without a proportional increase of stiffness for which reason geometrical and inertial nonlinearities become increasingly important. Often these effects are analysed using a nonlinear truncated expansion in undamped fixed base mode shapes of a blade, modelling geometrical and inertial nonlinear couplings in the fundamental flap and edge direction. The purpose of this article is to examine the applicability of such a reduced-degree-of-freedom model in predicting the nonlinear response and stability of a blade by comparison to a full model based on a nonlinear co-rotating FE formulation. By use of the reduced-degree-of-freedom model it is shown that under strong resonance excitation of the fundamental flap or edge modes, significant energy is transferred to higher modes due to parametric or nonlinear coupling terms, which influence the response and stability conditions. It is demonstrated that the response predicted by such models in some cases becomes instable or chaotic. However, as a consequence of the energy flow the stability is increased and the tendency of chaotic vibrations is reduced as the number of modes are increased. The FE model representing the case of infinitely many included modes, is shown to predict stable and ordered response for all considered parameters. Further, the analysis shows that the reduced-degree-of-freedom model of relatively low order overestimates the response near resonance peaks, which is a consequence of the small number of included modes. The qualitative erratic response and stability prediction of the reduced order models take place at frequencies slightly above normal operation. However, for normal operation of the wind turbine without resonance excitation 4 modes in the reduced-degree-of-freedom model perform acceptable.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.453-463
• /
• 2017

This paper discusses the measurement of frequency response functions for various dc-dc converters. The frequency domain identification procedure is applied to the measured frequency responses. The identified transfer functions are primarily used in developing behavioral models for dc-dc converters. Distributed power systems are based upon such converters in cascade, parallel and several other configurations. The system level analysis of a complete system becomes complex when the identified transfer functions are of high order. Therefore, a certain technique needs to be applied for order reduction of the identified transfer functions. During the process of order reduction, it has to be ensured that the system retains the dynamics of the full order system. The technique used here is based on the Hankel singular values of a system. A systematic procedure is given to retain the maximum energy states for the reduced order model. A dynamic analysis is performed for behavioral models based on full and reduced order frequency responses. The close agreement of results validates the effectiveness of the model order reduction. Stability is the key design objective for any system designer. Therefore, the measured frequency responses at the interface of the source and load are also used to predict stability of the system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.933-941
• /
• 2014

This paper provides a comparison between the Krylov subspace method (KSM) and modal truncation method (MTM), which are typical projection-based model order reduction methods. The frequency responses are compared to determine the numerical accuracies and efficiencies. In order to compare the numerical accuracies of the KSM and MTM, the frequency responses and relative errors according to the order of the reduced model and frequency of interest are studied. Subsequently, a numerical examination shows whether a reduced order can be determined automatically with the help of an error convergence indicator. As for the numerical efficiency, the computation time needed to generate the projection matrix and the solution time to perform a frequency response analysis are compared according to the reduced order. A finite element model for a car suspension is considered as an application example of the numerical comparison.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.20-27
• /
• 1996

In this paper, we propose a coprime factor model reduction method to get a reduced order controller in $H^{\infty}$ mixed sensitivity problem with frequency weighting functions. for this purpose, the given $H^{\infty}$ mixed sensitivity problem is transformed into robust stabilization problem with coprime factor uncertainty of given plant. This method is to define frequency weighted coprime factors of plant in CSD (chain scattering description) form and reduce the coprime factors using weighted balanced truncation. then a controller is designed to the reduced order coprime factors using J-lossless coprime factorization method. Using this approach, the robust stability condition is derived and good performance is preserved in closed loop system with the given plant and the reduced order controller. Also the order of reduced controller for guaranteeing the robust stability can be determined before designing the reduced controller. The proposed method behaves well in both stable and unstable plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.313-316
• /
• 1997

Two different issues, design of reduced-order robust model predictive control and input signal design for identification of a MIMO system, are addressed and design techniques based on singular value decomposition(SVD) of the pulse response circulant matrix(PRCM) are proposed. For this, we investigate the properties of the PRCM, which is a periodic approximation of a linear discrete-time system, and show its SVD represents the directional as well as the frequency decomposition of the system. Usefulness of the PRCM and effectiveness of the proposed design techniques are demonstrated through numerical examples.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.251-260
• /
• 1999

The stiffness of joint parts in the finite element beam model are corrected by the direct comparison between the modal test and analysis model. The corrected stiffness are reviewed according to the boundary conditions of modal testing. For the improved modal test/analysis correction, more modes measured than acceleration sensors are used to make a minimal order system model. In addition, the initial F.E. model is reduced to the degrees of freedom of a minimal order system model, keeping the dynamics of the initial model. Finally, for the parametric correction of the reduced model, the submatrices are used to model the initially assumed stiffness.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.1036-1043
• /
• 1987

The objective of this paper is to improve the transient response characteristics of hydraulic servosystem via a reduced-order observer which is modelled based upon the nonlinear hydraulic servosystem. The observer is a second order linear model and implemented using a 8 bit micro-computer. The performance of the observer-based hydraulic servosystem was investigated through the hybrid computer simulations and experiments. The result shows that the reduced-order observer can effectively improve the transient response characteristics of hydraulic servosystem.