• 펄프종이기술
• /
• 제33권1호
• /
• pp.24-29
• /
• 2001

The base paper of corrugated board is mainly produced from Korean old corrugated container (KOCC), and thus the recycling rate of KOCC is very high. However, there is a problem that the pulp quality is very low while the recycling rate of OCC is high. The fines content in KOCC, the main source of the corrugated board, amounts to nearly the half of the total stock, and its formation increases as recycling process repeats due to the hornification of fiber. There have been attempts to improve the drainage property of OCC by increasing the headbox concentration of the paper machine or by applying drainage-promoting polymer additives. However, these conventional methods have problems of weakened paper strength and lowered converting fitness caused by paper formation hindrance. The strength of linerboard could not be increased in case KOCC is used, because hornified OCC pulp can-not be sufficiently refined due to the lowered drainage property caused by fines formation. We studied about a new technique consisting of froth-flotation for fractionating pulp stock into a long fiber portion and fines fraction. This study will be developed in order to enhance the drainage and strength properties of a recycled OCC pulp by selective treatment of flocculant on fractionated OCC Fines.

• 한국산업정보학회논문지
• /
• 제17권1호
• /
• pp.1-9
• /
• 2012

본 논문은 태양전지용 실리콘 잉곳 절삭시 발생하는 폐 슬러지에서 실리콘, 연마재를 분리 회수 재사용하는 시스템에 관한 것이다. 분리시스템의 기본 공정은 다중원심분리이고 분리 효율을 높이기 위해 초음파 교반, 알코올 물 가수, 가열처리를 하였다. 실리콘의 경우 2N의 경우 96% 회수율을 보였고, 4N의 경우 94%의 회수율을 보였다. 연마재인 SiC의 경우에는 약 80%의 회수율을 보였다. 4N의 고순도 Si 회수를 위해서는 진공열처리를 수행하여 잔류성분을 제거하였다.

• 문화기술의 융합
• /
• 제7권4호
• /
• pp.629-634
• /
• 2021

최근 일회용품의 사용 증가로 인한 환경 파괴를 방지하지 위해, 일회용품의 사용 축소와 더불어 재활용 비율을 최대한 높이는 노력이 절실하게 필요하다. 본 논문에서는 재활용 관련 정보 제공 및 올바른 분리배출을 지원하는 스마트폰용 애플리케이션 를 소개한다. 본 시스템은 효과적인 사물 인식 기법을 적용하여, 카메라를 배출할 물품에 비추면 즉시 해당 물품의 종류를 자동 인식 및 자동 분류하여 그 물품에 알맞은 분리배출 방법을 현장에서 즉시 제공한다는 점에서 기존의 분리배출 정보 애플리케이션에 비해 효과적이고 편리하다. 이 시스템이 널리 활용된다면, 일상 생활 속 재활용 비율 확대를 통한 환경보호에 기여할 수 있을 것으로 기대된다.

• 농촌계획
• /
• 제25권3호
• /
• pp.11-18
• /
• 2019

It is widely known that agricultural plastic waste incineration by farmers may cause big forest fire or fine dust in rural areas. Hence, how to increase the rate of collection and recycling of the agricultural plastic waste is of concern to policy makers especially for rural environment. The purpose of this study is to find the determinants of the collection rate of agricultural plastic waste. This study used the data from 'Research on Agricultural Waste' by the Korea Environment Corporation from year 2012 to 2015 for 163 regions. This study found that the compensation rate for collection, the frequency of collecting services, and the quality of waste are important to increase the collection rate. And the regions with more elderly and low income people are more likely to have higher collection rate. Finally, the chief producing regions that are specialized in a certain crop shows higher collection rate.

• 자원리싸이클링
• /
• 제9권2호
• /
• pp.3-10
• /
• 2000

알루미늄 폐캔은 중요한 재활용 자원으로서 알루미늄 캔용 원소재 판재는 물론 알루미늄의 국내소요량을 전량 수입에 의존하고 있는 우리나라로서는 활용 가능한 알루미늄폐캔의 재활용율을 높여야 하는 것은 외화절약과 환경보호 측면에서 대단히 중요하다. 사용한 알루미늄 캔을 다시 캔으로 재활용 하는 단계는 폐캔의 수집, 파쇄, 선별, 도료제거, 용해 및 2차지금을 제조하는 단계와 이 2차지금을 이용하여 열처리, 열간 및 냉간압연, 중간소둔처리 등을 거쳐 다시 캔을 성형하는 2단계로 나눌수 있다. 본 자료에서는 이러한 알루미늄 캔의 재활용 기술에 대한 우리나라와 선진국들의 현황과 전망을 소개하였다.

• 자원리싸이클링
• /
• 제12권1호
• /
• pp.65-74
• /
• 2003

As new functional electronics are being developed fast, the commercialization rate of advanced battery as a power source proceeds rapidly. Lithium battery is satisfying the needs of high-energy source for its lightness and good electrochemical property. Especially lithium ion battery, adopted as a new power source for portable electronic equipments around the globe, has been mass-produced. Under the circumstance, the generation of lithium battery wastes is becoming a new environmental problem. In this paper, we are going to inspect technology developments for recycling of lithium battery wastes and scraps in domestic and foreign area, and to suggest how to treat domestic lithium battery wastes and scraps better.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.19-23
• /
• 2001

In addition to landfilling and incineration, waste minimization and recycling have become priorities in Taiwan's municipal waste management strategies over the past 10 years. Major recycling initiatives being implemented in Taiwan include producer responsibility, "pay-as-you-throw, " and mandatory sorting provisions. Currently, the producer responsibility regime established under the Waste Disposal Act and administered by the Environmental Protection Administration (EPA) requires that manufacturers or importers of listed items, including containers, batteries. cars, motorcycles ("scooters"), tires, oil, televisions, refrigerators, air conditioners, washing machines, computers, and printers, pay recycling fees to government recycling funds. EPA then uses the recycling funds to subsidize collection and recycling. The 2001 recycling fund budget totals NT$57 billion (NT$35 = US$l). Under the producer responsibility regime, EPA-designated retailers ("sellers") must accept end-of-life items returned to them by the consumers. At the local level, Taipei City implements a pay-as-you-throw program, whereby citizens pay waste collection and treatment fees through the purchase of special trash bags approved by the Taipei City Government. However. recyclables that are separated by citizens are collected free-of-charge by the City. Taichung City and Kaohsiung City, on the other hand, enforce mandatory sorting schemes, whereby citizens face penalties if they don't separate recyclables from the trash before pick-up. These programs have resulted in a significant reduction in municipal waste. Per capita waste collected per day has dropped from 1.143 kg in 1997 to 0.978 kg in 2000. Targeting a 10% recycling rate for municipal waste in 2001. EPA plans to research and develop new recycling techniques, expand the scope of producer responsibilities, and strengthen existing municipal recyclable collection programs. To this end, among other initiatives, EPA has prepared a draft "Resource Recycling and Reuse Act" that would complement the existing producer responsibility programs by incorporating into the current recycling framework the concept of product life-cycle management.

• 한국건축시공학회지
• /
• 제20권5호
• /
• pp.391-397
• /
• 2020

본 연구는 콘크리트산업 부산물인 회수수의 안정적인 재활용과 경량골재 콘크리트의 활성화를 위한 연구의 일환으로 회수수를 인공경량골재의 프리웨팅수 및 배합수로 적용한 경량골재 모르타르의 특성을 비교·분석하였다. 연구결과 프리웨팅수 및 배합수내의 회수수 농도 5%인 RW5 배합의 압축강도가 약 45.2~53.9MPa 수준으로 모든 재령에서 가장 높은 압축강도를 발현하였다. 인장강도의 경우 회수수 농도에 관계없이 재령 28일에 약 3.4~3.8MPa를 발현하여 압축강도 값의 7~9% 수준으로 나타났으며, 건조수축의 경우 RW2.5배합에서 재령 56일에 약 0.107%로서 가장 낮은 수축률을 나타내었다. 또한 촉진중성화 시험 결과 RW5 배합에서 약 1.75mm로 다른 배합에 비해 낮은 촉진 중성화 깊이를 나타내어 본 연구 대상인 경량골재 모르타르의 경우 회수수 농도 5% 수준에서 우수한 압축강도특성과 중성화 저항성을 나타내었다.

• Archives of Pharmacal Research
• /
• 제27권8호
• /
• pp.873-877
• /
• 2004

This study was designed to determine the optimum conditions of three different factors (mixing time, mixing temperature, and tube size) in reduction of cholesterol in milk using immobilized $\beta$-CD beads. Immobilized $\beta$-CD glass beads were prepared at different conditions of silaniza-tion and $\beta$-CD immobilization reactions. In result, the glass beads (diameter 1 mm) at 20 mM 3-isocyanatopropyltriethoxysilane and 30 mM $\beta$-CD without base showed the highest choles-terol removal rate as 41%. Using above immobilized $\beta$-CD glass beads, the cholesterol removal rate was 40.2% with 6 h of mixing time in 7 mm diameter tube at $10^{\circ}C$. After choles-terol removal from milk, the glass beads were washed for cholesterol dissociation and reused. In recycling study, the cholesterol removal rate was 41%, which was mostly same as that using new glass beads. These results indicated that cholesterol removal rate was about 40% with $\beta$-CD immobilized glass beads, however, the recycling efficiency was almost 100%.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.69-76
• /
• 2018

PURPOSES : This study determined the optimal usage rate of RAP (reclaimed asphalt pavement) using cold central-plant recycling (CCPR) on a road-surface layer. In addition, a mixture-aggregate gradation design and a curing method based on the proposed rate for the surface-layer mix design were proposed. METHODS : First, current research trends were investigated by analyzing the optimum moisture content, mix design, and quality standards for surface layers in Korea and abroad. To analyze the aggregate characteristics of the RAP, its aggregate-size characteristics were analyzed through the combustion asphalt content test and the aggregate sieve analysis test. Moreover, aggregate-segregation experiments were performed to examine the possibility of RAP aggregate segregation from field compaction and vehicle traffic. After confirming the RAP quality standards, coarse aggregate and fine aggregate, aggregate-gradation design and quality tests were conducted for mixtures with 40% and 50% RAP usage. The optimum moisture content of the surface-layer mixture containing RAP was tested, as was the evapotranspiration effect on the surface-layer mixture of the optimum moisture content. RESULTS : After analyzing the RAP recycled aggregate size and extraction aggregate size, 13-8mm aggregate was found to be mostly 8mm aggregate after combustion. After using surface-chipping and mixing methods to examine the possibility of RAP aggregate segregation, it was found that the mixing method contributed very little for 3.32%, and because the surface-chipping method applied compaction energy directly as the maximum assumption the separation ratio was 15.46%. However, the composite aggregate gradation did not change. Using a 40% RAP aggregate rate on the surface-layer mixture for cold central-plant recycling satisfied the Abroad quality standard. The optimum moisture content of the surface-layer mixture was found to be 7.9% using the modified Marshall compaction test. It was found that the mixture was over 90% cured after curing at $60^{\circ}C$ for two days. CONCLUSIONS : To use the cold central-plant recycling mixture on a road-surface layer, a mixture-aggregate gradation design was proposed as the RAP recycled aggregate size without considering aggregate segregation, and the RAP optimal usage rate was 40%. In addition, the modified Marshall compaction test was used to determine the optimum moisture content as a mix-design parameter, and the curing method was adapted using the method recommended by Asphalt Recycling & Reclaiming Association (ARRA).