Browse > Article
http://dx.doi.org/10.5345/JKIBC.2020.20.5.391

A Study on the Strength, Drying Shrinkage and Carbonation Properties of Lightweight Aggregate Mortar with Recycling Water  

Oh, Tae-Gue (Department of Architectural Engineering, Wonkwang University)
Kim, Ji-Hwan (Department of Architectural Engineering, Wonkwang University)
Bae, Sung-Ho (Department of Architectural Engineering, Wonkwang University)
Choi, Se-Jin (Department of Architectural Engineering, Wonkwang University)
Publication Information
Journal of the Korea Institute of Building Construction / v.20, no.5, 2020 , pp. 391-397 More about this Journal
Abstract
This study is to compare and analyze the strength, drying shrinkage and carbonation properties of lightweight aggregate mortar using recycling water as prewetting water and mixing water. The flow, compressive strength, split tensile strength, drying shrinkage and carbonation depth of lightweight aggregate mortar with recycling water were measured. As test results, the mortar flow was similar in all mixes regardless of the recycling water content. The compresseive strength of the RW5 mix with 5% recycling water as prewetting water and mixing water was the highest value, about 53.9 MPa after 28 days. In addition, the tensile strength of lightweight mortar was about 3.4 to 3.8 MPa, indicating 7 to 9% of the compressive strength value regardless of recycling water content. In the case of drying shrinkage, the RW2.5 mix using 2.5% recycling water showed the lowest shrinkage rate as about 0.107% at 56 days. The drying shrinkage of the plain mix without recycling water was relatively higher than the RW2.5 and RW5 mix. The RW5 mix showed lowest carbonation depth compared to other mixes. In this study, the RW5 lightweight aggregate mortar with 5% recycling water exhibits excellent compressive strength and carbonation resistance. Therefore, it is considered that if the recycling water, a by-product of the concrete industry, is properly used as prewetting water and mixing water of lightweight mortar and concrete, it will be possible to increase the recycling rate of the by-product and contribute to improve the property of lightweitht aggregate mortar and concrete.
Keywords
recycling water; lightweight aggregate; mortar; compressive strength; drying shrinkage; carbonation depth;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Kim YC. A study on properties of blast-furnace slg many substitutions concrete in accordance with the amount of recycling water [master's thesis]. [Seoul (Korea)]: Konkuk University; 2015. 54 p.
2 Sin JK. Development of artificial lightweight aggregates using industrial by-products and its application to lightweight aggregates concrete [master's thesis]. [Cheongju (Korea)]: Cheong ju University. 2013. 228 p.
3 Lee HJ. An experimental study on the alkali-activated slag cement using recycling water of ready mixed concrete [master's thesis]. [Seoul (Korea)]: Hanyang University. 2011. 56 p.
4 Choi SJ, Kim DB, Lee KS, Kim YU. The study on the physical and strength properties of lightweight concrete by replacement ratio of artificial lightweight aggregate. Journal of The Korea Institute of Building Construction. 2019 Aug;19(4):313-22. https://doi.org/10.5345/JKIBC.2019.19.4.313   DOI
5 KS 4009 Ready-Mixed Concrete. Korea Industrial Standards, Seoul (Korea): Korean Standards & Certification Information Center; 2016. 18 p.
6 Kang SG. Effect of shell structure of artificial lightweight aggregates on the emission rate of absorbed water. Journal of The Korean Ceramic Society. 2008 Nov;45(11):750-4. https://doi.org/10.4191/KCERS.2008.45.1.750   DOI
7 Kwon KS, Ryu DW. Evaluation of strength properties of mortar by main material as sludge solids of ready mixed concrete recycling water. Proceedings of the Architectural Institute of Korea. 2013 Apr 27; Incheon, Korea. Seuol (Korea): Architectural Institute of Korea; 2013. p. 475-6.
8 Kim GH, Kim KJ, Lee MH, Lee SH, Han CG. Properties of cement mortar with solid content and leaving time of recycling water using stabilizing agent. Proceedings of the Architectural Institute of Korea. 2013 Oct 25; Cheonan, Korea. Seuol (Korea): Architectural Institute of Korea; 2013. p. 355-8.
9 Kim KL. A study on optimal applicability of ready mixedconcrete sludge water as batching water [master's thesis]. [Gangneung (Korea)]: Gangneung-Wonju National University. 2007. 95 p.
10 Lee KS, Oh TG, Jeong SB, Kim JH, Kim YU, Choi SJ. The strength properties of artificial lightweight aggregate mortar and pre-wetting with recycling water. proceedings of Korea Concrete Institute. 2019 May 8-10; Jeju, Korea. Seuol (Korea): Korea Concrete Institute; 2019. p. 407-8.
11 KS F 2529. Standard test method for density and water absorption of lightweight fine aggregates for structural concrete. Korea Industrial Standards, Seoul (Korea): Korean Standards & Certification Information Center; 2017. 7 p.
12 KS F 2502. Standard test method for sieve analysis of fine and coarse aggregates. Korea Industrial Standards, Seoul(Korea): Korean Standards & Certification Information Center; 2014. 4 p.
13 KS L 5105. Testing method for compressive strength of hydraulic cement mortars. Korea Industrial Standards, Seoul (Korea): Korean Standards & Certification Information Center; 2007. 5 p.
14 Park. YS, Park. JM, Lee. SH, Lee, MH. An experimental study on the properties of concrete using stabilizing agent treated recycling water. Journal of Archithectural Institite Of Korea. 2004 Apr;24(1):279-82.
15 KS F 2423. Standards test method for tensile splitting strength of concrete. Korea Industrial Standards. Seoul (Korea): Korean Standards & F 2423. Standards & Certification Information Center; 2016. 12 p.
16 KS F 2424. Standard test method for length change of mortar and concrete. Korea Industrial Standards, Seoul (Korea): Korean Standards & Certification Information Center; 2015.
17 KS F 2584. Standard test method for accelerated carbonation of concrete. Korea Industrial Standards, Seoul (Korea): Korean Standards & Certification Information Center; 2015.
18 Lim BR. A study on the strength of lightweight concrete with artificial aggregate [master's thesis]. [Suwon (Korea)]: Kyonggi University. 2002. 51 p.
19 Moon HY, Shin HC. Utilization of ready mixed concrete sludge for improving the strength of concrete with GGBF slag. Journal of The Korean Society of Civil Engineers. 2002 Mar;22(2A):315-26.
20 Han CG. Control of Quality and Equipment of Re-Mi-Con using Recycling Water. Seoul (Korea): Korea Concrete Institute; 2002. p. 40-8.