• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.74-77
• /
• 1988

This paper reports the properties of antireflection structure and hole formation of Te-based systems. The optical-recording characteristics of metallic recording media are enhanced significantly by incorporating the metal(Al) layer into an antreflection trilayer structure. Due to the interface condition inherent in the design of the trilayer structure, reflectivity from holes is ranked low fraction (<10%). The hole formation is carried by $Ar^+$ Laser(488nm). For 20nsec pulse duration, hole opening power(threschold) of $(Te_{86}Se_{14})_{50}Bi_{50}$ trilayer is lower than that of monolayer that used in this experiment. Hole shapes of the whole sample were clean.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.15-18
• /
• 1990

In this paper, perpendicular magnetic recording system which consists of a single pole head and a double, layer medium is analyzed by using 2D-finite element simulation and Preisach model for describing hysteresis characteristics. For confirming this method, we compare the calculated magnetic field intensity which is above the isolated transition of magnetization and scale up experimental data which have already published. The results show a good agreement and we can conclude that this method is very useful to analyze perpendicular magnetic recording system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.9
• /
• pp.423-430
• /
• 2002

The fabrication and experimentation of multi-channel electrodes which enable detecting and recording of multi-site neuronal signals have been investigated. A multi-channel electrode array was fabricated by depositing 2000${\AA}$ thick Au layer on the 1000${\AA}$ thick Ti adhesion layer on a glass wafer. The metal paths were patterned by wet etching and passivated by depositing a PECVD silicon nitride insulation layer to prevent signals from intermixing or cross-talking. After placing a thin slice of rat cerebellar granule cell in the culture ring located in central portion of the multi-channel electrode plate, a neuronal signal from an electrode which is in contact with the cerebellar granule cell has been detected. It was found that the electrode impedance ranges 200㏀∼1㏁ and the impedance is not changed by cleaning with nitric acid. Also, the impedance is inversely proportion to the exposed electrode area and the cross-talk is negligible when the electrode spacing is bigger than 600$\mu\textrm{m}$. The amplitude and frequency of the measured action potential were 38㎷ and 2㎑, which are typical values. From the experimental results, the fabricated multi-channel electrode array proved to be suitable for multi-site neuronal signal detection for the analysis of a complicated cell network.

• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.13-18
• /
• 2008

Scratches are observed on a polymer cover-layer of near-field recording (NFR) media after a servo test with rotating disc. The scratches are formed by the collision of a solid immersion lens (SIL)-media. One of the possible ways to avoid the scratch problem is to coat a dielectric protective film on the polymer cover-layer which enhances the hardness of the surface. The surface with hard characteristics in the surface reduces the scratch problem in the cover-layer. Not only the mechanical properties but also the optical properties should be controlled. Specifically, the refractive index of the dielectric protective film should be matched with the polymer cover-layer not to lose light at the interface due to the difference of the refractive index. The refractive index of the dielectric film can be tailored by controlling process parameters during sputtering and matched with that of the polymer cover-layer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.984-985
• /
• 2014

This research investigates to analyze the effect of laser of thermally assisted magnetic recording system on diamond like carbon (DLC) layer of slider. We investigated a damaged DLC layer of slider with laser spot-induced damage and analyze the effect of the damaged DLC layer in slider dynamics. The damaged DLC layer resulted in change of flying height and air bearing stiffness pressure.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.121-121
• /
• 2003

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.72-73
• /
• 2005

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.226-227
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.222-223
• /
• 2003

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.85-85
• /
• 1999