• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.444-448
• /
• 2005

This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.269-277
• /
• 1996

This paper has been presented a design of a POCSAG decoder in RT-level VHDL and implemented in a FPGA chip, and tested. In a single clock of 76.8KHz, the decoder receives all the data of the rate of 512/1200/2400bps and has maximum 2-own frames for service enhancement. To improve decoder performance, the decoder uses a preamble detection cosidering 9% frequency tolerance, a SCW detction and a ICW detection at each 4 bit. The decoder also corrects a address data and a message data up to 2 bits and proposes the PF (preamble frequency) error for saving battery. The decoder increases a battery life owing to turn off RF circuits when the preamble signal is detected with nises. The chip has been designed in RT-level VHdL, synthesized into logic gates using power view$^{TM}$ of viewlogic software. The chip has been implemented in an ALTERA EPF81188GC232-3 FPGA chip with 98% usability, and fully tested in shield room and field room. The chip has been proved that the wrong detection numbers of preamble of noises are significantly reduced in the pager system using PDI 2400 through the real field test. The receiving performance is improved by 20% of aaverage, compared with other existing systems.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.229-234
• /
• 2013

The purpose of this study is to develop a lighting apparatus of the illuminance and color temperature to maximize the ability of the optimal combination of light sources that can be controlled efficiently control device. Finding people comfortable feeling for indoor lighting that can be used in a variety of color temperature illumination area by combining light sensitivity can be realized. Lighting apparatus for fluorescent lamps with different color temperature of 2000K and 8000K, and by varying the quantity of each of the fluorescent lamps, the illuminance of lighting equipment and color temperature through optical simulations were evaluated. By infrared remote control receiver, divided into 5 types of relaxation, conversation, meeting, hospitality, arts and the lighting environment you want to transfer the PC0 ~ PC4 through the parallel port on the mode selected by the user at the receiving end the DC voltage output. EEFL inverter input DC voltage and the DC input voltage, depending on the level of EEFL dimming value (illuminance and color temperature) lighting environment you want to create change while using a PIR sensor EEFL automatically turn off if people do not have was developed so that the power consumption so you can save.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1345-1352
• /
• 2014

Bus architecture of SoC has been replaced by NoC in recent years. Noc uses the multi-clock domains to transmit and receive data between neighbor network interfaces and they have same frequency, but a phase difference because of clock skew. So a synchronizer is used for a mesochronous frequency in interconnection between network interfaces. In this paper the metastability is defined and analyzed in a D latch and a D flip-flop to search the possibilities that data can be lost in the process of sending and receiving data between interconnects when a local frequency and a transmitted frequency have a phase difference. 180nm CMOS model parameter and 1GHz are used to simulate them in HSpice. The simulation results show that the metastability happens in a latch and a flip-flop when input data change near the clock edges and there are intermediate states for a longer time as input data change closer at the clock edge. And the next stage can lose input data depending on environmental conditions such as temperature, processing variations, power supply, etc. The simulation results are very useful to design a mescochronous synchronizer for NoC.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.32.3-32.3
• /
• 2016

Available VLBI sources at high frequencies (e.g. >22GHz) are very limited - mainly due to atmospheric fluctuations that degrade coherence time and a power-law energy distribution of particles in case of AGNs. However, simultaneous multi-frequency VLBI receiving system of the Korean VLBI Network (KVN) and its powerful VLBI phase calibration technique offer benefits in finding more weak sources at millimeter wavelengths. Based on this aspect, multi-frequency AGN survey with the KVN (MASK) project, which aims to densify an existing a VLBI catalog of extragalactic radio sources at 22/43/86/129GHz is proposed as a KVN legacy program. We selected 1220 sources of AGNs that include known VLBI sources and new fringe-detected sources using the KVN at K-band (22GHz). Among them, 138 sources were observed as pilot experiments at 22/43/86/129GHz simultaneously and excellent VLBI detection results are achieved. Therefore, we expect that MASK will open a new era in VLBI science at millimeter wavelengths by providing unprecedented number of available sources in the Universe.

• Journal of Korean Academy of Nursing
• /
• v.47 no.4
• /
• pp.445-455
• /
• 2017

Purpose: This study was conducted to develop an Empowerment Education Program (EEP) for kidney transplant patients and to test the program's effects on uncertainty, self-care ability, and compliance. Methods: The research was conducted using a nonequivalent control group with a pretest-posttest design. The participants were 53 outpatients (experimental group: 25, control group: 28) who were receiving hospital treatment after kidney transplants. After the pre-test, patients in the experimental group underwent a weekly EEP for six weeks. The post-test was conducted immediately after, and four weeks after the program's completion in the same manner as the pre-test. For the control group, we conducted a post-test six and ten weeks after the pre-test, without and program intervention. A repeated measure ANOVA was performed to compare the change scores on main outcomes. Results: Uncertainty was significantly lower in the experimental group than in the control group, both immediately after (t=-3.84, p=<.001) and 4 weeks after (t=-4.51 p=<.001) the program, whereas self-care ability (t=5.81, p=<.001), (t=5.84, p=<.001) and compliance (t=5.07, p=<.001), (t=5.45, p=<.001) were significantly higher. Conclusion: Kidney transplant patients who underwent an EEP showed a decrease in uncertainty and an improvement in self-care ability and compliance. Thus, our findings confirmed that an EEP can be an independent intervention method for improving and maintaining the health of kidney transplant patients.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.1-6
• /
• 2011

LED(Light Emitting Diode) components have advantages of longer lifetime, lower power consumption and easy-to-control, compare to normal lamp and fluorescent light, according to the development of recent technologies. Thus, lots of illuminations which utilize LED components could be used. Recently, Visible Light Communication(VLC) which is a part of communication technologies, utilizing high speed response characteristic of LED components, started receiving public attention. In case of VLC, there is no need of frequency allocation due to no use of radio, but also no interference exists during data transmission, much different in ISM((Industrial Scientific Medical band). This is the reason why a lot of research results about VLC are becoming issued. In this paper, a survey of feasibility for using VLC utilizing an original LED illumination for underwater applications has been done and a primitive possibility of its application has been examined.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1150-1156
• /
• 2007

In this paper, two novel subsurface antennas for remote management of underground facilities using PCS and cellular wireless network are proposed. The proposed subsurface antenna is a dual band circular patch which is inserted and molded for the protection of the antenna into a metal such as a manhole cover. The antenna is designed considering the resonant frequency shift of the antenna due to the insertion and molding. The measured return loss and receiving power of the fabricated antenna comparison with a dipole shows that two proposed subsurface antenna can be used for remote management of underground facilities using PCS and cellular systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1214-1219
• /
• 2010

In this paper, a software radio system, supporting the physical layer of IEEE 802.15.4 standard, has been developed using USRP(Universal Software Radio Peripheral) board and GNU Radio package of an open source development kit for software radio. The software radio system supports the standards of BPSK and OQPSK modulations for 868/915 MHz band and OQPSK modulation for 2.45 GHz band. To verify the operation of the developed system, it has been tested under the standard signals according to the frequency band and packet structures for the transmitting and receiving operation. At 2.4 GHz, the Smart RF EV board and CC2430 modules are used to check the proper operation of the software radio system. The system performance test shows that the emission power spectrum, the eye-pattern, and PER(Packet Error Rate) meet the standard. It has been confirmed that the developed system supports the PHY layer of IEEE 802.15.4.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.123-132
• /
• 2011

Recently, DVC (Distributed Video Coding) is receiving a lot of attention as one of the low complexity video encoding techniques suitable for various applications with computation-limited and/or power-limited environment, and is being actively studied for improving the coding efficiency. This paper proposes a rate-distortion based selective block encoding scheme. First, the motion information is obtained in the process of generating side information at decoder and received through the feedback channel, and then, based on this information, the proposed method performs a selective block encoding based on rate-distortion optimization. Experimental results show that the performance of the proposed scheme reaches up to 2.2 dB PSNR gain over the existing scheme. Moreover, it is shown that the complexity can be reduced by encoding parts of region considering rate-distortion cost.