• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.150-155
• /
• 2015

최근 전세계적인 액화천연가스(LNG) 수요의 증가로 인해 LNG 터미널의 건설이 크게 늘어나고 있으며 기존의 LNG 터미널도 저장시설을 확장하고 있는 추세이다. 이에 따라 LNG 터미널의 다수의 저장탱크가 존재할 때 LNG를 송출하게 될 탱크와 각 송출량을 선택하는 것은 전체 공정 운전에 중대한 영향을 미칠 수 있다. 본 연구에서는 전체 송출량이 정해져 있을 경우 레벨이 각기 다른 탱크들에 대해 발생하는 BOG 양을 최소화 할 수 있도록 각 탱크의 송출량을 최적화하는 연구를 수행하였다. 저장 탱크의 특성과 구조에 맞게 벽면과 바닥면에서 유입되는 열과 탱크 재질의 열전도도를 고려한 동적모델을 구성하였고, 레벨을 변화시켜 각 레벨에 따른 BOG 양을 계산하여 얻은 BOG 발생량을 탱크 레벨에 따라 지수함수로 회귀분석하였다. 이를 통해 탱크의 특성과 레벨에 따라 BOG 발생량을 예측할 수 있는 BOR(Boil-off Rate) 모델을 얻을 수 있었다. 개발한 BOR 모델을 이용하여 BOG 발생량을 최소화하는 목적함수를 설정하고 요구되는 송출량, 탱크내 레벨 제한, 탱크 당 가능한 송출량을 제한조건으로 설정하여 각 탱크의 최적 송출량을 결정하는 운전 최적화를 수행하였다. 이를 실제 운전되고 있는 인천 LNG 터미널의 18개 저장탱크에 적용하여 다양한 레벨이 분포되어 있고 총 송출량이 80,000 m3/day(최대 송출량)이 요구되는 시나리오에 대해 최적화를 수행하여 가정한 기존의 운전방법과 비교하였을 때 BOG 양을 약 9% 감소시킬 수 있었다.

• 지역사회간호학회지
• /
• 제11권2호
• /
• pp.399-410
• /
• 2000

In this, analyzing the type of subjectivity in which people would have about home visit nursing services originating from public health care centers. I tried to research more effective ways to improve home visit nursing care services. and later. for the development of home visit nursing care. to supply basic data. The method for this study was the Q-method. created by William Stephenson. and was adequate for the study of subjectivity. For this study. through the deep interview. literature inquiry, and the discussion course. 206 Q-statement sentences were abstracted. and based on them, after Q-sample-selection. I then collected the Q-categorized-result from 32 subjects from Mar. 10. 2000 to Mar. 25. 2000. Through the statistic a analysis of PC-Qunal program. the subjectivity species were categorized and analyzed. The study results show that there are 3 sorts of recognition types. and they are analyzed in the following; The first type: the positively receiving type shows that they feel thankful and a trusting feeling about home visit nursing. The second type: the negatively mistrusting type shows that they had doubtful attitudes about the specialty of home visit nursing: they wanted medicine or nutrition remedies rather than health education and concerning the their own health care, they prefered the hospitals or clinics. The third type: the conditional receiving type shows that even though they had a positive receiving attitude about home visit nursing wanting to consult with the home visit nurses about the difficult problem which could not easily be settled, hoping that the home visit nurses could visit them more often, in their actual lives. they strongly indicated their attitudes concerning money as more important than home visits. The subjects in these 3 types commonly had a good feeling about the kindness of the home visit nurses: the first and third types also had a positive recognition about home visit nursing; however. in aspects of the evaluation and receiving attitudes, they showed a big difference. When all the above results are integrated. in the case of the first type the home visit nursing service, which satisfied the demand for health care of the medically weak people. should be continuously supplied. Additionally in case of the second type (negatively mistrust). continuous education and support should be supplied with enough interest to lead their concerns about their own health care as well as lead medical spending in a productive and effective direction in order to change their impressions. Through this study. I learned that the recognition of the objectives of home visit nursing services can be categorized in to 3 types and could be analyzed. Thus I wish that this study helps to present basic data which contributes to the development of the home visit nursing field.

• 한국음향학회지
• /
• 제25권2호
• /
• pp.49-55
• /
• 2006

현행 중량 바닥충격음 표준 측정방식인 KS F 2810-2에 의하면 중앙점을 포함한 3-5곳의 타격위치에 대하여 수음실에서 4곳 이상의 지점의 피크레벨을 측정하도록 되어있다. 그러나 이 표준 방식에 의한 동일 상황에서의 측정 결과가 측정기관, 측정횟수, 측정점의 위치 등에 따라 일관성을 보이지 못하고 있음이 종종 발견된다. 이러한 편차는 반복성이나 재현성의 측면에서 측정값의 신뢰도에 영향을 미칠 수 있는 수준으로 우려된다. 측정결과 실험실의 경우 중앙 타격시 63Hz 대역에서 각 지점간의 차이가 l0dB이상 차이를 보였으며, 전체적으로 중간주파수 대역에서 보다 저주파수 대역에서의 편차가 크게 발생하는 것으로 나타났다. 이러한 편차는 저주파수 대역에서의 모드 중첩현상에 의한 것으로 보인다. 현행 바닥충격음 단일지수 평가 방법에 따라 평가한 결과 측정위치에 따라 단일지수 평가값에 2-7dB의 차이를 보였으며 바닥충격음 차음성능 평가에 영향을 줄 수 있을 것으로 판단되었다. 따라서 향후 저주파 대역의 편차를 줄이거나 저음의 모드 중첩에 의한 영향을 배제할 수 있는 측정 혹은 평가 방식의 개선이 필요하다고 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권12호
• /
• pp.1717-1725
• /
• 2013

The objectives of this study were to compare visual observation and an electronic grazing time method and to evaluate the effects of nutritional plans on intake, grazing behavior and horizontal and vertical locomotion of young bulls in a tropical pasture. Thirty-nine Nellore young bulls with an average body weight of $345{\pm}9.3$ kg kept in pasture were used. The experimental treatments consisted of: restricted: animals kept in a plot with a low mass of forage receiving mineral mixture only; control: animals receiving mineral mixture only; HPHC: a high protein and high carbohydrate supplement; HPLC: a high protein and low carbohydrate supplement; LPHC: a low protein and high carbohydrate supplement; LPLC: a low protein and low carbohydrate supplement. GPS collars equipped with activity sensors were used. Information about head position, latitude, longitude and altitude were recorded. Daytime grazing behavioral patterns monitored by a continuous focal animal recording method was compared to behavior estimated by the activity sensor. Feed intake was estimated by a marker method. The Restricted group presented lower (p<0.05) intake of dry matter and TDN. However, difference in dry matter intake was not found (p>0.05) between non-supplemented and supplemented animals. Difference was not found (p>0.05) in daytime grazing time obtained by visual observation or the activity sensor method. The restricted group showed longer (p<0.05) grazing time (9.58 h/d) than other groups, but difference was not found (p>0.05) in the grazing time between Control (8.35 h/d) and supplemented animals (8.03 h/d). The Restricted group presented lower (p<0.05) horizontal locomotion distance (2,168 m/d) in comparison to other groups (2,580.6 m/d). It can be concluded that the use of activity sensor methods can be recommended due to their being similar to visual observation and able to record 24-h/d. While supplements with high carbohydrates reduce pasture intake, they do not change grazing behavior. Moderate supplementation (until 50% of protein requirement and 30% of energy requirement) of beef cattle on tropical pasture has no effect on daily locomotion.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제22권2호
• /
• pp.129-143
• /
• 2022

Background: Patient-controlled analgesia (PCA) has been widely used as an effective medical treatment for pain and for postoperative analgesia. However, improper dose errors in intravenous (IV) administration of narcotic analgesics from a PCA infusion pump can cause patient harm. Furthermore, opioid overdose is considered one of the highest risk factors for patients receiving pain medications. Therefore, accurate delivery of opioid analgesics is a critical function of PCA infusion pumps. Methods: We designed a microbalance method that consisted of a closed acrylic chamber containing a layer and an oil layer with an electronic balance. A commercially available infusion analyzer (IDA-5, Fluke Co., Everett, WA, USA) was used to measure the accuracy of the infusion flow rate from a commercially available smart PCA infusion pump (PS-1000, UNIMEDICS, Co., Ltd., Seoul, Korea) and compared with the results of the microbalance method. We evaluated the uncertainty of the flow rate measurement using the ISO guide (GUM:1995 part3). The battery life, delay time of the occlusion alarm, and bolus function of the PCA pump were also tested. Results: The microbalance method was good in the short-term 2 h measurement, and IDA-5 was good in the long-term 24 h measurement. The two measurement systems can complement each other in the case of the measurement time. Regarding battery performance, PS-1000 lasted approximately 5 days in a 1 ml/hr flow rate condition without recharging the battery. The occlusion pressure alarm delays of PS-1000 satisfied the conventional alarm threshold of occlusion pressure (300-800 mmHg). Average accuracy bolus volume was measured as 63%, 95%, and 98.5% with 0.1 ml, 1 ml, and 2 ml bolus volume presets, respectively. A 1 ml/hr flow rate measurement was evaluated as 2.08% of expanded uncertainty, with a 95% confidence level. Conclusion: PS-1000 showed a flow accuracy to be within the infusion pump standard, which is ± 5% of flow accuracy. Occlusion alarm of PS-1000 was quickly transmitted, resulting in better safety for patients receiving IV infusion of opioids. PS-1000 is sufficient for a portable smart PCA infusion pump.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.600-605
• /
• 2000

The aim of this study is to compare the sound insulation performances of window depending on the measurement methods through the field test and analyze the factors that affect the sound insulation performances. Four measurement methods which are specified in the Koran Standard 2235 and the International Standard 140-5 were selected for the study; the outdoor sound source method which is classified the l000mm method and the 10mm method, the indoor sound source method, and the ISO method. The result of this study is that the sound insulation performance of the windows was the best when measured according to the ISO method and the worst the indoor sound source method. Through the study it was found that the main factors affecting the sound insulation performance of the windows were the correction of the specimen's area and the equivalent sound absorption area of the receiving room.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.894-900
• /
• 1998

In this paper, a communication method is proposed for the development of a main engine remote control system. The main engine control system compriese three subsystems such as RCS (Remote Control System) BCS (Bridge Control System) and SS (Safety System), Thus it is required to exchange data each other among these subsystems. The communication method has simplified hardware through the minimization of communication components where the interrupt method are employed for receiving and the polling method for transmitting. We discuss a methodology of using a ring buffer for data storage physically which has two buffers virtually for the effective use of memory. This communication method presents a good performance in the system which has rather small numbers of communication data.

• 한국시뮬레이션학회논문지
• /
• 제13권2호
• /
• pp.1-12
• /
• 2004

This paper estimated the arrival angle and electric wave delay time using the space method law and the directions of arrival (DOA) estimation algorithm in case of signal correlation. Space method law is the method used to repress cross correlation before applying the weight value to the receiving signal. The values of the diagonal elements in the correlation matrix were averaged to replace as the diagonal elements value. In the area of wireless communication or mobile communication, there are high correlations in case of low delay time difference in multiple waves. This causes the quality of the communication to drop due to interference with the desired signal elements. This paper estimated the arrival angle and electric wave delay time using the space method law and the MUSIC algorithm. With the arrival angle algorithm, the arrival angle cannot be estimated below 5 in case of signal correlations because the angle resolution capacity decreases accordingly. The super resolution capacity was estimated to determine the arrival angle below 5 in this paper. In addition, the proposed algorithm estimated the short delay time difference to be below 20ns.

• Journal of information and communication convergence engineering
• /
• 제3권1호
• /
• pp.13-17
• /
• 2005

The link e daggregation between 10GbE switches requires an advanced framistribution method to be properly and efficiently applied. The fixed or dynamic frame distribution methods, formerly proposed, cannot fully utilize the aggregated links, where the receiving terminal only attaches to a pre-specified link among multiple physical links. A frame distribution method using padding is proposed for the link aggregation between 10GbE switches to solve this problem. We compared the performance of the proposed method with those of the static and dynamic frame distribution methods. As a result, the proposed method shows a better performance when the offered load is below 0.7 and the average length of the frames is longer than 954 bytes.

• 한국음향학회지
• /
• 제31권3호
• /
• pp.197-204
• /
• 2012

본 연구에서는 마이크로폰에 입사되는 음성 신호를 거리의 변동에 의해 크기와 주파수 응답특성 변화를 최소화시키는 방법에 대한 연구를 하였다. 우선 마이크로폰과 음성음원 사이의 거리를 변화시키며 거리변화에 따른 응답특성을 측정하였다. 본 연구에 사용된 마이크로폰은 일반적으로 사용되는 마이크로폰 중에 무지향성 마이크로폰과 초단일지향성 마이크로폰, 단일지향성 마이크로폰 등, 3가지 종류의 마이크로폰을 선정하였다. 측정한 이들 마이크의 주파수 응답특성 변화 결과를 기준치와 비교하여 보정치를 구하고 이를 주파수 대역별로 변화된 음성신호를 원음과 근사하게 보상하도록 하였다. 저주파대역은 근접효과에 의한 증폭현상, 그리고 거리에 의한 감쇠효과를 보정하도록 하였다. 중음대역에서는 저음대역보다 거리의 변화에 의한 주파수특성 편차가 비교적 적었지만 음성정보신호에 중요한 영향을 주는 부분이기 때문에 기준신호와 비교하여 복원하도록 하였다. 고주파대역의 음성정보의 변화는 극히 미소하여 고주파대역 조정은 큰 문제가 없이 원음에 가깝게 복원되었다.