• Smart Media Journal
• /
• v.5 no.4
• /
• pp.131-137
• /
• 2016

Since the phenomenon that the consumers slip important calls since they do not know the receiving information of the smart phone in spaces which smart phones can not be carried, the development of technology to solve this problem is urgent and the cases of burglary and losses of smart phones during hobby and recreation life are increasing and especially since burglary behaviors are occurring much in places such as bathing resort, swimming pool, Korean dry sauna, sauna and spa etc, the schemes to protect smart phones during hobbies and recreation life is needed. Since the smart watch, the conventional wearable device are high price machines and due to the burden about A/S costs for the damage or failure of the machine during exercise, hobbies and recreation activities, the burden about the use is high, development of products which can reduce such burden and emphasize the usefulness is urgent and in order to solve this problem, the added value and psychological repercussion effect will be very high in areas of smart phone users and utilizing them by developing the system which can know if the smart phone has received calls at least in places where smart phones can not be carried.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.78-84
• /
• 2005

A contactless recharging device for totally implantable middle ear systems has been designed as a pillow type that the user can recharge the implanted battery with taking a rest. The proposed device uses the electromagnetic coupling between the transmitting coil and the receiving coil. To supply sufficient power for the implanted circuits, each coil uses LC resonance and the implanted device uses voltage doubler. A power MOSFET is used for switching the DC voltage of LC parallel circuit and the switching frequency demands on a programmable frequency generator which is controlled by microcontroller. In order to improve the electromagnetic coupling efficiency at specific positions of coil which may vary with the displacement of head, the optimal location of receiving coil was studied, and the 5 transmitting coils in a pillow for recharging the implant module was designed. From such a recharging experiment, it was found that the proposed device could provide the sufficient operating voltage within the distance of 4 cm between pillow and the implanted device.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.97-103
• /
• 2019

In this paper, we designed and fabricated a receiving modem that can be applied to guided weapons can change real-time targets with little effect of fading. The designed modem consists of synchronous detector, timing error estimator, timing recovery, differential decoder and viterbi decoder, and it's implemented in FPGA so that it can be redesigned and modified according to requirements. The modem board was directly converted from IF frequency to baseband and converted into digital data through ADC. It is confirmed that it is applicable to the guided weapons that changing real-time targets through simulations, measurements and test.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.500-506
• /
• 1999

We designed and fabricated a bidirectional optical transceiver module for low cost access network. An integrated chip forming a pin-PD on an 1.3 urn FP-LD was assembled by flip-chip bonding on a Si optical bench, a single mode fiber with an angled end facet was aligned passively with the integrated chip on V-groove of Si-optical bench. Gaussian beam theory was applied to evaluate the coupling coefficients as a function of some parameters such as alignment distance, angle of fiber end facet, vertical alignment error. The theory is also used to search the bottle-neck between transmittance and receiving coupling efficiency in the bi-directional optical system. Tn this paper, we confirmed that reduction of coupling efficiency by the vertical alignment error between laser beam and fiber core axis can be compensated by controlling the fiber facet angle. In the fabrication of sub-module, a'||'&'||' we made such that the fiber facet have a corn shape with an angled facet only core part, the reflection of transmitted laser beam from the fiber facet could be minimized below -35 dE in alignment distance of 2: 30 /J.m. In the same condition, transmitted output power of -12.1 dEm and responsivity of 0.2. AIW were obtained.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.419-426
• /
• 2002

The conventional RTK-GPS technique has many problems which are permission using RF wireless modem, influence of geographic obstacle using radio wave, frequency interference, finiteness of frequency resources. To solve these problems, in this paper, we designed the DGPS correction message transmission system as a method to substitute the RF wireless modem of RTK-DGPS receiver. Then the interface module was designed and implemented for linkage of GPS receiver and mobile phone. As a result worked differential surveying using receiving correction message using RS-232C and communication control, users of mobile station were worked differential surveying correction between mobile phones. Interface module system was received the same result of precision which was compared RF wireless modem system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1254-1260
• /
• 2009

CDMA tele-Controller system is designed with a low power consumption 8 bit microcontroller, ATmega 2560. ATmega 2560 microcontroller consists of 4 UART (Universal asynchronous receiver/transmitter) ports, 4 kbytes EEPROM, 256 kbytes flash memory, 4 kbytes SRAM. 4 URAT is used for CDMA modem, communication for GPS module, EEPROM is used for saving a configuration for program running, a flash memory of 256 kbytes is used for storing a F/W(Firm Ware), and SRAM is used for stack, storing memory of global variables while program running. We have tested the communication distance between the coast station and sea by the fabricated control board using 800 MHz CDMA modem and GPS module, which is building for the navigational aid management system by remote control. As a results, the receiving signal strength is above -80 dBm, and then the characteristics of the control board implemented more than 10 km in the distance of the communication.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.35-43
• /
• 2017

In this paper, we propose indoor IoT monitoring system based on visible light communication using smart phone with attracting attentions in recent wireless communication. The main features and contributions of the proposed system developed in this paper are as follows. First, the actual data generated within indoor can be processed via the server by using only the visible light communication. Second, the collected data by using the visible light communication can be monitered by smart phone. Performance evaluation of the proposed system is performed under illumination of the normal fluorescent lamps. We first check successful transmission between transmitting module and receiving module of the data collection system. The monitoring system is tested according to the change of the degree of condensing and distance of the LED and the decoding success rate of the proposed smart phone application. We expect that the proposed system can be applied for indoor and outdoor IoT areas together.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2015

In this paper, we developed the hardware GPS signal generator for generating a satellite navigation signal synchronized with Live GPS signal signals and analyzed the performance of signal genterator thorough the experiment For a hardware implementation of the GPS navigation signal synchronous generator, the GPS module may receive a GPS signal in order to generate the same signal as the operation that is transmitted from the current GPS satellite and the synchronized time information and the GPS satellites using the Novatel Inc. OEMStar.In. For generating the GPS synchronization signal, the GPS navigation signal generator was adjusted to a reference clock using the GPS clock synchronous information provided by the GPS receiving module and GPS signals also generated in consideration of the delay of the internal hardware of the generator. In this paper, we analyzed the effect of the receiver via the signal switching between Live GPS signal and generates a signal to measure the performance of the GPS navigation synchronization signal generator. It was confirmed that by the seamless operation of the signal even the moment that the switching of the generated signal from Live GPS signal has occurred through experimentation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.1-12
• /
• 2003

DAB(Digital audio broadcasting) is a next generation radio broadcasting system which provides CD quality audio, various data services and superior reception ability when moving. Also, it can show traffic informations and news literally or graphically. In this paper, we design and fabricate the DAB tuner for ITS service that follows Eureka-147 and ETSI 300 401 specifications. This small-sized tuner can be adopted to mny electronic equipments such as a Hi-Fi audio, DVD player, car audio system etc.. The overall performance of the tuner depends on a phase noise of VCO and the sensitivity of the receiving system is influenced by LNA, image rejection filter and channel selection filter. All our measurement results satisfy the specification for a DAB system with the return loss of 9dB, the noise figure of 6dB for both Band 111 and L-band and the sensitivity of -97dBm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.11-12
• /
• 2012

In this paper, efficient visible light communication technology LED (Light Emitting Diode) lighting through the existing infrared sensor used for performance analysis of transmitting and receiving is possible. LED utilizes lighting by changing light into electricity. Lighting features while maintaining the basic principles of flashing LED and PD (Photo Diode) to send and receive communications from LED lighting communication convergence principle be realized simultaneously enabling. Multiple IT applications under the basic structure of LED technology development, and the current was encountered in real life. LED lighting anywhere with wireless communication technology that can, in order to ~ 1m above the initial value by taking advantage of the system H/W and infrared sensors(PD) are widely used in the entire system that can improve the speed of visible light data transmission system is finished. LED module that is used to communicate whether the performance analysis, For forecasting and communication distance on the LED and infrared sensor configuration of the implementation of the research is to study about the possibility of application methods and indicates.