• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.12
• /
• pp.635-640
• /
• 2016

It is important factors for a production system to get a profitable result in quality and reliability process. For this reason, there's are various type of research papers in a certain type of data acquisition and application to reliability and quality of the level of M2M devices. In general, a classification problem of slightly different signal such as sensing data is difficult to do with classical statistical methods. There's required real-time and instantaneous calculation properties in machine process. Especially a type of injection molding machine which has a property to be decided in accordance with short-term cycle process needs a solution that can be done a certain type of decision like as good or bad quality immediately. This paper presents a simple application of Kalman Filtering by single sensing data to injection molding process in order to get a correct answer from the real time sensing data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.187-196
• /
• 2017

The size of raw data has dramatically increased due to the recent trend of Synthetic Aperture Radar(SAR) development plans for high resolution and high definition image acquisition. The large raw data has an impact on satellite operability due to the limitations of storage and transmission capacity. To improve the SAR operability, the SAR raw data shall be compressed before transmission to the ground station. The Block Adaptive Quantization (BAQ) algorithm is one of the data compression algorithm and has been used for a long time in the spaceborne SAR system. In this paper, an optimization method of BAQ threshold table is introduced using real SAR raw data to prevent the degradation of signal quality caused by data compression. In this manner, a new variation estimation strategy and a new threshold method for block type decision are introduced.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.122-124
• /
• 2000

As the complexity of power systems increases, especially in the case of multiple faults or incorrect operation of protective devices, fault diagnosis requires new and systematic methods to the reasoning process, which improves both its accuracy and its efficiency. Therefore this paper proposes a method of the modeling of protection systems and fault diagnosis in power systems using Fuzzy Petri Nets (FPN). The proposed method can reduce processing time and increase accuracy when compared with the traditional methods. And also this method can cover online processing of real-time data from SCADA (Supervisory Control and Data Acquisition).

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1930-1936
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.285-290
• /
• 2020

This paper presents a time synchronization algorithm based on PLL for application to telemetry systems and implement FPGA logic. The large aircraft of the telemetry system acquires status information through each distributed acquisition devices and analyzes the flight status in real time. For this reason, time synchronization between systems is important to improve precision. This paper presents a PLL based time synchronization algorithm that is less complex than other time synchronization methods and takes less time to process data because there is minimized message transmission for synchronization. The validity of proposed algorithm is proved by simulation of Python. And the VHDL logic was implemented in FPGA to check the time synchronization performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2297-2311
• /
• 1994

This paper presents the study on the development of a DNC, system IPIS(Interactive Plant Information System)/DNC, which can manage NC machines and robots as a distributed control method in the machine. processing factory. The IPIS/DNC system is composed of a host computer, satellites and NC machines. A set of software modules are developed on the host computer and the satellites separately. By modularizing each functions of the IPIS/DNC system and using multi-taking method, the functions such as NC program management, NC program distribution, and shop monitoring can be performed on the host computer, and the functions such as NC program transfer to the NC machines, and NC program editing can be performed on the satellites. A Relational database which is linked with job scheduling system is used for IPIS/DNC system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.106-111
• /
• 2004

A data communication should be carried out by a SSB(Single Side Band) to collect real time position data of fishery ship automatically, and a study on the protocol for exchanging the information with GPS should be made. A research about regional and concentrated maritime information should be first made to obtain ship's voyage data and also, research of the Modem and transmitter-receiver controller for sending voice and data simultaneously through a SSB and of the acquisition of data through a GPS also should be carried out.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.347-354
• /
• 2007

This paper describes on the real-time monitoring of net setting and hauling process for fishing operations of Danish seine vessels in the southern waters of Korea as an application of a PC based ECDIS system. Tracking of fishing process was performed for the large scale Danish seine vessel of G/T 90 and 350 PS class using the fishing gear which the length of net, ground rope, head rope and sweep line including warp in both sides were 86m, 104m, 118m and 3,200m, respectively. Tracking information for net setting and hauling process was continuously recorded for 23 fishing operations performed on November and December, 2003. All measurement data, such as trawl position, heading, towing course and past track which was individually time stamped during data acquisition, was processed in real time on the ECDIS and displayed simultaneously on the ENC chart. The results indicated that after the separation of a marker buoy from Danish seiner, the averaged running speed of vessel and the averaged setting period while shooting the seine on the course of diamond shape to surround the fish school in the 23 fishing operations were 8.3 knots and 13.1 minutes, respectively. And with the maker buoy taken on board, the averaged running speed of vessel and the averaged towing period while closing the seine on the straight route was 1.0 knots and 47.0 minutes, respectively. After the closing stage of hand rope, the hand rope was towed by the averaged speed of 2.2 knots during the 13.0 minutes. The average area for route of diamond shape swept by sweep lines of the seine in 23 fishing grounds was $709,951.6m^2$. Further investigation is also planed to provide more quantitative tracking information and to achieve more effective surveillance and control of Danish seine vessels in EEZ fishing grounds.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.10-15
• /
• 2008

Flocculation phenomena of the stock mixed with cellulosic fibers, fillers and polymers were investigated by a new turbidity measurement system consisted of a probe-type turbidimeter, data acquisition system and computer. The probe-type turbidimeter allowed to measure the real time flocculation of the stock induced by single polymer and microparticle systems. Flocculation phenomena were evaluated by average and final relative turbidity indices. Turbidity and flocculation showed inverse relationship, i.e. the turbidity decreased with the formation of flocs. Relative turbidity of the stock treated with microparticle system was lower than that of the stock containing single polymer system, which indicated that the microparticle system showed greater floc forming efficiency than single polymer system.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3184-3186
• /
• 2000

This paper describes the remote monitoring & diagnosis system of tower parking facilities. This system consists of central station, monitoring equipments and parking system control panel. The central station is developed under client/server architecture, and the monitoring systems are connected to central station by LAN using RAS constructed PSTN. This system offers real-time fault detection and data acquisition of tower parking system.