• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.337-339
• /
• 2005

The demand for a real-time image surveillance system using network camera server is increasing as the network infra has been grown and digital video compression techniques have been developed. The image surveillance system using network camera server has several merits compared to existing real-time image surveillance system using CCTV. It would be more convenient if wireless realtime image transmission were possible. In this paper, a bluetooth module is designed and implemented for a real-time image surveillance system to send and receive informations wirelessly. It may simplify the system development procedures and increase the productivity by low power consumption, low cost, and simple wireless installation. A scatter-net formation is proposed using dynamic and distributed algorithm so that the network connection is reliable.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.491-494
• /
• 2002

The real-time industrial network often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices such as sensors, actuators, and controllers. numerous standard organizations and vendors have developed various fieldbus protocols such as Profibus, WorldFIP and Foundation Fieldbus. However, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. In order to solve these problems, the computer network technology, especially Ethernet (IEEE 802.3), is being adopted lo the industrial environment. The crucial technical obstacle for Ethernet is that its non-deterministic behavior makes it inadequate for industrial applications where real-time data such as control command and alarm signal hale to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial comm unications.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.90-98
• /
• 2003

The real-time industrial network, often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial communications. More specifically, this paper presents an analytical and experimental performance evaluation of the switched Ethernet and a case study about networked control system.

• 제어로봇시스템학회논문지
• /
• 제10권8호
• /
• pp.718-725
• /
• 2004

The real-time industrial network, often referred to as fieldbus, is an important element for intelligent manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet with cascade structure for industrial communications. More specifically, this paper presents an analytical performance evaluation of switched Ethernet with cascade structure, and a case study about networked control system.

• 로봇학회논문지
• /
• 제18권3호
• /
• pp.281-284
• /
• 2023

Real-time control communication network system is important for developing defense robots because it affects environmental interaction, performance, and safety. We propose a real-time control communication network using the Xenomai real-time operating system and the open-source EtherCAT master library, SOEM. EtherCAT is an Ethernet-based industrial communication method. It has low latency and many functions such as cable redundancy and distributed clock synchronization. We use Xenomai RTOS and Intel NUC to develop the system. Experimental tests demonstrate the Real-time EtherCAT master implementation, and communication with CiA301-based slave devices. The jitter measurement was conducted to validate the real-time performance of the system. The proposed system shows possibility for real-time robotics applications in various defense robots.

• 한국정보처리학회논문지
• /
• 제6권2호
• /
• pp.449-458
• /
• 1999

실시간 시스템에서 정확한 응답 시간과 통신상의 지연이 최소화 될 것이 요구된다. 그러나, 현재의 SNMP 프로토콜은 주기적인 자료 요청을 하는데 많은 통신량을 유발하며, 네트워크 자원을 비효율적으로 사용한다. 본 논문은 현재 사용중인 SNMP에 시간적 제약 조건을 수용할 수 있도록 확장한 실시간 SNMP의 구현에 대한 논문이다. 실시간 SNMP는 기존에 사용하던 SNMP가 주기적 요구 (periodic request)를 수행할 때 발생하는 통신상의 비효율성을 개선하였다. 이를 위해서는, 기존의 SNMP의 서버/클라이언트 방식의 기법에 변화를 주지 않고, 관리국 (Management station)이 Real-Time SNMP PDU를 에이전트에게 전송하며, 실시간 SNMP 에이전트 측에서 관리국에서 요청한 MIB에 대한 정보를 주기적으로 관리국으로 정보를 제공할 수 있게 하였다. 이러한 설계를 바탕으로 관리국과 에이전트 사이의 요구에 대한 정확한 응답 시간(response time)을 제공할 수 있게 하여, 네트워크 관리의 효율을 높일 수 있는 방법을 본 논문에서는 제시하고, 실제 구현 환경에서의 실험을 통하여 성능이 개선됨을 보였다.

• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.40-46
• /
• 2009

Recently CAN (Controller Area Network) is widely used as an in-vehicle networking protocol for intelligent vehicle. The identifier field (ID) of CAN is used not only to differentiate the messages but also to give different priorities to access the bus. This paper presents a dynamic 10 allocation algorithm in order to enhance the real-time quality-of-service (QoS) performance. When the network traffic is increased, this algorithm can allocate a network resource to lower priority message without degradation of the real-time QoS performance of higher priority message. In order to demonstrate the algorithm's feasibility, message transmission delays have been measured with and without the algorithm on an experimental network test bed.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.770-780
• /
• 2022

In 1993 the University of Extremadura initiated the design, construction and management of the Radiological Alert Network of Extremadura (RAREx). The goal was to acquire reliable near-real-time information on the environmental radiological status in the surroundings of the Almaraz Nuclear Power Plant by measuring, mainly, the ambient dose equivalent. However, the phased development of this network has been carried out from two points of view. Firstly, there has been an increase in the number of stations comprising the network. Secondly, there has been an increase in the number of monitored parameters. As a consequence of the growth of RAREx network, large data volumes are daily generated. To face this big data paradigm, software applications have been developed and implemented in order to maintain the indispensable real-time and efficient performance of the alert network. In this paper, the description of the current status of RAREx network after 30 years of design and performance is showed. Also, the performance of the graphing software for daily assessment of the registered parameters and the automatic on real time warning notification system, which aid with the decision making process and analysis of values of possible radiological and non-radiological alterations, is briefly described in this paper.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.90-95
• /
• 2003

For the safety driving of an automobile which is become individual requisites, a new Neural Network algorithm which recognized the load vehicles in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of vehicles, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear image information is processed. 1-D LIPN hardware has been composed and various experiments with static and dynamic signals have been implemented.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권12호
• /
• pp.630-640
• /
• 2007

센서 네트워크의 응용 범위가 점차 넓어지면서 군사 분야나 방사능 감지와 같이 실시간성을 요구하는 응용분야가 생겨나게 되었다. 하지만 기존의 센서 운영체제 연구는 효율적인 자원 활용에 초점을 두고 연구가 진행되었기 때문에 실시간성을 만족시켜 주기 어려운 구조를 가지고 있다. 본 논문에서는 정시성을 보장하는 실시간 분산 객체 TMO 모델을 센서 네트워크의 제한된 자원 환경에 알맞도록 경량화 시킨 ${\mu}TMO$ 모델을 제안한다. ${\mu}TMO$ 모델을 이용한 실시간 센서 네트워크 운영체제를 개발하기 위하여 한국전자통신연구원에서 개발한 센서 노드용 운영체제인 Nano-Q+를 이용하였다. Nano-Q+의 타이머 모듈을 높은 해상도를 가질 수 있도록 수정하였으며, EDF(Earliest-Deadline-First)기반의 실시간 스케줄러에 CST(Context Switch Threshold)와 PAS(Power Aware Scheduling) 기법을 적용하여 센서 노드에 적합한 실시간 스케줄러로 변경하였다. ${\mu}TMO$ 모델을 지원하기 위해 채널 기반의 통신 수단인 ITC-Channel을 새롭게 구현하였으며, 주기적인 스레드를 관리하는 WTMT(Watchdog TMO Management Task) 모듈을 구현하여 SpM 스레드를 주기에 맞게 실행할 수 있도록 하였다.