• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.115-120
• /
• 2002

The rigid body properties of a structure may be estimated easily if the mass-line of the structure could be taken exactly. However, the exact mass-line may be hard to be obtained exactly in experiments. The mass line value can be read from the mass line in frequency response function. However, the mass lines in the frequency response function sometimes show the fluctuation with frequency, and it cannot be read correctly. In this paper, the wavelet transform is applied to obtain the good mass line value. The mass line calculated by using wavelet transform has unique value and showed in the range of fluctuated values of frequency response function. The rigid body properties obtained by wavelet transform also showed better results than those by fourier transform.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.9
• /
• pp.725-730
• /
• 2002

The rigid body properties of a structure may be estimated easily if the mass-line of the structure could be taken exactly. However, the exact mass-line nay be hard to be obtained exactly in experiments. The mass line value can be read from the mass line in frequency response function. However, the mass lines in the frequency response function sometimes show the fluctuation with frequency, and it cannot be read correctly. In this paper, the wavelet transform is applied to obtain the good mass line value. The mass line calculated by using wavelet transform has unique value and showed in the range of fluctuated values of frequency response function. The rigid body properties obtained by wavelet transform also showed better results than those by fourier transform.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.625-640
• /
• 2023

This paper propose a circuit that can measure the inductance of an inductive sensor used in IOT applications. The circuit was constructed using the characteristics of an RL low-pass filter circuit, comparator, current control switch, and capacitor, and the inductance value within the range 1[nH] < L ≤ 1[H] can be derived through the duration time during the output voltage of the RL low-pass filter circuit is greater than the reference voltage.

• Phonetics and Speech Sciences
• /
• v.6 no.3
• /
• pp.101-108
• /
• 2014

This study investigates the relation among pitch range differences, speech rate and realization of stress. To identify the realization of the stress, vowel formants and durational differences of stressed and unstressed vowels are measured. The Korean learners were asked to read a textbook passage which includes nine sentences. The major results indicate that: (1) Korean speakers' pitch range is less than 50% of the native speakers; (2) There is a significantly negative relation between high-low pitch range and speech rate; (3) The vowel qualities and durations of the stressed and unstressed vowels are related to the speech rate. But these are not related to the high-low pitch range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1452-1458
• /
• 2009

In this paper, Our proposed Multipurpose Complex Card UHF band RFID small-size Tag antenna. Multi purpose Complex Card UHF band RFID small-size Tag antenna that is to minimize the low efficiency of RFID Tag Read Range that generates space limitation and a conductor surrounded by inducing fingerpring system with dual(HF, UHF) Card is presented. Our proposed UHF band RFID small-size Tag antenna is for the Multipurpose Complex Card that is mounted on the fingerpring system as well as the HF Tag. It also enables to minimize and facilitates Tag chip matching by adjusting Tapered, Meander line and Loop structure. Given the card substance properties and periphery circuit, the proposed small-size Tag antenna, in this report, is designed with PET film with size of $50{\times}15mm^2$. The RFID small-size Tag method for measurements is used by EPCglobal Static Test instrument in Anechoic Chamber, which is tested with dual Card, within the car and in wallet. It is found that Read Range is 3.8m from the EPCglobal Static Test, Maximum Read Range within the car from the field test results in 7.6m. Proposed Tag antenna is will be used in the parking control security system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.168-175
• /
• 2017

In this paper, a 5V small-area NMOS-diode eFuse OTP memory cell is proposed. This cell which is used in PMICs consists of a 5V NMOS transistor and an eFuse link as a memory part, based on a BCD process. Also, a regulated voltage of V2V ($=2.0V{\pm}10%$) instead of the conventional VDD is used to the pull-up loads of a VREF circuit and a BL S/A circuit to obtain a wider operational voltage range of the eFuse memory cell. When this proposed cells are used in the simulation, their sensing resistances are found to be $15.9k{\Omega}$ and $32.9k{\Omega}$, in the normal read mode and in the program-verify-read mode, respectively. Furthermore, the read current flowing through a non-blown eFuse is restricted to $97.7{\mu}A$. Thus, the eFuse link of a non-blown eFuse OTP memory cell is kept non-blown. The layout area of the designed 1kb eFuse OTP memory IP based on Dongbu HiTek's BCD process is $168.39{\mu}m{\times}479.45{\mu}m(=0.08mm^2)$.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.659-670
• /
• 2022

An 830-Mb/s/pin transceiver for a controller supporting ×32 LPDDR2 memory is designed. The transmitter consists of eight unit circuits has an impedance in the range of 34Ω ∽ 240Ω, and its impedance is controlled by an impedance correction circuit. The transmitted DQS signal has a phase shifted by 90° compared to the DQ signals. In the receive operation, the read time calibration is performed by per-pin skew calibration and clock-domain crossing within a byte. The implemented transceiver for the LPDDR2 memory controller is designed by using a 55-nm process using a 1.2V supply voltage and has a maximum signal transmission rate of 830 Mb/s/pin. The area and power consumption of each lane are 0.664 mm² and 22.3 mW, respectively.

• Journal of Biomedical Engineering Research
• /
• v.42 no.5
• /
• pp.241-249
• /
• 2021

Recently, artificial intelligence for diagnosis system of obstetric diseases have been actively studied. Artificial intelligence diagnostic assist systems, which support medical diagnosis benefits of efficiency and accuracy, may experience problems of poor learning accuracy and reliability when inappropriate images are the model's input data. For this reason, before learning, We proposed an algorithm to exclude unread cervical imaging. 2,000 images of read cervical imaging and 257 images of unread cervical imaging were used for this study. Experiments were conducted based on the statistical method Radiomics to extract feature values of the entire images for classification of unread images from the entire images and to obtain a range of read threshold values. The degree to which brightness, blur, and cervical regions were photographed adequately in the image was determined as classification indicators. We compared the classification performance by learning read cervical imaging classified by the algorithm proposed in this paper and unread cervical imaging for deep learning classification model. We evaluate the classification accuracy for unread Cervical imaging of the algorithm by comparing the performance. Images for the algorithm showed higher accuracy of 91.6% on average. It is expected that the algorithm proposed in this paper will improve reliability by effectively excluding unread cervical imaging and ultimately reducing errors in artificial intelligence diagnosis.

• Nutritional Sciences
• /
• v.4 no.1
• /
• pp.55-62
• /
• 2001

Consumers'frequent use of micronutrient supplements has caused concerns o possible overdoses and prompted the view that the appropriate provision of nutrition information on such supplements is needed. In this study the nutrition information on vitamin-mineral supplements in Korea was evaluated based on the labels on the supplements. Consumers'use, reliance on and demand for nutrition information were examined by self-administered questionnaire. Subjects were 1,203 middle-aged housewives. Under examination were 141 multinutrient products (86.6%) and single nutrient products (13.4%). Various names and units were used for the same nutrient and the labels were not informative to consumers. The mode of nutrients contents in the supplements were several fold of RDA though not in the range of toxicity. %RDA value was seldom shown on the label. Currently these supplements are classified as general drugs in Korea so they are not subject to regulations on nutrition labeling. Half of the subjects read the nutrient content list but two-thirds of them did not understand the information. Numerous health claims related to diseases were listed on the label and more than half of the subjects read them and one-third believed those health claims. These results indicate the need for an appropriate format for nutrition information on vitamin-mineral supplements.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.565-568
• /
• 2005

RFID system allows contactless identification of objects, where small tags are attached to objects and information of objects are transferred using radio frequency. In recent years, industries have incorporated several identification systems to its production processes, which allow collecting automatically information about goods. In order to communicate with a single tag out of a group of tags, the target tag has to be identified. Therefore the read has to attempt to obtain the unique identification code of each tag within its read range. This paper presents performance results of QT and QT-sl protocols, which are tag identification protocols incorporating memoryless property. The memoryless property is that the current response of each tag only depends on the current query of the reader but not on the past history of the reader's queries.