• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1113-1118
• /
• 2008

Characteristics of reduction properties and carbon deposition of $CuFe_2O_4$ and $Fe_3O_4$ were investigated by using TGA, XRD, SEM, TEM and gas analysis at $900^{\circ}C$. XRD analyses indicated that the reduced $Fe_3O_4$ was composed of Fe, graphite and $Fe_3C$ phases. In contrast, the reduced $CuFe_2O_4$ did not show the graphite or $Fe_3C$ phases. It was observed by SEM analysis that the surface of the $Fe_3O_4$ was completely covered with carbon, after methane partial oxidation. From gas analysis, $CuFe_2O_4$ showed much higher methane conversion and reduction kinetics as compared to the $Fe_3O_4$ under the same reaction conditions and the estimated carbon deposition amounts on the reduced $CuFe_2O_4$ was much lower than those on the reduced $Fe_3O_4$ during the syngas production process. It was found by TEM that carbon on the reduced $Fe_3O_4$ particles has a platelet shape.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.798-806
• /
• 2017

A activated carbon (WCAC, waste citrus activated carbon) prepared from an agricultural waste citrus peel material generated in Jeju was utilized for the removal of dimetridazole (DMZ) antibiotics in aqueous solution. The adsorption of DMZ on WCAC was investigated with the change of various parameters such as contact time, dosage of WCAC, particle size of WCAC, temperature, pH, and DMZ concentration. The DMZ adsorption capacity increased with increasing temperature and decreasing particle size. Also it was decreased at less than pH 4 but sustained almost constantly at pH 4 or greater. Isotherm parameters were determined from the Langmuir, Freundlich, Redlich-Peterson and Duinin-Radushkevich (D-R) isotherm models. The isotherm data were best described by the Redlich-Peterson isotherm model. And the adsorption kinetics can be successfully fitted to the pseudo-second-order kinetic model. The results of the intra-particle diffusion model suggested that film diffusion and intra-particle diffusion were occurred simultaneously during the adsorption process. Meanwhile, the thermodynamic parameters indicated that the adsorption reaction of DMZ on WCAC was an endothermic and spontaneous process. The experimental results showed that WCAC is a promising and cheap adsorbent for the removal of DMZ antibiotics.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.455-462
• /
• 1995

The new six herbicidal N-[(pyrimidin-2-yl)aminocarbonyl]-2-substituted-6-(1-hydroxy-2-fluoroethyl)benzenesulfonamide derivatives(S) were synthesized and rate constants for the hydrolysis of thier in the range of pH $1.0{\sim}10.0$ have been studied in 15%(v/v) aqueous acetonitrile solution at $45^{\circ}C$. From the basis of the results, pH-effect, solvent effect, ortho-substituent effect, thermodynamic parameters(${\Delta}H^{\neq}$ & ${\Delta}S^{\neq}$), pKa constant(4.80), rate equation, analysis of hydrolysis products(2-(1-hydroxy-2-fluoroethyl)benzenesulfonamide & 4,6-dimethoxyaminopyrimidine), it may be concluded that the general acid catalyzed hydrolysis through $A-S_E2$ mechanism and specific acid catalyzed hydrolysis through A-2 type(or $A_{AC}2$) mechanism proceeds via conjugate acid($SH^+$) and tetrahedral intermediate(I) below pH 8.0, whereas, above pH 9.0, the general base catalyzed hydrolysis by water molecules(B) through $(E_1)_{anion}$ mechanism proceeds via conjugate base(CB). In the range between $pH\;7.0{\sim}pH\;9.0$, these two reactions occur competitively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.7-12
• /
• 1994

The kinetics of browning reaction of dried shrimp powder samples were investigated during storage. The temperature conditions of the ding process were $25^{\circ}C\;and\;45^{\circ}C$, and the samples were stored at water activity ($a_w$) of 0.33, 0.44, 0.52, 0.65 and temperatures of $35^{\circ}C,\;45^{\circ}C,\;55^{\circ}C$ and temperature fluctuations between $33^{\circ}C\;and\;55^{\circ}C$. When the shrimp was dried at $25^{\circ}C$ the activation energies obtained from the Arrhenius plot ranged from 13.57 to 14.33 kcal/mol. From these energies of activation, the $Q_{10}$ values at $25^{\circ}C$ showed 1.93 to 2.00. In the case of drying at $45^{\circ}C$ the activation energies were $13.12{\sim}13.61\;kcal/mol$ and $Q_{10}$ values were $1.89{\sim}1.93$, respectively. In addition, a storage study under square-wave fluctuating temperature conditions was carried out by varying the shrimp sample temperature between $35^{\circ}C\;and\;55^{\circ}C$ within 7 days regular fluctuation cycle. The data obtained from the fluctuating temperature storage study will be used in the prediction of shelf-lives. The shelf-lives assessed at $25^{\circ}C$ from the accelerated shelf-life tests ranged from 4 days at aw 0.65 to 139 days at aw 0.33.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.343-349
• /
• 1991

Formation of charge transfer complex between iodine and substituted aniline [aniline, N,N-dimethylaniline(N,N-DMA), 2,6-dimethylaniline(2,6-DMA), 2,4,6-trimethylaniline(2,4,6-TMA)] in CHCl$_3$, CH$_2$Cl$_2$ : CHCl$_3$ (1 : 1), and CH$_2$Cl$_2$ have been studied kinetically by using conductivity method. In the transformation of initially formed outer charge transfer complex to inner complex, the effects of substituted aniline as electron donor and polar medium on the reaction were investigated. The rate of transformation depend on the dielectric contribution of medium and pK$_a$ value of substituted aniline. The order of rate increasing is 2,4,6-TMA, 2,6-DMA, aniline, and N,N-DMA. The activation enthalpy ${\Delta}H^{\neq}$ for 2.5 M-substituted aniline in CHCl$_3$ at 25$^{\circ}C$ is respectively N,N-DMA, 3.47 kcal/mol; aniline, 4.25 kcal/mol; 2,6-DMA, 7.79 kcal/mol and 2,4,6-TMA, 7.96 kcal/mol; and activation entropy ${\Delta}S^{\neq}$ is large and negative value of -41 ~ -55 cal/mol${\cdot}$K.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.1
• /
• pp.19-27
• /
• 2014

Mg hydride has a high hydrogen capacity (7.6%), at high temperature, and is a lightweight and low cost material, thus it a promising hydrogen storage material. However, its high operation temperature and very slow reaction kinetics are obstacles to practical application. In order to overcome these disadvantages of Mg hydride, graphene powder was added to it. The addition of graphene has been shown to reduce the operating temperature of dehydrogenation. Moreover, in this report the environmental aspects of $MgH_x$-Graphene composites are investigated by means of the environmental life cycle assessment (LCA) method. $MgH_x$-Graphene mixture was prepared by hydrogen induced mechanical alloy (HIMA). The synthesized powder was characterized by XRD(X-ray Diffraction). The hydrogenation behaviors were evaluated by using a Sievert's type automatic PCT apparatus. Such evaluation of Materials also conducted in the LCA. From the result of P-C-T(Pressure-Composition-Temperature) curves, the $MgH_x$-3wt.% graphene composite was evaluated as having a 5.86wt.% maximum hydrogen storage capacity, at 523K. From absorption kinetic testing, the $MgH_x$-7wt.% graphene composite was evaluated as having a maximum 6.94wt.%/ms hydrogen absorption rate, at 573K. Environment evaluation results for the $MgH_x$-graphene composites and other materials indicated environmental impact from the electric power used and from the materials themselves.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.235-241
• /
• 1984

Two fractions of pectinesterase from Chinese cabbage were isolated by ammonium sulfate fractionation, ion exchange chromatography on DEAE-cellulose and Sephadex G-150 gel filtration. The fraction F-A and F-B were purified approximately 340- and 10-fold. The similar salt effects and pH optima (pH 7.5-8.0) were obtained for the two pectinesterase fractions. The maximum activity of both two. fractions were obtained at 20-50mM of divalent rations and at 250mM of monovalent rations. The apparent Michaelis constant of the F-A was 0.01% for citrus pectin. The temperature optima for F-A and F-B were $48^{\circ}$ and $55^{\circ}C$, respectively and both fractions were stable in the region of pH 5.0-8.0 at room temperature. The thermal inactivation of the two fractions followed the first order reaction kinetics. From D and Z-values obtained the thermal resistance of the two fractions were characterized.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.195-200
• /
• 1992

Rhizopus oryzae CJ-2114 was selected for its strong polygalacturonase activity among various strains of mold found in soil. The optimum pH for the enzyme activity was 4.0 and optimum temperature was 4$0^{\circ}C$. The activation energy for the polygalacturonase was calculated by Arrhenius equation was 2.048㎉/㏖. The reaction of this enzyme followed typical Michaelis-Menten kinetics with the Km value of 54.05mM with the $V_{max}$ of 13.9m mole/min. The enzyme is relatively stable in acidic condition. The activity of polygalactur-onase was inhibited completely by C $u^{2+}$, P $b^{2+}$ and Z $n^{2+}$, $_Mn^{2+}$ at concentration of 1 mM. The enzyme can be inactivated by the treatment with maleic anhydride and iodine. The results indicate the possible involvement of histidine at active site. When polygalacturonase from Rhizopus oryzae CJ-2114 was reacted with poly-galacturonic acid as a substrate mono-, di-, and oligogalacturonic acid were produced at early and mono-, digalacturonic acid produced at late incubation time. time.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.172-177
• /
• 2010

This study reports the high-temperature oxidation kinetics, ASR(area specific resistance), and interfacial microstructure of metallic interconnects coated with conductive oxides in oxidation atmosphere at $800^{\circ}C$, The conductive material LSC($La_{0.8}Sr_{0.2}CoO_3$, prepared by Solid State Reaction) was coated on the Crofer22APU. The contact behavior of coating layer/metal substrate was increased by sandblast. The electrical conductivity of the LSC coated Crpfer22APU was measured by a DC two probe four wire method for 4000hr, in air at $800^{\circ}C$. Microstructure and composition of the coated layer interface were investigated by SEM/EDS. These results show that a coated LSC layer prevents the formation and growth of oxide scale such as $Cr_2O_3$ and enhances the long-term stability and electrical performance of metallic interconnects for SOFCs.