• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.1-8
• /
• 2015

Wear leveling techniques have been studied to prolong the lifetime of NAND flash memory. Most of studies have used Program/Erase(P/E) cycles as wear index for wear leveling. Unfortunately, P/E cycles could not predict the real lifetime of NAND flash blocks. Therefore, these algorithms have the limited performance from prolonging the lifetime when applied to the SSD. In order to apply the real lifetime, wear leveling algorithms, which use raw Bit Error Rate(rBER) as wear index, have been studied in recent years. In this paper, we propose CrEWL(Cold data identification using raw Bit error rate in Wear Leveling), which uses rBER as wear index to apply to the real lifetime. The proposed wear leveling reduces an overhead of garbage collections by using HBSQ(Hot Block Sequence Queue) which identifies hot data. In order to reduce overhead of wear leveling, CrEWL does not perform wear leveling until rBER of the some blocks reaches a threshold value. We evaluate CrEWL in comparison with the previous studies under the traces having the different Hot/Cold rate, and the experimental results show that our wear leveling technique can reduce the overhead up to 41% and prolong the lifetime up to 72% compared with previous wear leveling techniques.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.166-169
• /
• 2013

In this letter, we propose a data randomization scheme for endurance and interference mitigation of deeply-scaled multilevel flash memory. We address the relationships between data patterns and the raw bit error rate. An on-chip pseudorandom generator composed of an address-based seed location decoder is developed and evaluated with respect to uniformity. Experiments performed with 2x-nm and 4x-nm NAND flash memory devices illustrate the effectiveness of our scheme. The results show that the error rate is reduced up to 86% compared to that of a conventional cycling scheme. Accordingly, the endurance phenomenon can be mitigated through analysis of interference that causes tech shrinkage.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.321-328
• /
• 2016

Typical MLC NAND flash devices are considered less reliable than SLC NAND flash devices. Although raw bit error rate (RBER) of MLC flash had been considered approximately 1000times or more higher than that of SLC flash, recent research conducted on Google's data center shows that it is much lower than such expectation. Based on the research, we devised In Drive Data Duplication (IDDD) scheme that efficiently exploit MLC flash's sufficient capacity to improve its data reliability without structural complexity increment using SSD intrinsic firmware layer, and showed the data reliability expectation of MLC flash could be significantly higher than that of SLC flash from measured and calculated error rates. Even though RBER of SLC flash was lower than that of MLC flash in 44 out of 48 cases we studied, applying IDDD scheme, RBER of MLC flash was became lower than that of SLC in all 48 cases and uncorrectable bit error rate (UBER) of MLC flash was became lower than that of SLC flash in 45 out of 48 cases.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.663-668
• /
• 2003

We studied a localized hologram recording method that can be used in a disk-shaped medium. In this method, the reference beam is focused by use of a cylindrical lens to get a thin spot in the medium, and then a hologram is recorded in that spot by illuminating the signal beam. Many localized holograms are multiplexed by shifting the medium by a distance more than the thin spot size of the reference beam. This method does not need recording-time scheduling for uniform diffraction efficiencies. We show that a minimal required thickness of the recording medium exists for a given spot size of the signal beam. We performed experiments for data storage and retrieval, and obtained a storage density of 20 bits/${\mu}{\textrm}{m}$$^2$ and a raw-bit error rate (RBER) of 2.5${\times}$10$^{-3}$ , when a 2 mm-thick Fe-doped LiNbO$_3$ crystal was used.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.70-75
• /
• 2014

Super-resolution near-field structure (super-RENS) read-out samples are affected by a nonlinear and noncausal channel, which results in inter-symbol interference (ISI). In this study, we investigate asymmetry or domain bloom in super-RENS in terms of equalization. Domain bloom is caused by writing process in optical recording. We assume in this work that the asymmetry symbol conversion scheme is to generate asymmetric symbols, and then a linear finite impulse response filter can model the read-out channel. For equalizing this overall nonlinear channel, the read-out signals are deconvolved with the finite impulse response filter and its output is decided based on the decision rule table that is developed from the asymmetry symbol conversion scheme. The proposed equalizer is investigated with the simulations and the real super-RENS samples in terms of raw bit error rate.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.283-286
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator ,data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic -sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu micorprocessor applied to the control of flexible link system with the sensor fault problems in the error module fer exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure

• Publications of The Korean Astronomical Society
• /
• v.29 no.3
• /
• pp.45-52
• /
• 2014

This paper describes the development of algorithm for direct data transmission between Raw VLBI Data Buffer (RVDB) and Huge Capacity Data Server (HCDS) operated in Korea-Japan Correlation Center (KJCC). The transmitted data is the VLBI observation data, which is recorded at each radio telescope site, and the data transmitting rate is varying from 1 Gbps, in usual case, upto 8 Gbps. The developed algorithm for data transmission enables the direct data transmission between RVDB and HCDS through 10 Gbps optical network using VLBI Data Interchange Format (VDIF). Proposed method adopts the conventional UDP/IP protocol, but in order to prevent the loss of data during data transmission, the packet error monitoring and data re-transmission functions are newly designed. The VDIF specification and VDIFCP (VDIF Control Protocol) are used for the direct data transmission between RVDB and HCDS. To validate the developed algorithm for data transmission, we conducted the data transmission from RVDB to HCDS, and compared to the transmitted data with the original data bit by bit. We confirmed that the transmitted data is identical to the original data without any loss and it has been recovered well even if there were some packet losses.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2357-2360
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu microprocessor applied to the control of flexible link system with the sensor fault problems in the error modulo for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.137-140
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu micorprocessor applied to the control of flexible link system with the sensor fault problems in the error module for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.155-160
• /
• 2005

In this paper, the channel decoder promising reliable data retrieving in noisy holographic channel has been developed for holographic WORM(write once read many) system. It covers various DSP(digital signal processing) blocks, such as align mark detector, adaptive channel equalizer, modulation decoder and ECC(error correction code) decoder. The specific schemes of DSP are designed to reduce the effect of noises in holographic WORM(H-WORM) system, particularly in prototype of DAEWOO electronics(DEPROTO). For real time data retrieving, the channel decoder is redesigned for FPGA(field programmable gate array) based hardware, where DSP blocks calculate in parallel sense with memory buffers between blocks and controllers for driving peripherals of FPGA. As an input source of the experiments, MPEG2 TS(transport stream) data was used and recorded to DEPROTO system. During retrieving, the CCD(charge coupled device), capturing device of DEPROTO, detects retrieved images and transmits signals of them to the FPGA of hardware channel decoder. Finally, the output data stream of the channel decoder was transferred to the MPEG decoding board for monitoring video signals. The experimental results showed the error corrected BER(bit error rate) of less than $10^{-9}$, from the raw BER of DEPROTO, about $10^{-3}$. With the developed hardware channel decoder, the real-time video demonstration was possible during the experiments. The operating clock of the FPGA was 60 MHz, of which speed was capable of decoding up to 120 mega channel bits per sec.