• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.438-452
• /
• 2022

For cuboid and ellipsoid crystallites of LiFePO₄ powders, by X-ray diffraction (XRD) and microscopic (TEM) studies, it is possible to determine the anisotropic parameters of the crystallite size distribution functions. These parameters were used to describe the cathode rate capability within the model of averaging the diffusion coefficient D over the length of the crystallite columns along the [010] direction. A LiFePO₄ powder was chosen for testing the developed model, consisting of big cuboid and small ellipsoid crystallites (close to them). When analyzing the parts of big and small rate capabilities, the fitting values D = 2.1 and 0.3 nm²/s were obtained for cuboids and ellipsoids, respectively. When analyzing the results of cyclic voltammetry using the Randles-Sevcik equation and the total area of projections of electrode crystallites on their (010) plane, slightly different values were obtained, D = 0.9 ± 0.15 and 0.5 ± 0.15 nm²/s, respectively. We believe that these inconsistencies can be considered quite acceptable, since both methods of determining D have obvious sources of error. However, the developed method has a clearly lower systematic error due to the ability to actually take into account the shape and statistics of crystallites, and it is also useful for improving the accuracy of the Randles-Sevcik equation. It has also been demonstrated that the shape engineering of crystallites, among other tasks, can increase the cathode capacity by 15% by increasing their size correlation coefficients.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.457-466
• /
• 2013

Wind energy is rapidly becoming significant generating technologies in electricity markets. As probabilistic nature of wind energy creates many uncertainties in the short-term scheduling, additional actions for reliable market operation should be taken. This paper presents a novel approach to evaluate ramping capability requirement for changes in imbalance energy between day-ahead market and real-time market due to uncertainty of wind generation as well as system load. Dynamic ramp rate model has been applied for realistic solution in unit commitment problem, which is implemented in day-ahead market. Probabilistic optimal power flow has been used to verify ramping capability determined by the proposed method is reasonable in economic and reliable aspects. This approach was tested on six-bus system and IEEE 118-bus system with a wind farm. The results show that the proposed approach provides ramping capability information to meet both forecasted variability and desired confidence level of anticipated uncertainty.

• Asian Journal of Business Environment
• /
• 제8권2호
• /
• pp.33-41
• /
• 2018

Purpose - This study aims to examine the determinants of income management of the public servant. Three independent variables are examined such as attitude towards money, financial capability and debt management while the dependent variable is financial wellbeing of public servants. Research design, data, and methodology - Quantitative research is applied in this study, and data are collected by using cross sectional approach. Survey questionnaires are obtained from 270 respondents, which represents 79% response rate. The multiple regressions are used to examine the influence of attitude towards money, financial capability and debt management towards financial wellbeing. Results - The result of the multiple regression indicated positive influences of attitude towards money and financial capability on financial wellbeing. However, debt management found no significant influence on financial wellbeing. Conclusions - Research findings show that people have different attitudes towards money and different trends of expenditure. It is also crucial to be highlighted that employees' attitude and financial capability have a greater influence on overall satisfaction with employees' financial wellbeing. Some would want to show off their luxury items they bought to close friends or relatives and some are very prudent in making expenditures even for necessity items.

• 한국유체기계학회 논문집
• /
• 제17권4호
• /
• pp.5-10
• /
• 2014

It is possible for the nation's largest flowmeter calibration system in K-water to calibrate flow rate up to $2,700m^3/h$ and diameter 800mm. However, the calibration and measurement capability of K-water's system is not satisfied in comparison with other developed countries. In this study, we find the dominant factors related to the uncertainty of weight and time measurement for gravimetric flowmeter calibration system. As a results of improving the system, the combined standard uncertainty has been improved $1.099{\times}10^{-3}$ to $2.332{\times}10^{-4}$. So calibration and measurement capability got 0.08 percent of the relative expanded uncertainty for maximum flow rate using the coverage factor(k=2).

• 한국안전학회지
• /
• 제13권4호
• /
• pp.59-70
• /
• 1998

In this study, response time index(RTI) of standard and quick response type sprinkler head are measured and compared through ramp and plunge test in heated wind tunnel. Also discharge rate and water distribution, actual delivered density(ADD), fire test with wood cribs are performed to compare the fire suppression capability and the operation time and temperature between standard and quick response type sprinkler head.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.107-111
• /
• 2004

This work describes the effect of composite conductor on the characteristics of electric double layer capacitor. Test cell, which was fabricated with conducting composite consisted of 80％ of SPB and 20％ of VGCF, exhibits the better tate capability and the lower resistance than those of the cells fabricated with single electronic conductor. These enhanced properties could be related with the decrease of contact resistance between the activated carbon powders.

• 전기화학회지
• /
• 제3권2호
• /
• pp.96-99
• /
• 2000

리튬 망간 산화물 박막의 고율 방전 특성을 향상시키기 위하여 사진 식각 법을 이용하여 미세 패턴된 양극 박막을 제조하였다. 방전 전류 밀도를 달리하여 측정한 결과, 리튬 이온의 intercalations kinetic레 관계하는 전하 전달 저항 값이 감소하게 되어 고율 방전 특성이 향상되었다.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.513-525
• /
• 2013

Purpose: The purpose of this paper are to propose a strategic map for hotel industry through analyzing the relationship between service resource, operational capabilities, and performance. Methods: A phone survey was conducted among Korean hotels, and 102 data sets were collected. Measurement items are assessed using both cognitive and objective scales. Results: As results, 'superior group', which is superior in both physical resources and human resources, is excellent in all capabilities and also in room occupancy rate. On the other hands, 'inferior group', which is inferior in both physical resources and human resources, shows lower achievements is in most areas except speed. In addition, physical superior group is better than human superior group in most capabilities except speed, but human superior group shows better results than physical superior group in both room occupancy rate and customer satisfaction. Conclusions: Through the empirical analysis, the conclusions attained are as follows; First, human resources affect customer satisfaction more directly that physical resources. Second, the balancing between physical resources and human resources has an importance to improve operational capabilities.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1140-1143
• /
• 2002

This work describes the effect of conducting composite on the characteristics of electric double layer capacitor. The cell, which was fabricated with conducting composite consisted of 50 wt.% of SPB and 50 wt.% of VGCF, exhibits the higher specific capacitance, the lower resistance and the better rate capability than those of the cells fabricated with each single electronic conductor. These enhanced properties could be related with the dense structure of electrode.

• Carbon letters
• /
• 제3권1호
• /
• pp.17-24
• /
• 2002

The electrochemical behavior of the $LiCoO_2$ electrode, containing carbon black as a conductor, depends upon the nature and characteristics of carbon black. In this study, six different kinds of carbon blacks were employed to investigate the relationship between the properties of carbon blacks and electrochemical characteristics of the electrode. The larger amount of surface oxygen functional groups brought the lower electrical conductivity for the carbon blacks. The electrical conductivity of carbon blacks was closely related to the impurities such as ash and volatile content. The rate capability and cyclability of the electrode were improved with the higher conductivity of carbon blacks used. So, it can be concluded that high conductive carbon black plays an important role as a conductor for high rate of charge-discharge capability and initial efficiency.