• 한국응급구조학회지
• /
• 제14권1호
• /
• pp.5-18
• /
• 2010

Objective : This study compares Video laryngoscope and Direct laryngoscope in tracheal Intubation on rapidity and accuracy by paramedic and aims to improve efficiency of airway management and survival rate in pre-hospital treatment for the patients with severe trauma, cardiac arrest or dyspnea caused by acute diseases. Methods : 60 paramedics were recruited from 13 fire stations located in C province. With the consent of the paramedics, likelihood ratio test was carried out and they were divided into two different groups; DL group (30) and GVL group (30). Regarding intubation conditions, difficult airway grade I, grade II and grade III as well as sniffing position and neutral position were examined. This study also compared between ambulance in motion and in stand still. Frequency, average and standard deviation were analyzed with statistics program, SPSS WIN 17.0 and repeated measure design was introduced to examine inter-relations between position, grade and groups. Results : Intubation was performed more rapidly in neutral position and GVL than in sniffing position and DL(F = 15.260, p = .000). Rapidity value was better with grade I and grade II than grade III and better with GVL than DL(F = 32.629, p = .000). Accuracy value was higher with neutral position and GVL than sniffing position and DL(F = 5.008, p = .011). grade III was less accurate than grade I, grade II and GVL was more accurate than DL(F = 10.966, p = .000). Ambulance motion status did not show any statistically significant differences in accuracy and rapidity. Conclusion : Given this study results, neutral position is better for the patient with severe trauma. For a better survival, GVL intubation can be considered since GVL can enhance accuracy as well as rapidity regarding difficult airway. Since there is no significant differences in ambulance motion factors, intubation can be recommended even in moving ambulance for shortening traveling time to a hospital.

• 한국레이저가공학회지
• /
• 제10권2호
• /
• pp.25-28
• /
• 2007

Rapidity and flexibility are very important in the electronic components industry. The laser process provides the industry with more rapidity and flexibility. For this reason, the laser process is considered as an acceptable method in terms of rapidity and flexibility. In this study, a wide range of experiments have been carried out on the gold wire-to-nickel thin film joining using the continuous wave fiber laser. In particular, changes in the shape of joint depending on the changes of a target point have been observed.

• 한국육종학회지
• /
• 제40권3호
• /
• pp.291-294
• /
• 2008

밀양 23호와 기호벼의 재조합 자식 164계통에 대하여 Rapid Visco Analyzer(RVA)방법으로 분석한 아밀로그램특성을 출수 후 15일째의 이삭무게를 출수 후 40일째의 이삭무게 비율로 계산한 초기급속등숙속도(rapidity of grain filling:RGF)품종군별로 호화온도, 최고점도, 최저점도, 최종점도, 강하점도, 응집점도 및 취반점도를 해석하였고 품종군별 아밀로그램특성간 상관관계를 분석하였다. 사용한 164 M/G RILs를 RGF에 따라서 완만등숙형(40%이하의 RGF), 준완만등숙형(41- 60% RGF), 준급속등숙형(61-80%RGF), 그리고 급속등숙형(81%이상 RGF)으로 구분되었으며 최고점도, 최저점도 및 취반점도는 RGF품종군별 일정한 경향을 보였다. 초기급속등숙속도를 기준으로 분류한 모든 품종군에서 강하점도와 취반점도는 고도의 부의 상관을 보였고 응집점도와 취반점도는 고도의 정의 상관을 보였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.291-298
• /
• 2004

Effective 3 dimensional modelling is to be essential work for design of construction, mechanic and industrial part. Especially, it makes possible for reverse design. It need rapidity, accuracy, reality. Data acquisition method for modelling are contact 3dimensional measurement system, LASER scanner, Pattern scanner, and digital photogrammetry. This study introduce to 3 dimensional modelling methods and analysis of these method. We tried to 3D modelling of automobile part using OPTO-Top pattern scanner which system have rapidity and accuracy, and compared effectiveness of each method. The 3D display web environment was made.

• Journal of information and communication convergence engineering
• /
• 제16권2호
• /
• pp.78-83
• /
• 2018

Rapidity and accuracy are important considerations when a drone is employed in a wide surveillance area to detect a target. They are more important when the scope of application is a search and rescue operation or the monitoring of natural disasters, which may require prompt warnings and response. During the actual operation of a drone, rapidity and accuracy are associated with the change in the altitude of the drone. The aim of this study is to analyze the characteristics of drones at varying altitudes and prove that altitude is a relevant factor in the performance of drones. Herein, the characteristics of the drone at varying altitudes were analyzed through several search simulations. The results suggest that a high-altitude drone is relatively advantageous compared to a low-altitude drone in a probability-based target search, and that the search altitude is also a very important and fundamental factor in target search by drones.

• 디지털융복합연구
• /
• 제20권2호
• /
• pp.175-184
• /
• 2022

본 연구는 COVID-19 불안감이 식생활 라이프스타일에 미치는 영향과 라이프스타일에 따른 드론 음식배달 서비스 태도에 미치는 영향을 조사하였다. 356명 중국 소비자를 대상으로 한 설문조사 연구결과는 첫째, COVID-19 불안감은 건강 지향형, 안전 지향형, 편의 지향형 라이프스타일과 정(+)의 관계가 있었다. 둘째, 건강 지향형, 유행 지향형, 편의 지향형의 경우 드론 음식배달 서비스의 안정성, 신속성, 부합성 인식과 긍정적인 관계가 있는 것으로 나타났다. 미각 지향형 라이프스타일은 서비스 안정성 인식, 안전 지향형 라이프스타일은 안정성 및 신속성 인식과 긍정적인 관계가 있는 것으로 나타났다. 셋째, 서비스의 인식된 안정성, 신속성, 부합성은 서비스 이용의도를 높이는 것으로 나타났다. 본 연구 결과는 COVID-19 불안감이 식생활 라이프스타일과 연관되어 드론 음식 배달서비스에 대한 소비자 태도에 영향을 미친다는 것을 보여준다.

• 전기의세계
• /
• 제20권1호
• /
• pp.19-23
• /
• 1971

In testing the moving balance of a rotor instead of strobotron system here to for in use, making the pick up touch the rotor without putting the subject on the testing table, we can observe both the corrected original point and its unbalance point which appeared on the Braun tube screen with naked eyes. Then we can do our correcting job with rapidity.

• 한국측량학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2006

효율적인 3차원 모델링은 건설, 기계 그리고 디자인과 같은 폭넓은 설계분야에서 필수적으로 되고 있다. 특히, 역설계를 가능케 하는 툴로써 발전하고 있다. 3차원 모델링은 신속성, 정확성 그리고 명확성이 요구된다. 모델링을 위한 데이터 획득은 접촉식 좌표측정기, 레이져스캐너, 패턴스캐너 그리고 수치사진측량방법을 이용한다. 본 연구에서는 모델링 기법을 분석하고 패턴스캐너를 이용한 3차원 모델링기법을 소개하고자 한다. 또한, 본 연구는 OPTO-Top 패턴스캐너를 이용하여 3차원 모델링을 시도하고 신속성과 효율성을 수치사진측량기법과 비교분석하였다. 아울러 3차원으로 사용자가 웹환경에서 시뮬레이션 할 수 있는 환경구축을 시도하였다.

• 한국중재학회지:중재연구
• /
• 제20권2호
• /
• pp.199-225
• /
• 2010

This study investigates the characteristics of local arbitration committees in China based on arbitration institution evaluation model. Most of the literature on Chinese arbitration committees only focuses on CIETAC. However, the promulgation of 1994 Chinese arbitration act allows local arbitration committees to deal the arbitration cases related with foreign element. Before 1994, only CIETAC and CMAC handle the arbitration cases related with foreign element. For the evaluation of the local arbitration committees, this study establishes the arbitration institution evaluation model. This model has seven evaluation criteria: accessability, independence, neutrality, rapidity, economy, professionality, and extent of enforcement. Our findings are as follows. First, Chinese local arbitration committees have the strengths in the fields of accessability, economy and rapidity. However, they are deficient in the area of neutrality, professionality, and independence. Second, the spatial distribution of Chinese local arbitration committees is not equal in China. The number of local arbitration committees is big in the high growth region such as Shandong province. On the other hand, the number of local arbitration committees is small in the economically stagnant area. Third, the size and activity of local arbitration committees are various. Some of them are very active in dispute resolution through arbitration in China. For example, Beijing Arbitration Committee(BAC), Wuhan, Quangzou Arbitration Committee play the important role in dispute resolution through arbitration. However, the large part of local arbitration committees is financially weak and depend on the local government's financial support.

• 한국정보시스템학회지:정보시스템연구
• /
• 제20권2호
• /
• pp.57-80
• /
• 2011

This study analyzed the effects of smart phone using for business on work performance in the field. We classified functional and practical aspects of smart phone affecting employee's work performance through former studies. As independent variables, we selected portability of equipment, rapidity of information and ease of use for functional side, and selected fit to work and subjective norms for practical side. And dependent variable was work performance. We also suggested that innovation resistance would be a moderator. The results showed that the effect of work performance was influenced by portability of equipment and fit to work. However, hypotheses on moderating effects of innovation resistance were not supported. This study made a discrimination in terms of an application phase of smart phone as against former studies. The results of this study will provide practical implications for related enterprises in the field to develop ways of using smart phone as an effective strategy.