• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.371-379
• /
• 2004

The purpose of this study was to investigate the changes and types of statistical methods used in the Korean Journal of Orthodontics (KJO) and the American Journal of Orthodontics and Dentofacial Orthopedics (AJODO) from )999 to 2003. The frequency of use, transitions, assumption check of statistical methods and types of advanced statistical methods were examined from each journal. The study consisted of 247 articles published in the KJO and randomly chosen 50 articles per year which were original articles and used statistical methods T-test, analysis of variance(ANOVA), correlation analysis, nonparametric analysis. regression analysis chi-square test. factor analysis, were the order of statistical methods most frequently used in the KJO, while t-test. ANOVA, nonparametric analysis, correlation analysis, regression analysis, chi-square test. factor analysis. were the order of statistical methods used in the AJODO The changes of statistical methods observed in the KJO were not significant $(X^2=17.4\;p=0.5881)$ but the changes observed in the AJODO was seen to be significant $(x^2=42.4,\;p=0.0397)$ Some of the studies examined had overlooked the assumptions of the statistical methods employed. Data investigation such as outlier should be performed before analysis and alternative statistical approaches are applied for a small sample size. Types of advanced statistical methods were factor analysis and discriminant analysis in the KJO and Intention-To-Treat (ITT) analysis in clinical trials through multi-center, survival analysis and Generalized Estimating Equations (GEE) in the AJODO. Appropriate analysis approaches and interpretations should be applied for the correlated and repeated measurements of the orthodontic data set.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.91-95
• /
• 2004

This study aims to analyze realities of oral health and related factors, and establish Structural Equation Modeling. The subjects of study were 9,340 elderly over age 65 who took the health examination(the first) for the local insured which National Health Insurance Corporation carried out in the survey area mentioned below from January 2002 to December 2002. The areas surveyed were 4 big cities including Seongbuk-ku, Seoul, 5 medium cities including Wonjusi, Gangwon-do, and 5 Counties including Yeong deok County, Kyeongbuk. Considering location and the scale of population, firstly, big unit areas(metropolitan city, province) were selected according to convenience, secondly, low unit areas(city, county, district) were selected randomly. The subjects were the elderly who took all tests including an oral examination and filled in the questionnaire. Major results from analysis are as follows: 1. Review of Composition Conception Validity As a result of analyzing composition conception validity of SEM including posture test, urine test, blood test, habits of eating, drinking and smoking, oral symptoms, and oral health status, using fit index such as GFI, CFI, TLI, and RMSEA, all were within fit range and composition conception validity was recognized. 2. As a result of analyzing SEM to find the relationship between each factor and oral health status, it was confirmed that all factors except urine test affected oral health status and the synthetic SEM to explain it could be established. In result, we could verify that the elderly of rural areas who had lesser experience of visiting a clinic and oral prophylaxis had a higher rate of caries, missing teeth, and denture need, and drinking and smoking negatively affected the rate of caries, periodontal, and missing teeth. Also, periodontal diseases were observed from 43.2% of the total elderly and much from the lower age. Most of oral disease can be prevented by right oral health behavior. Therefore through oral health professionals from each district public health center of the nation, oral health education for the elderly about right eating habits and oral health care should be carried out systematically and policy change to increase access to dental service is required lest that visiting a dental clinic should be impossible or oral health behaviors such as oral prophylaxis and denture wearing should be neglected by economic, geographical barriers. Also, to establish SEM to explain the relationship between oral health status and systemic health, more accurate test methods and effective index development should be preceded. Because items developed by National Health Insurance Corporation applied to this study without alteration, structuring a model had the uppermost limit. Continual study seems to be needed.

• Journal of agricultural medicine and community health
• /
• v.25 no.1
• /
• pp.99-112
• /
• 2000

This survey was conducted to assess the utilization of health center including health sub-center and community health post and the health service demand of residents in a urban and rural unified community. Officials in Up·Myun·Dong offices visited randomly sampled 4,027 households(4.6% of total households in unified City) which included 3,337 households in urban area(4.9% of total households) and 690 households in rural area(3.7% of total households) and interviewed with heads or housewives of the households in September, 1995. There were significant differences in health-related demographic characteristics including age-sex distribution, educational level, period of residence in the community and medical insurance status of the interviewees between urban and rural areas. Of the respondents, 64.8% in urban area and 55.6% in rural replied that they had utilized the health center in the past. The most common purpose for visiting the health center was to get vaccination in urban area and to get outpatient care in rural area. The top priority health center activity that needs to be reinforced was communicable disease control and over 90% of the respondents preferred to have mobile clinic and home health care service in were also highly demanded. Eighty-six percent of the urban respondents replied that a health sub-center must be established in urban area. In the rural area, 90.3% of the respondents replied that they wanted to maintain the health sub-center and 88.3% wanted to maintain the community health post. Along with the improvement of facilities and equipments of the health center by Rural Health Service Improvement Project, new health service programs must be developed to meet the demand of the community.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.25-32
• /
• 2000

This experiment was conducted to investigate the effect of feeding monensin on the growth performance and ruminal fermentation characteristics of Han-Woo cattle. Seventy two uncastrated Han-Woo male cattle(BW 267 kg) were randomly allotted to 0, 22, and 33 ppm monensin treatments, three replicates per treatment and eight heads per replicate. Animals were kept in an open barn for an 140-d feeding trial, Concentrates containing different levels of monensin and rice straw cut in 15cm length were fed ad libitum separately. The results obtained from this study were summarized as follows. 1. No significant difference was found in daily gain by monensin feeding. 2. Monensin did not affect the total feed (concentrate + roughage) intake: however, as the monensin level increased, the total feed intake tended to decrease, resulting in 5 % reduction in 33 ppm monensin treatment. 3. Although no significant difference was found among three treatments, 22 and 33 ppm monensin improved the feed efficiency(total feed/gain) by 5.2 % and 5.1 %, respectively, as compared to the 0 ppm monensin treatment. 4. Monensin did not affect the concentrations of ruminal total VFA and acetic acid consistently. Although not significant, monensin feeding of 22 and 33 ppm caused marked increase in ruminal propionic acid concentration, 13.8 % and 19.3 %, respectively. Ruminal butyric acid concentration decreased as monensin level increased. Monensin feeding, regardless of level, decreased the A/P ratio by 12.5 %. In conclusiuon, monensin feeding increased the propionic acid concentration, and decreased the butyric acid concentration and A/P ratio in the rumen. Animals fed monensin consumed less feed, causing the improvement in feed efficiency. Thus, monensin appeared to be a useful feed additive, directing the rumen fermentation in a more productive way. Feed efficiency improved similarly both in 22 and 33 ppm monensin treatments, indicating that 22 ppm might be good enough rather than the 33 ppm monensin level.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.6
• /
• pp.677-682
• /
• 1993

Background: Massive hemoptysis is a major clinical problem with high mortality. Bronchial artery embolization is well accepted and widely used for treatment of massive and recurrent hemoptysis, especially in patients with chronic diffuse pulmonary disease who are poor candidates for surgery. We evaluated the therapeutic effect of transcatheter arterial embolization for immediate control and prevention of recurrent hemoptysis. Method: We reviewed 20 cases(M:F=13:7) of bronchial artery embolization for the management of massive hemoptysis from Jun 1989 to Aug 1992 retrospectively. Results: Underlying causes of hemoptysis were pulmonary tuberculosis(n=14), bronchiectasis(n=3), aspergilloma(n=2) and paragonimiasis(n=1). Embolization material was choosed randomly gelfoam(n=7) or Ivalon(n=11) and in 2 cases both were used simultaneously. Target arteries of embolization were bronchial artery only in 15 cases, non-bronchial systemic arteries with or without bronchial artery in 5 cases. After the arterial embolization, immediate cessation of hemoptysis was achieved in 17 cases(85%) and total recurrence rate including 3 cases of immediate treatment failure was 50%. Among recurrences 3 cases were achieved lobectomy, 1 case was expired by asphyxia due to massive hemoptysis and remained 6 were managed by medical conservative treatment with no further recurrence of hemoptysis during follow up periods. Conclusion: Bronchial artery embolization for treatment of massive or recurrent hemoptysis was effective in immediate bleeding control. Despite high recurrence rate the rebleeding after embolization was less severe and controllable by conservative management. Bronchial artery embolization is valuable as primary trial to massive hemoptysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.182-190
• /
• 2009

Statement of problem: Microleakage at the occlusal and gingival margin of Class V cavities restored with composite resin has traditionally been considered an obstacle to successful restoration. Purpose: The aim of this study was to assess the effectiveness of three different surface sealants(Fortify, Permaseal and Biscover LV) on the marginal sealing of Class V light-activated composite resin restorations(Z250). Material and methods: Forty noncarious human premolars and molars extracted within a three-month period were selected. Class V cavities with the occlusal margin in enamel and gingival margin in cementum were prepared in both buccal and lingual surfaces. The teeth, randomly assigned in four groups with twenty cavities in each group, were restored with composite resin after applying an adhesive system(Clearfil SE bond). After the finishing and polishing procedures, the restorations were covered with a specific surface sealants, except for the control samples, which were not sealed. After placing restorations, the specimens were thermocycled, and immersed in a 2% methylene blue solution for twenty four hours and sectioned longitudinally. The marginal microleakage was evaluated at the occlusal and gingival interfaces using a microscope and compared among the four groups using ANOVA test and Wilcoxon Rank-Sum test($\alpha$=0.05). Results: Statistical analysis showed that there was significantly less leakage when the surface sealants were used than there was in control group(P<.05). There were no significant differences of microleakage at occlusal and gingival margins among groups. There were no significant differences between microleakage of occlusal and gingival margins in each group. Fortify was not statistically different from control group at the gingival margin(P>.05). Conclusion: Application of surface sealants was an effective method of surface coating in reducing microleakage at occlusal and gingival margins of Class V composite resin restorations. However, it is certain that some microleakage still occurred despite the application of surface sealants, especially gingival margins.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.105-115
• /
• 2008

Statement of problem: Proper finishing and polishing enhance both the esthetics and the longevity of restored teeth. Blade finishing technique would be suited for smoothing and finishing. Evaluation of this technique are necessary. Purpose: The purpose of this study was to evaluate the blade finishing and polishing procedures on the surface profile and roughness of ormocer-based composite resin and nanohybrid composite resin. Material and methods: The material included a ormocer-based composite resin ($Admira^{(R)}$ & $Admira^{(R)}$ Flow); a nanohybrid composite resin ($Grandio^{(R)}$ & $Grandio^{(R)}$ Flow). One hundred forty specimens of each group were prepared using a mylar strip and randomly divied into blade finishing and rubber polishing groups (n=10). The average surface roughness (Ra) in micrometers was measured and the surface profile was examined by scanning electron microscopy (SEM) (Magnification ${\times}$ 200). The data were analyzed by Mann-Whitney Test at 0.05 significance level. Conclusion: The results of this study indicated that the mylar strip produced the smoothest surface on all materials and among the finishing-polishing methods was not significanct difference (P>0.05). Ormocer-based flowable composite resin performedthe lowest variability in initial surface roughness among the tested materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.169-174
• /
• 2008

Statement of problem: Changes of the marginal bone around dental implants have significance not only for the functional maintenance but also for the esthetic success of the implant. It was proposed that bone-retention elements such as microthreads at the coronal part of implant might help maintain the marginal bone level. Purpose: This study was designed to evaluate the effect of microthread configuration within the marginal coronal portion of the implant fixture at the marginal bone changes after loading around two different external hex implants. Material and methods: Twenty-four patients were included and randomly assigned to treatment with $Br{{\aa}}nemark$ system implants (Group 1, rough-surfaced implants, n=20) and Oneplant system implants (Group 2, rough-surfaced neck with microthreads, n=20). Clinical and radiographic examinations were conducted at baseline (implant loading) and 1 year postloading. Data analysis was performed by the SAS statistical package version 9.1.3 (SAS Institute, Cary, NC, USA) and the final model was calculated by the MIXED procedure (three-level ANCOVA) for marginal bone change of each test group at baseline and 1 year follow-up. Results: Comparing to baseline, significant differences were noted in marginal bone level changes for the 2 groups at 1 year follow-up (P<0.05). Group 1 had a mean crestal bone level changes of $0.83{\pm}0.31mm$; Group 2 had a mean crestal bone level changes of $0.44{\pm}0.36mm$. Rough-surfaced with microthreads implants showed significantly less marginal bone loss than rough surfaced neck without microthread implants. Conclusion: A rough surface with microthreads at the implant was beneficial design to maintain the marginal bone level against functional loading.

• Journal of Aquaculture
• /
• v.21 no.1
• /
• pp.26-33
• /
• 2008

This study investigated the synergistic effects of dietary supplementation of quartz porphyry(QP) and a laboratory developed feed stimulants, BAISM(BS) on growth performance and utilization as the additives for juvenile eel Anguilla japonica. Six isoenergetic experimental diets(18.2 kJ/g) were formulated to contain 50% crude protein, 15% lipid with or without dietary QP(Song-Gang stone, Davistone, Korea) and BS supplementation. QP and BS were provided at 0% in the control diet($Q_0B_0$) and at 0.7% QP+0% BS($Q_{0.7}B_0$), 0.7% QP+0.3% BS($Q_{0.7}B_{0.3}$), 0.7% QP+0.5% BS($Q_{0.7}B_{0.5}$), 0.7% QP+0.75% BS($Q_{0.7}B_{0.75}$) and 0.7% QP+1.0% BS($Q_{0.7}B_{1.0}$) in experimental diets on dry matter basis. After four weeks of adaptation, triplicate groups of 30 fish initially averaging $15{\pm}0.1g(mean{\pm}SD)$ were randomly distributed into each aquarium, and they were fed one of the experimental diets for 8 weeks. By the end of the feeding trial, weight gain(%), specific growth rate(%), feed efficiency(%) and protein efficiency ratio of fish fed diet $Q_{0.7}B_{0.5},\;Q_{0.7}B_{0.75}\;and\;Q_{0.7}B_{1.0}$, were significantly higher(P<0.05) than those of fish fed the other diets. But, $Q_{0.7}B_{0.5},\;Q_{0.7}B_{0.75}\;and\;Q_{0.7}B_{1.0}$ were no significant differences(P<0.05). In challenge test, fish were infected by intraperitoneal injection of 0.1 mL bacterial suspension with Edwardsiella tarda per fish after the feeding trial. As a result, fish fed QP and BS supplemented diets have a significantly higher cumulative survival rate than those of fish fed control diet(P<0.05). In conclusion, these results indicated that the optimum dietary supplementation level of QP and BS could be approximately 0.7% quartz porphyry+0.5% BAISM($Q_{0.7}B_{0.5}$) of diet based on WG, FER, SGR, PER, cumulative survival rate in juvenile eel A. japonica.