• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1028-1035
• /
• 1999

To increase the throughput of data transmission in burst-mode TDMA communication systems and also to get a good BER performance at the same time, it is essential to rapidly acquire the carrier while keeping the desirable tracking performance. To achieve this goal, in this paper, a new decision-directed carrier recovery algorithm is presented. The proposed scheme does not incorporate the PLL and suppress the Gaussian random process of input noise by the pre-stage low pass filter so as to get both the fast acquisition and a good performance. Through computer simulations, the performance of the scheme is analyzed with respect to the acquisition time and bit error rate. The cycle slip in the proposed scheme is seldom observed at very low SNR environment in contrast to the previous proposed one. Because of this merit, it is not required to do the differential encoding and decoding in the proposed scheme.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.2
• /
• pp.29-39
• /
• 2018

In this paper, we discuss a discrete-time queueing system with dyadic server control policy that combines workload control and multiple vacations. Customers arrive at the system with Bernoulli arrival process. If there is no customer to serve in the system, an idle single server spends a vacation of discrete random variable V and returns. The server repeats the vacation until the total service time of waiting customers exceeds the predetermined workload threshold D. In this paper, we derived the steady-state workload distribution of a discrete-time queueing system which is operating under a more realistic and flexible server control policy. Mean workload is also derived as a performance measure. The results are basis for the analysis of system performance measures such as queue lengths, waiting time, and sojourn time.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.116-123
• /
• 2013

This paper represents generation of time-varying underwater acoustic channels by performing scattering simulation with time-varying ocean surface and Kirchhoff approximation. In order to estimate the time-varying ocean surface, 1D Pierson-Moskowitz ocean power spectrum and Gaussian correlation function were used. The computed scattering coefficients are applied to the amplitudes of each impulse of BELLHOP simulation result. The scattering coefficients are then compared with measured doppler spectral density of signal components which were scattered from ocean surface and the correlation time used in the Gaussian correlation function was estimated by the comparison. Finally, bit-error-rate and channel correlation simulations were performed with the generated time-varying channel based on passive time-reversal communication scenario.

• Korean Journal of Materials Research
• /
• v.12 no.3
• /
• pp.211-214
• /
• 2002

Properties of 52/48 PZT films with various thicknesses for piezoelectric micro-electro mechanical systems (MEMS) devices fabricated by multi-coating method on $Pt(3500{\AA})/Ti(400{\AA})/SiO_2(3000{\AA})/Si$(525$\mu\textrm{m}$) substrates were investigated. PZT films were deposited by spin-coating process at 3500 rpm for 30 sec, followed by pyrolysis at 45$0^{\circ}C$ for 10 min producing the thickness of about 120nm. These processes were repeated 4, 8, 12, 16 and 20 times in order to have various thicknesses, respectively. Finally, they were crystallized at $650^{\circ}C$ for 30 min. All thick PZT films showed dense and homogeneous surface microstructures. Thick PZT films showed crystalline structures of random orientations with increasing thickness. Dielectric constants of thick PZT films were increased with increasing film thickness and reached 800 at 100kHz for 2.3$\mu\textrm{m}$ thick PZT film. $P_r\; and\; E_c$ of 2.3$\mu\textrm{m}$ thick PZT films were about 20$\mu$C/$\textrm{cm}^2$ and 63kV/cm. Depth profile analysis by Auger Electron Spectroscopy (AES) of 4800 $\AA$ thick PZT film showed the formation of the perovskite phase on Pt layer by Pb diffusion behavior. It was considered that Pb-Pt intermediate layer promoted PZT (111) columnar structures.

• The Journal of Korean Medical History
• /
• v.22 no.2
• /
• pp.7-13
• /
• 2009

Background : To understand Korean medicine it is crucial to first understand medical aspect of 'DongUiBoGam'. It is also meaningful that it became one of the influential book even to posterity. Also based on the apprehension, we can take a view of development of Korean medicine led by 'DongUiBoGam'. Objectives : This study aims to review the status, study field, specialist of DongUiBoGam. In the process, this review will grasp trends in this field of studies and will direct further researches into the right direction. Method : The computerized Korean databases were searched from their respective inceptions up to December 2008. The search terms used were 'DongUiBoGam' and random or Korean language terms related to DongUiBoGam. Several specialized journals were also manually searched for relevant articles. Result : Since the 2000s, DongUiBoGam papers in the Korean Literature is increased. Published 58 papers on The Korean Journal of Oriental Medical Prescription were more than the other journals. 58 papers published in The Korean Journal of Oriental Medical Prescription are the best in many areas related to Korean medicine. Most people have submitted papers related to DongUiBoGam was Woo-yeal Jeong. Conclusions : 'DongUiBoGam' research is conducted and current tendency and outlook for 'DongUiBoGam' is carried out focusing on several associations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.396-396
• /
• 2013

The resistive random access memory (ReRAM) has several advantages to apply next generation non-volatile memory device, because of fast switching time, long retentions, and large memory windows. The high mobility of monolayered graphene showed several possibilities for scale down and electrical property enhancement of memory device. In this study, the monolayered graphene grown by chemical vapor deposition was transferred to $SiO_2$ (100 nm)/Si substrate and glass by using PMMA coating method. For formation of metal-oxide nanoparticles, we used a chemical reaction between metal films and polyamic acid layer. The 50-nm thick BPDA-PDA polyamic acid layer was coated on the graphene layer. Through soft baking at $125^{\circ}C$ or 30 min, solvent in polyimide layer was removed. Then, 5-nm-thick indium layer was deposited by using thermal evaporator at room temperature. And then, the second polyimide layer was coated on the indium thin film. After remove solvent and open bottom graphene layer, the samples were annealed at $400^{\circ}C$ or 1 hr by using furnace in $N_2$ ambient. The average diameter and density of nanoparticle were depending on annealing temperature and times. During annealing process, the metal and oxygen ions combined to create $In_2O_3$ nanoparticle in the polyimide layer. The electrical properties of $In_2O_3$ nanoparticle ReRAM such as current-voltage curve, operation speed and retention discussed for applictions of transparent and flexible hybrid ReRAM device.

• Environmental Engineering Research
• /
• v.17 no.2
• /
• pp.83-88
• /
• 2012

Currently, the technology of $CO_2$ capture and storage (CCS) has become the main issue for climate change and global warming. Among CCS technologies, the prediction of $CO_2$ behavior underground is very critical for $CO_2$ storage design, especially for its safety. Hence, the purpose of this paper is to model and simulate $CO_2$ flow and its heat transfer characteristics in a storage site, for more accurate evaluation of the safety for $CO_2$ storage process. In the present study, as part of the storage design, a micro pore-scale model was developed to mimic real porous structure, and computational fluid dynamics was applied to calculate the $CO_2$ flow and thermal fields in the micro pore-scale porous structure. Three different configurations of 3-dimensional (3D) micro-pore structures were developed, and compared. In particular, the technique of assigning random pore size in 3D porous media was considered. For the computation, physical conditions such as temperature and pressure were set up, equivalent to the underground condition at which the $CO_2$ fluid was injected. From the results, the characteristics of the flow and thermal fields of $CO_2$ were scrutinized, and the influence of the configuration of the micro-pore structure on the flow and scalar transport was investigated.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.136-142
• /
• 2016

The influences of fluorescence, scattering, and flocculation in random media were interpreted for the scattered fluorescence intensity and wavelength, it has been studied the molecular properties by the spectroscopy of laser induced fluorescence(LIF). The effects of optical properties in scattering media have been found by the optical parameters(${\mu}_s$, ${\mu}_a$, ${\mu}_t$). Flocculation is an important step in many solid-liquid separation processes and is widely used in Photodynamic therapy. The interactions of several colloid particles can come into play which have major effect on the flocculation and LIF process. We measured scattering and fluorescence spectra of the sample in vitro as function of distance from lase source to detector. The value of scattering coefficient ${\mu}_s$ is and ${\beta}$-carotene were measured as larger values(I, ${\delta}$) by means of closer distance from source to detector.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.135-143
• /
• 1998

Several equalizers are applied to the DVD-ROM(Digital Versatile Disc-Read Only Memory) system. Because imperfect writing process may cause nonlinear distortion in the reply signal, neural equalizers which have strong nonlinear mapping capability are applied to the system to compensate the nonlinear distortion. Experimental results to verify that the combination of decision-feedback type equalizers and modulation code is formidable are also given. The experimental results shwo that the SNR gain of the neural equalizers over the conventional equalizers becomes much as the nonlinearity in the channel increases. Furthermore, the decision-feedback type equalizers outperform the equalizers which have no decision-feedback in eliminating ISI(Intersymbol Interference) of random data sequence but there is no performance gain of the decision-feedback type equalizers over the equalizers without decision-feedback when these are applied to compensate the ISI of modulation-encoded data sequence.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.2
• /
• pp.134-142
• /
• 2012

This paper analyze an LDPC code replication method suitable for cloud computing. First, we determine the number of blocks suitable for cloud computing through analysis of the performance for the file availability and storage overhead. Also we determine the type of LDPC code appropriate for cloud computing through the performance for three types of LDPC codes. Finally we present the graph random generation method and the comparing method of each generated LDPC code's performance by the iterative decoding process. By the simulation, we confirmed the best graph's regularity is left-regular or least left-regular. Also, we confirmed the best graph's total number of edges are minimum value or near the minimum value.