• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1262-1268
• /
• 2015

I In power transmission systems, voltage changes continuously as reactive power is whether over supply or shortage. Reactive power produces in generators and consumes in transmission lines, and loads. Voltages at end points of transmission lines rise which is called Ferranti effect. Excessive voltage rising can reduce transmission equipment life, the voltage rising is usually permitted within the limit of 10%~30% excess. Shunt reactors are installed in transmission lines to put a curb on voltage rising. In this paper, we tried to do modelling for shunt reactor configuration types which are no grounding, grounded and grouded neutral reactor. Simulation are carried out for reactor magnitude for compensating transmission line capacitance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.975-980
• /
• 2017

Overhead catenary system of electric railway has overlap sections which devide and tighten trolley wire supplying electric power to train, where current collection performances may become worse according to railway speed-up. Current collection tests conducted at 400 km/h test-bed section of Honam high-speed railway show that balanced line arrangement at overlap section is needed to secure current collection without arc generation between trolley wire and train current collection device. This paper proposes a design procedure of the overlap section to allow for tension increase and uplift of the trolley wires according to railway speed-up. By applying the proposed procedure to the overhead catenary system of Honam high-speed railway, it is suggested that the minimum span length should be 33.2 m for railway speed-up to 350 km/h and 43.7 m for speed-up to 400 km/h.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1821-1829
• /
• 2017

A point machine requires lots of time and attention in terms of maintenance, since it causes 40% of failures among the railway signaling devices. The senescence of the point machine critically matters to the overall turnout system. In this paper, we analyzed the aging characteristics of the point machine by using the switching current of the point machine. The analysis is done based on the switching current measurements of the point machines deployed in the Sehwa outdoor test site and the Korail Kyongbu line. It is expected that the analysis result can be utilized for real-time diagnosis in the aspect of the maintenance of the point machines and predicting abnormal operations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.1
• /
• pp.1-5
• /
• 2019

The overhead contact line (OCL) is a key piece of equipment for transmitting electrical energy to the pantograph of rail cars. Recently, a 400 km/h OCL was applied to the Honam high-speed line, and its performance was examined by running HEMU-430X. For the study, we analyzed the current of catenary wire concurrently while running HEMU-430X in the Honam high-speed line. Specifically, this study recorded the currents for each speed during operation of the railway vehicle. The analysis of the frequency of line current showed generation of third-harmonics, 15th-harmonics, 17th-harmonics, and 19th-harmonics. The current of catenary wire is a basic technology assessment used to determine the electrical safety of electric railway systems, and it can be used as a technology for analyzing circulating currents generated in the current configuration, as well as for analyzing electric fatigue of the OCL components.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.251-254
• /
• 2011

This paper describes the design and implementation of the DMI display based on ERTMS specification for the Integrated Onboard Signaling System (IOSS). IOSS is consists of ATS, ATC, and ATP based on ERTMS/ETCS Level 1. We propose an improved DMI display design which has single layout concept for the IOSS. When a train is in the ATS, ATC, or ATP railway section, it is protected by the ATS, ATC, or ATP equipment, respectively. Therefore, DMI should display the different information according to the each signaling system. We design DMI display implemented as single layout for ATP, ATS and ATC information. This single layout display has a well integrated look and feel using the ERTMS specification and layout. This is for the driver to perceive the information easily and not to experience inconvenience resulting from the sense of difference when the train crossed into the different signaling section. Finally, we show the implementation result following this concept.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.315-321
• /
• 1999

The railway signaling system consists of microcomputerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control, The software plays a major role in these microcomputer-based vital systems. Therefore it is important to design the software and validate the required levels of safety and reliability To verify the conditions and functions of signaling logic, the laboratory prototype test bench, which consists of personal computers, VME system and Ethernet LAN, will be developed. In this paper general design of signaling system test bench for high-speed rail is described and some developed subprogram is presented.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.20-30
• /
• 2017

Due to the evolution of wireless communications technology, Long Term Evolution (LTE), which is a $4^{th}$ generation mobile communications system, has been adopted as a railway communications system. This LTE Railway (LTE-R) system is composed of various elemental functions, which are largely categorized into public safety and wireless communications for train control. Research on the public safety functions of railway communications have their roots in TRS based national public safety communication systems, and research on wireless communications functions for train control have their roots GSM-R, which is utilized by the ETCS in Europe. Based on these circumstances, this paper first analyzes the requirements for developing public safety technology in LTE-R, and compares those requirements with the functions of public safety LTE (PS-LTE), which is being deployed for the first time in the world by the South Korean government. Based on an analysis of the common and specific functions of LTE-R and PS-LTE, we conclude that there is little problem in integrating LTE-R and PS-LTE from the perspective of functionality. Second, this paper provides a comparison of the LTE-R requirements for the Quality of Service (QoS) with those of GSM-R utilized by the ETCS. This offers a guideline to allow LTE-R to be applied to a 500km/h train control system.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.55-63
• /
• 2017

Railway interlocking systems which are safety-critical systems are rapidly changed from relay-based systems to computer-based systems which have high flexible. Computer-based interlocking systems (CBI) are consisted of hardware and software in which system safeties arise one of important problems. The interlocking software of the CBI influences directly to the system safeties. "z" notation is one of formal methods have been used for system software specification to secure system safety. In this paper, the specification of interlocking logics for CBI systems is realized using "z" notation and verifies it with Z/EVES.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.204-206
• /
• 2007

The portion of embedded software in railway signaling system is increased by the advance of computer and communication technology. And the safely requirements for railway system are standardized by int'l std., such as IEC 62278 and IEC 62279. According to these circumstances for software safety problems, we are deduced the testing items for software safety test and assessment for railway signaling. Testing tools used for embedded software are surveyed to find a feasible safety assessment architecture. And the architecture of automatic test tool is proposed to test the deduced safely testing items in this paper.

• Journal of the Korean Society for Railway
• /
• v.1 no.1 s.1
• /
• pp.10-19
• /
• 1998

Described in this paper is the software to design of a railway interlocking table, which describes the functional specifications of an interlocking device. Interlocking tables has been designed mainly based on personal expertise among signal engineers. However, this expertise needs to be analyzed with technical uniformity and integrated in an organized system. The proposed software is amount to the signal engineer's expertise, yet a generalization of interlocking reasoning. The algorithm is based on the train route setting principle, and is applicable in solving practical problems by computers. The software was evaluated through man-made and machine-made interlocking tables are compared. The evaluation results proves the software to be effective for computer control of the signaling system as interlocking system with a much improved safety.