• 한국측량학회지
• /
• 제14권2호
• /
• pp.229-239
• /
• 1996

교통기관으로서의 역할을 충분히 수행하기 위해서 철도속도향상을 통한 운행시간 단축은 인간의 생활양식 고급화 및 시간가치의 증대로 인해 절실히 요구되는 사항으로 부각되고 있다. 특히 열차운행속도에 매우 큰 영향을 주는 선형 요소는 곡선구간으로서, 우리나라의 경우 곡선구간이 많은 비율을 차지하고 있어 이 구간에서의 속도향상은 전체구간의 운행시간을 단축시킬 수 있기 때문에 우리나라의 선형에 대한 특성을 고려하여 곡선부 전체구간에 걸쳐서는 선형을 지배하고 있는 요소의 개량 및 부분적 개량방법으로 사용되는 완화곡선 연장기법을 각 단계에 걸쳐 주행안정성 및 승차감의 지표로서 이용하고 있는 횡가속도 값을 적용하여 속도향상를 통한 운행시간 단축효과를 얻었다. 이 결과 우리나라 선형조건상 곡선부 전구간을 개량하는 것이 운행시간을 단축하기 위해서는 완화곡선의 연장 방법 보다 효과적임을 나타내고 있다.

• 터널과지하공간
• /
• 제12권3호
• /
• pp.179-188
• /
• 2002

본 연구는 한 경부 고속철도 터널의 NATM 굴착에 의한 2 arch 확공 굴착 시 발생되는 진동 및 응력의 변화가 터널 및 인근 사면에 미치는 영향을 사전에 파악하여 안정성을 검토하는 데에 그 목적이 있다. 지반물성치를 산정하기 위해 시추공 조사, TV검층 및 속도검층을 실시하였다. 2차원 해석을 통해 불확실한 지반의 물성을 변수로 간주하고 가능한 범위 내에서 해석을 수행함으로서 특정한 지반 물성이 입력 정수로서 결정되었다. 정적 및 발파 진동에 의한 준-정적(pseudo-static)안전율을 계산하였으며, 3차원 해석을 통해 터널굴착으로 인한 터널 및 터널 주변의 거동과 터널 지보재의 적정성 여부를 조사하였다.

• 한국정밀공학회지
• /
• 제29권6호
• /
• pp.626-631
• /
• 2012

In this study, fatigue life of the motor block bracket units for KTX-Sancheon trains was assessed. Design evaluation for railway structures was performed based on the UIC 566 regulation, and test and evaluation of fatigue life in welded parts was performed in accordance with standard ERRI B 12/RP17 and ERRI B 12/RP60. The actual vehicle dynamic stress testing was executed in KTX-Sancheon service line with the service operating speed. The dynamic stress was measured with commercial data acquisition system (MGC plus). The cumulative damage was evaluated by applying standard BS 7608 - Class F and cycle counting was used rain-flow counting method. As a result, the motor block bracket units for KTX-Sancheon trains was designed to fit the regulation and the safety of fatigue life for 30 years, assuming that KTX-Sancheon trains travels 600,000km annually, were confirmed under current operating conditions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1051-1059
• /
• 2008

In the development process of an ECU (Electrical Control Unit), numerous tests are necessary to evaluate the performance and control algorithm. The vehicle based test is expensive and requires long time. Also, it is difficult to guarantee the safety of the test driver. To overcome the various problems faced in the development process, the ECU test has been done using HIL (Hardware In the Loop). The HIL environment has the actual hardware including an ECU and a virtual vehicle model. In this paper, the test platform environment is devloped for the AWS ECU black box test. The test platform is built on HIL (Hardware In the Loop) architecture. Using the developed test platform, the control algorithm of the AWS ECU can be evaluated under the virtual driving condition of the bi-modal tram. Driving conditions, such as a front steering angle and vehicle velocity, are defined through the PC (Personal Computer) input. Input signals are transformed to electrical signals in the PC. These signals become the input conditions of the AWS ECU. The AWS ECU is stimulated by arbitory input conditons, and responses of the system are observed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1209-1212
• /
• 2008

동력분산형 고속전철은 분산된 EMI 발생원(source)을 가지도록 제작되기 때문에, 분산된 전자계 감수품(感受品, victim) 가까이에서 기존의 동력집중형 시스템보다 전자계 발생원을 더 많이 가지고 있다. 이 연구에서는, 전자계 발생원들과 전자계 감수품들을 확인하고, 고속전철 시스템의 안전 운행을 위하여 EMI/EMS/EMC를 취급하는 방법을 개발한다. 개발되는 내용은, 고속전철의 전자파 장해 방지 측정과 기준연구, 제어용 부품 등에 대한 EMI/EMS 기준 수립, 그리고 시제품에 대한 EMI/EMC 시험 및 평가이다. 또한 최신 무선 통신 장비에 의한 영향과 PLD(전원선 교란)에 의한 효과도 이 연구에서 조사될 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.20-27
• /
• 2009

This paper presents an analytic study for replacement of the ballast track in existing subway bridge by the Precast slab panel(B2S) track. To evaluate the dynamic responses on application of B2S track, the time history analysis with the 3D modeling. A total of two models, which were one ballast track bridge and B2S track bridge, were used in the FE analysis. The results of this study show that the dynamic displacement and acceleration of the B2S track bridge were significantly reduced for a higher train speed, compared to the ballast track bridge. Also, the replacement of the ballast track bridge in existing subway bridge by the B2S track increased the structural safety of bridge and ensured sufficient dynamic stability and serviceability. As a result, the servicing subway bridge with B2S track system has need of the reasonable measures which could be reducing the static and dynamic response and improving the performance.

• 자연, 터널 그리고 지하공간
• /
• 제1권2호
• /
• pp.59-71
• /
• 1999

Recently, many deformations in tunnel such as crack and leakage were occulted. Specially, the defects of tunnel lining have been a serious problem in safety and stability many repair works for maintenance in tunnel have been carried out. Therefore, it is necessary to estimate the structural cracking for countermeasure in deformed tunnel and to investigate on the characteristics of lining system and the soundness of tunnel. In this study model tests for tunnel lining were carried out using test apparatus and centrifuge, In the direct loading test, the prototype was Kyungbu high-speed railway tunnel and the scale is 1/10, and lining models were made of concrete. Test conditions included load conditions such as direction, shape and type, lining conditions such as single and double lining, thickness, and reinforcement. In centrifuge model test, the prototype was Seoul subway tunnel and the scale is 1/100, and lining models were made of aluminum and hydrostone. Test conditions included tunnel defects such as thickness shortage. behind cavity and longitudinal cracks, reinforcement methods such as epoxy, grouting and carbon sheet. From these model tests , the characteristics of deformation and failure for tunnel lining were estimated, and the structural behaviors of deformed lining and the effects of repair and reinforcement for tunnel lining were researched.

• 설비공학논문집
• /
• 제22권8호
• /
• pp.509-514
• /
• 2010

A numerical simulation of passenger evacuation in a subway station was performed by coupling the passenger flow analysis and the fire simulation. The algorithm of the passenger flow analysis was based on a DEM (Discrete Element Method) using the potential map of the direction vector for each passenger. This algorithm was improved in the present study as to use finer grid smaller than a passenger in order to resolve detailed geometry of the station and to resolve the behavior of passengers in the bottleneck at the ticket gate considering the collision of passengers to a wall or with other passengers. In the fire simulation, the CO distribution predicted by using CFD was used to take into account the effect of toxic gases on the passengers' mobility. The methodology proposed in the present study could be used in designing safer subway station in case of fire occurrence.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.508-513
• /
• 2006

Anchor bolt in baseplate fastenings on the slab track is an important component to conform placing and safety of fastenings. Due to the way of load transmission control of fastenings, sometimes anchor bolt has to be applied lateral load. So we have to take care for it when we design. Especially, in the case of anchor bolt which is applied loads repeatedly, we have to consider fatigue failure. If parts of machine are damaged in static loads, stress will exceed the yield strength. So parts could be transformed largely. Therefore because they are visible to the naked eyes, we can replace parts before failure. However, because fatigue failure that are invisible to the naked eyes happen unexpectedly, it's very dangerous. To make a reasonable design of anchor bolts, we will analyze them by changing diameters of anchor bolt, quality of insert, initial gap between anchor bolt and insert, the presence of insert, etc. which affect the stresses of anchor bolts. We can get the maximum and minimum amplitude of stress through the modified Goodman diagram or Smith diagram which represents limit of all strengths and stress components to the average stress. We also tried to show the way of examining the expected th life of anchor bolt briefly through considering above.

• Wind and Structures
• /
• 제32권5호
• /
• pp.453-469
• /
• 2021

Snow accumulation on the road frequently induces a big traffic problem in the cold snowy region. Accurate prediction on snow distribution is fundamental for solving drifting snow disasters on roads. The present study adopts the transient method to simulate the wind-induced snow distribution on embankment based on the mixture multiphase model and dynamic mesh technique. The simulation and field measurement are compared to confirm the applicability of the simulation. Furthermore, the process of snow accumulation is revealed. The effects of friction velocity and snow concentration on snow accumulation are analyzed to clarify its mechanism. The results show that the simulation agrees well with the field measurement in trends. Moreover, the snow accumulation on the embankment can be approximately divided into three stages with time, the snow firstly deposited on the windward side, then, accumulation occurs on the leeward side which induced by the wake vortex, finally, the snow distribution reaches an equilibrium state with the slope of approximately 7°. The friction velocity and duration have a significant influence on the snow accumulation, and the vortex scale directly affected the snow deposition range on the embankment leeward side.