• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.627-635
• /
• 1997

In general, the booming noise intensity at tunnel exit is strongly related to the gradient of the compression wave front created by high speed train entering the tunnel. This paper presents some results in relation with the compression wave front produced when the high speed train enters a tunnel. Four kinds of tunnel entrance shape with real dimensions were studied to investigate the formation of compression wave front inside tunnel by train entering tunnel. Computations were carried out using three-dimensional compressible Euler equation with vanishing viscosity and conductivity of fluid. According to the reslts, the flow disturbance occured at tunnel entrance were eliminated by tunnel hood with same cross sectional area. The compression wave front is formed completely at 30-40m from tunnel entrance. The maximum pressure gradient of compression wave front is reduced by 29.8% for the inclined tunnel hood and reduced by 21.5% for the tunnel hood with holes at the top face with tunnel without hood. The length of the inclined hood is 15m and the length of the hood with holes is 20m.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1189-1194
• /
• 2011

도시형 자기부상열차는 전자기력으로 레일에서 낮은 높이로 부상하여 운행되는 열차이다. 자기부상열차는 궤도와의 직접적인 접촉 없이 움직이기 때문에 소음이 적고 기계적 마찰에 의한 진동이 거의 발생하지 않는다. 또한 급곡선 주행이 가능하고 경사도가 높은 언덕지역도 쉽게 주행 할 수 있기 때문에 도심에서의 새로운 교통수단으로 주목받고 있다. 따라서 도시형 자기부상열차의 성공적인 실용화를 위하여 제3궤조 전차선로 설비와 인터페이스를 통하여 안전성과 신뢰성 확보는 필수 고려 사항중 하나이다. 특히 파워레일, 신축확장장치, 절연 구분장치, 지지금구와 같은 제3궤조 전차선로 설비는 내 부식성, 시공의 편의성 및 유지보수성을 고려하여 설치되어야 한다. 본 논문에서는 자기부상열차 시스템 구축을 위한 제3궤조 설비의 구성요소에 대한 인터페이스 항목을 분석하고 전차선로의 안전성을 높일 수 있는 시스템 엔지니어링 인터페이스 체계를 제시하고자 한다. 또한 제안하는 자기부상용 제3궤조 전차선로 시스템은 한국기계연구원내 시험을 통하여 시스템의 안전성을 증명하였으며, 시스템 구성품의 수명분석을 통해 제3궤조 전차선로 운영의 신뢰성을 향상시키고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.311-318
• /
• 2000

In this paper, the process of development of resilient sleepers, which improves the train safety, passenger comport and reduces the noise and vibration, is discussed. To determine the required material properties of elastic pad, static and dynamic simulations are performed and is applied in manufacturing. From the experiment results, it is investigated that the displacement is less for sleeper with elastic pad than that in ordinary PC form. The rate of displacement is also shown In be less for the sleeper with elastic pad. These results indicate that the elastic pad can reduce possibility of rail-corrugations and thus resulting in the reduction of maintenance costs.

• 터널과지하공간
• /
• 제4권2호
• /
• pp.77-86
• /
• 1994

The vibration resulting from track-train interaction is transmitted through the tunnel structure and the surrounding ground to adjacent buildings. This paper provides a review of the ground vibration propagation mechanism and the theoretical isolation effectiveness of each transit systems. Moreover, predictive vibration values estimated from various models are compared with measured results performed in Seoul Metropolitan Subways and evaluate the applicability of those models.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.816-816
• /
• 2009

In order to attenuate structural waves in railway track, damped mass-spring absorber system and spring supported system are considered that are attached continuously along the beam length. A mathematical model is presented for the propagation of structural waves on a finitely long, periodically supported classical beam. The model in this paper could represent a railway track where the beam represents the rail and an appropriately chosen support type represents the pad/sleeper/ballast system of a railway track. And in this study, it is presented that the measurement method of health monitoring of railway track.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.61-69
• /
• 2011

The noise and vibration which are occurred by equipment and rail under the train are directly delivered to passenger and effect on comfort. For this reason, Floating floor structure has been applied to Rolling Sotck for minimizing the noise and vibration. And in respect of Floating floor, the strength is an important design element. Because the train has many heavy equipments and accommodates lots of passenger. At the early design stage of Floating floor, different joint type and thickness of plywood, etc. were applied and some problem happened. To solve the problems and apply to the future projects, the standard model of Floating floor structure was required. To find optimum design and standard model for Floating floor structure of Rolling Stock, the applied Floating floor models were analysed by CAE (computer-aided engineering).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.71-76
• /
• 2010

This paper presents the feasibility for improving the ride quality of railway vehicle equipped with semi-active suspension system using magnetorheological(MR) fluid damper. In order to achieve this goal, a fifteen degree of freedom of railway vehicle model, which includes a car body, bogie frame and wheel-set is proposed to represent lateral, yaw and roll motions. The MR damper system is incorporated with the governing equation of motion of the railway vehicle which includes secondary suspension. To illustrate the effectiveness of the controlled MR dampers on railway vehicle secondary suspension system, the sky-hook control law using the velocity feedback is adopted. Computer simulation for performance evaluation is performed using Matlab. Various control performances are demonstrated under external excitation which is the creep force between wheel and rail.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.349-356
• /
• 2001

The dynamic behavior of high speed train is very Important because the railway should be safe and Is satisfied tilth the rode comfort of passengers. The train is composed of many suspension components. such as 1st springs, 1st dampers, 2nd springs and 2nd dampers, that have an influence on the dynamic characteristics of high speed train. Also, the wheel/rail shapes, the track conditions and geometry and many environmental factors, such as rain, snow and wind. affect the dynamic behavior of high speed train. This paper reviews the effect of wind and track conditions on the dynamic behavior of high speed train. The VAMPIRE program Is used for this simulation. The result of simulation shows that the high speed train should not be operated when the wind velocity is beyond 34.5 m/sec.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.134-138
• /
• 2008

We present a power gating turn-on mechanism that digitally suppresses ground-bounce noise in ultra-deep submicron technology. Initially, a portion of the sleep transistors are switched on in a pseudo-random manner and then they are all turned on fully when VVDD is above a certain reference voltage. Experimental results from a realistic test circuit designed in 65nm bulk CMOS technology show the potential of our approach.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.164-171
• /
• 2003

Dynamic analysis using impulse responses is formulated to estimate effect of slider rail shape on dynamic responses in near-field optical recording drive. Impulse responses are obtained on numerical nonlinear model including rigid motion of a slider and fluid motion of an air bearing under the slider. Dynamic characteristics of slider motion are evaluated by utilizing the decay ratio of impulse responses and modal frequencies from frequency response functions. The dynamic characteristics of the designed NFR slider are checked by comparing those of a HDD slider(Nutcracker). Also, sensitivities of slider Position conditions and rotation speed on the dynamic characteristics are investigated.