• The Korean Journal of Nuclear Medicine
• /
• v.32 no.1
• /
• pp.99-108
• /
• 1998

Intraperitoneal administration of radioisotopes is suggested to treat the metastatic ovarian cancer in the peritoneal cavity. Administering beta-emitting radioisotopes into the peritoneal cavity allows the maximum energy delivery to the cancerous cells of the peritoneal wall surface while sparing the normal cells located in deep site of the peritoneal wall. In this study, dose estimates of the peritoneal wall are provided to be used for prescribing the amount of $^{166}Ho$-chitosan complex administered. The $^{166}Ho$-chitosan complex diffused in the peritoneal fluid may attach to the peritoneal wall surface. The attachment fraction of $^{166}Ho$-chitosan complex to the peritoneal wall surface is obtained by simulating the ascites with Fischer rats. Both volume source in the peritoneal fluid and the surface source over the peritoneal wall surface are counted for the contribution to the peritoneal wall dose. The Monte Carlo code EGS4 is used to simulate the energy transfer of the beta particles emitted from $^{166}Ho$. A plane geometrical model of semi-infinite volume describes the peritoneal cavity and the peritoneal wall. A semi-infinite plane of $10{\mu}m$ in thickness at every 1 mm of depth in the peritoneal wall is taken as the target in dose estimation. Greater than 98 percents of attachment fraction has been observed from the experiments with Fischer rats. Given $1.3{\mu}Ci/cm^2$ and $2.4{\mu}Ci/ml$ of uniform activity density, absorbed dose is 123 Gy, 8.59 Gy, 3.00 Gy, 1.03 Gy, and .327 Gy at 0 mm, 1 mm, 2 mm, 3 mm, and 4 mm in depth to the peritoneal wall, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.25-29
• /
• 1972

This experiment was carried out to investigate the role of Silicon accumlated in rice plant under different conditions of light and humidity, using radioisotopes Ca-45, Mn-54, and P-32. This results obtained in are as follows; 1. Light effect is more severe in phosphate uptake by rice plant than is calcium. Amounts of phosphate uptake in light condition is six times more than in dark conditions, while that of calcium is double. 2. Change of relative humidity affects calcium absorption and transport from root to shoot. It seems not to be influenced in phosphate and manganese uptake by relative humidity. 3. More uptake of each element Ca-45, P-32, or Mn-54 was found in the rice plant applied with silicic acid. It is considered that there must be some relationship between silicon content and ion uptake in rice plant. 4. The transport ratio of nutrient from root to shoot shows a specific pattern that calcium is approximately 1.0 manganese 0.5 and phosphate 0.2 respectively.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.1 no.1
• /
• pp.23-30
• /
• 2015

Radioisotopes emitting low-range highly ionizing radiation such as ${\beta}$-particles are of increasing significance in internal radiotherapy. Among the ${\beta}$-particle emitting radioisotopes, $^{67}Cu$ is an attractive radioisotope for various nuclear medicine applications due to its medium energy ${\beta}$-particle, gamma emissions, and 61.83-hour half-life, which can also be used with $^{64}Cu$ for PET imaging. The production and application of the ${\beta}$-emitting radioisotope $^{67}Cu$ for therapeutic radiopharmaceutical are outlined, and different production routes are discussed. A survey of copper chelators used for antibody labeling is provided. It has been produced via proton, alpha, neutron, and gamma irradiations followed by solvent extraction, ion exchange, electrodeposition. Clinical studies using $^{67}Cu$-labelled antibodies in lymphoma, colon carcinoma and bladder cancer patients are reviewed. Widespread use of this isotope for clinical studies and preliminary treatments has been limited by unreliable supplies, cost, and difficulty in obtaining therapeutic quantities.

• Nuclear Engineering and Technology
• /
• v.39 no.6
• /
• pp.747-752
• /
• 2007

The Proton Engineering Frontier Project (PEFP) has designed and developed a proton linear accelerator facility operating at 100 MeV - 20 mA. The radiological effects of such a nuclear facility on the environment are important in terms of radiation safety. This study estimated the production rates of radionuclides in the soil around the accelerator facility using MCNPX. The groundwater migration of the radioisotopes was also calculated using the Concentration Model. Several spallation reactions have occurred due to leaked neutrons, leading to the release of various radionuclides into the soil. The total activity of the induced radionuclides is approximately $2.98{\times}10^{-4}Bq/cm^3$ at the point of saturation. $^{45}Ca$ had the highest production rate with a specific activity of $1.78{\times}10^{-4}Bq/cm^3$ over the course of one year. $^3H$ and $^{22}Na$ are usually considered the most important radioisotopes at nuclear facilities. However, only a small amount of tritium was produced around this facility, as the energy of most neutrons is below the threshold of the predominant reactions for producing tritium: $^{16}O(n,\;X)^3H$ and $^{28}Si(n,X)^3H$ (approximately 20 MeV). The dose level of drinking water from $^{22}Na$ was $1.48{\times}10^{-5}$ pCi/ml/yr, which was less than the annual intake limit in the regulations.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.204-212
• /
• 2021

Background: Identification of radioisotopes for plastic scintillation detectors is challenging because their spectra have poor energy resolutions and lack photo peaks. To overcome this weakness, many researchers have conducted radioisotope identification studies using machine learning algorithms; however, the effect of data normalization on radioisotope identification has not been addressed yet. Furthermore, studies on machine learning-based radioisotope identifiers for plastic scintillation detectors are limited. Materials and Methods: In this study, machine learning-based radioisotope identifiers were implemented, and their performances according to data normalization methods were compared. Eight classes of radioisotopes consisting of combinations of ²²Na, ⁶⁰Co, and ¹³⁷Cs, and the background, were defined. The training set was generated by the random sampling technique based on probabilistic density functions acquired by experiments and simulations, and test set was acquired by experiments. Support vector machine (SVM), artificial neural network (ANN), and convolutional neural network (CNN) were implemented as radioisotope identifiers with six data normalization methods, and trained using the generated training set. Results and Discussion: The implemented identifiers were evaluated by test sets acquired by experiments with and without gain shifts to confirm the robustness of the identifiers against the gain shift effect. Among the three machine learning-based radioisotope identifiers, prediction accuracy followed the order SVM > ANN > CNN, while the training time followed the order SVM > ANN > CNN. Conclusion: The prediction accuracy for the combined test sets was highest with the SVM. The CNN exhibited a minimum variation in prediction accuracy for each class, even though it had the lowest prediction accuracy for the combined test sets among three identifiers. The SVM exhibited the highest prediction accuracy for the combined test sets, and its training time was the shortest among three identifiers.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.707-716
• /
• 2023

The influence of waste technological waters of thermal and fast reactors of Beloyarsk NPP (Russia) on the accumulation of ⁶⁰Co, ⁹⁰Sr and ¹³⁷Cs in macrophytes and ichthyofauna of the cooling pond has been studied. Critical radionuclides, routes of their entry into the ecosystem and periods of maximum discharge of radioisotopes into the cooling pond have been determined. It is shown that the technology of electricity generation at the Beloyarsk NPP, based on fast reactors, has a much smaller effect on the release of artificial radionuclides into the environment. Therefore, during the entire period of monitoring studies (1976-2019), the decrease in the specific activity of radionuclides of NPP origin in macrophytes was 13-25800 times, in ichthyofauna 1.5-44.5 times. The maximum discharge of artificial radionuclides into the Beloyarsk reservoir was noted during the period of restoration and decontamination work aimed at eliminating the emergencies at the AMB reactors of NPP. The factors influencing the accumulation of artificial radionuclides in the components of the freshwater ecosystem of the Beloyarsk cooling pond have been determined, including: the physicochemical nature of radioisotopes, their concentration in surface water, the temperature of the aquatic environment, the trophicity of the reservoir, the species of hydrobionts.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.41-47
• /
• 2017

Considering that the X-ray apron used in the department of radiology is also used in the department of nuclear medicine, the study aimed to analyze the shielding rate of the apron according to types of radioisotopes, thus ${\gamma}$ ray energy, to investigate the protective effects. The radioisotopes used in the experiment were the top 5 nuclides in usage statistics $^{99m}Tc$, $^{18}F$, $^{131}I$, $^{123}I$, and $^{201}Tl$, and the aprons were lead equivalent 0.35 mmPb aprons currently under use in the department of nuclear medicine. As a result of experiments, average shielding rates of aprons were $^{99m}Tc$ 31.59%, $^{201}Tl$ 68.42%, and $^{123}I$ 76.63%. When using an apron, the shielding rate of $^{131}I$ actually resulted in average dose rate increase of 33.72%, and $^{18}F$ showed an average shielding rate of -0.315%, showing there was almost no shielding effect. As a result, the radioisotopes with higher shielding rate of apron was in the descending order of $^{123}I$, $^{201}Tl$, $^{99m}Tc$, $^{18}F$, $^{131}I$. Currently, aprons used in the nuclear medicine laboratory are general X-ray aprons, and it is thought that it is not appropriate for nuclear medicine environment that utilizes ${\gamma}$ rays. Therefore, development of nuclear medicine exclusive aprons suitable for the characteristics of radioisotopes is required in consideration of effective radiation protection and work efficiency of radiation workers.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2007

In this study, the change of neutron detection can be use the basic data of asphalt content detector under the influence of the jurisdiction and usage of radioisotopes are limited of $100[{\mu}Ci]$ or less. To obtain neutron detector's properties using design materials in first step phase, the change of neutron detection is to be calculated how can be increase or decrease due to the change of asphalt content, also it look over the change results which is installed absorber(cadmium plate) around moderator(polyethylene) using MCNP Code.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s01
• /
• pp.40-47
• /
• 1989

In spite of the development of highly sophisticated instrument, the precise quantitation of plant hormones still has many difficulties. Due to their high specificity, sensitivity and minimal sample purification steps, immunological assays have been widely applied for plant hormone assay. Enzme-linked immunosorbent assay technique for the determination of plant hormones was developed by Voller in 1978. Immunological assays are accomplished by competition of labeled tracer antigen and unlabeled antigen for a limited number of specific antibodies. The use of enzyme as replacement labels for radioisotopes enabled much of the sensitivity and specificity of radioimmunoassay (RIA) to be retained but without the inherent disadvantage of high capital cost, potential health hazard, and short shelf life of the labeled reactants.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.5 no.2
• /
• pp.129-134
• /
• 2019

Over a few decades, copper radioisotopes and their chelation chemistry for radiopharmaceuticals have played crucial role in the radiopharmaceutical science area. A variety of chelators have been required for their stable targeting ability in physiological conditions. For radiolabeling with copper-64 into biomolecules, thermodynamic stability, kinetic inertness, pH stability, and redox stability should be considered. In this regard, many researchers have attempted to develop the chelators that can bind with copper more tightly, rapidly and stably for copper radiolabeling. This review discusses the chemistry of copper, its suitable chelators and characteristics, while elucidating the evaluations of each chelator for radiolabeling.