• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1346-1349
• /
• 2002

This paper presents the design and implementation of 16-QAM modem that can be applied to fixed broadband wireless access systenm. It is implemented in the hardware prototype that consist of FPGA(Field Programmable Gate Array) for digital signal processing and analog front end module for analog signal processing. We provide 20.48Mbps data rate using implemented modem and test the modem in KOREA 26㎓ broadband wireless local loop system including IFU(Intermediate Frequency Unit) and RFU(Radio Frequency Unit) via air interface.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.789-796
• /
• 2013

Next Generation Weapon system from the center of the platform to share information in real-time Network Centric Warfare(NCW: Network Centric Warfare) has been changed. Data link system is defined as a network. That is, all in real-time battlefield information is to enable sharing. Data link system is classified as a precision strike, Monitoring/control, control of a Patriot missile battery systems. These systems are most effective in a Joint warfare and precision strike. Data Link Systems(Data Communications) implementation is accomplished by using the KDLM(Korean Data Link Modem) and Radio Transceiver. KDLM is operated in conjunction with the legacy Radios(re-using fielded HF/VHF/UHF radio systems). In this paper, we describe in terms of KDLM system design. In this paper, the proposed design structure is how to effectively interact with legacy various radio. First, The results provide an analysis of that Dynamic TDMA system and apply modem structure. Radio characteristics data are necessary for an effective TDMA system design. This article analyzes the test results and describes the structure to improve the receive performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.197-200
• /
• 2002

The current Inn technique is many problems that is permission of radio station using RF Wireless Modem, that is influence of geographic obstacle using radio wave, that is frequency interference, that is finiteness of frequency resources. In this paper, we are solved many elements, IM replaces RF Wireless Modem, we suggest transmission technique of correction message using mobile phone, we researched Interface Module development which is linkage of DGPS receiver and mobile phone. IM can transmit correction message passing RS-232 port and modem communication control. IM of base station is initialized RS-232 port and modem to move station for correction message transmission, IM waited response mode. IM of move station is initialized RS-232 port and modem, IM requests hand shaking to base station, completed connection establishment. Users are worked Differential surveying using receiving correction message between mobile phones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.921-927
• /
• 2006

The current DGPS technique is many problems that is permission of radio station using RF Wireless Modem, that is influence of geographic obstacle using radio wave, that is frequency interference, that is finiteness of frequency resources. In this paper, we are solved many elements, IM(Interface Module) replaces RF Wireless Modem, we suggest transmission technique of correction message using mobile phone, we researched Interface Module development which is linkage of DGPS receiver and mobile phone. IM can transmit correction message passing RS-232 port and modem communication control. IM of base station is initialized RS-232 port and modem to move station for correction message transmission, IM waited response mode. IM of move station is initialized RS-232 port and modem, IM requests hand shaking to base station, completed connection establishment. Users are worked Differential surveying using receiving correction message between mobile phones.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.177-181
• /
• 2004

It is as research about embodiment of MAC algorithm that is point of wireless LAN technology that is radio skill that is receiving present head of a family footlights, and embodied MAC that is algorithm that control modem Rf and host interface to level that existent common use radio AP and send-receive of high speed are available that embody function that is presented to IEEE 802.11 specs using H/W and S/W. When embody actually, tested module that embody actually using module modem and RF part because test is impossible after have common use product. Also, module that embody actually designed, and is expected to be utilized in radio LAN system construction of high speed late considering CRC and FCS ewer on channel.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1940-1943
• /
• 2002

In this paper, we presented the design and implementation of 155Mbps satellite Modem adaptively compensated against the rain attenuation. In order to compensate the rain attenuation over high-speed satellite ink, the adaptive coding schemes with variable coding rates and the pragmatic TCM that can be decoded both the QPSK and TC-8PSK using same Viterbi decoder was studied and analyzed. The pragmatic TCM with rate 213, selected to the optimal parameters for implementation, was modeled by VHDL in this paper. The key design issues are how to achieve a high data rate and how to integrated into a single ASIC chip various functions such as the different data rates, Scrambler/descrambler, Interleaver, Encoder/decoder, and BPSK/QPSK/8PSK modulator/demodulator. The implemented 155M0ps adaptive MODEM has the simplified interface circuits among the many functional blocks, and parallel processing architecture to achieve the high data rate. This 155Mbps adaptive MODEM was designed and implemented by single ASIC chip with the 0.25 $\mu\textrm{m}$ CMOS standard cell technology.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.419-426
• /
• 2002

The conventional RTK-GPS technique has many problems which are permission using RF wireless modem, influence of geographic obstacle using radio wave, frequency interference, finiteness of frequency resources. To solve these problems, in this paper, we designed the DGPS correction message transmission system as a method to substitute the RF wireless modem of RTK-DGPS receiver. Then the interface module was designed and implemented for linkage of GPS receiver and mobile phone. As a result worked differential surveying using receiving correction message using RS-232C and communication control, users of mobile station were worked differential surveying correction between mobile phones. Interface module system was received the same result of precision which was compared RF wireless modem system.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.80-86
• /
• 2009

TETRA is the standard of Digital Trunked Radio System developed by the ETSI(European Telecommunications Standards Institute). It is adopted as Electric Power IT Wireless Backbone Network in Korea. To use TETRA wireless network, TETRA modem is very necessary. In this paper, the performance measurements of modem and its results are analyzed according to traffics in TETRA network. In this paper, SDS type-4 transmission method is used in the transmission standards suggested by PEI(Peripheral Equipment Interface) of ETSI. Performance measurements are done by varying the data size and transmission interval. The data size is increased by 10 bytes from 10-byte to 140-byte, and it is measured 1,000 times for each transmission interval of 0.5, 1.0, and 1.5 seconds. MU-1000MD of Unimo is used for TETRA modem, and SwMI(Switching and Management Infrastructure) of Teltronic is used for switching system in this paper.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2205-2218
• /
• 1997

We implement the CARMA-M (Collision Avoidance Radio Multiple Access-Mobile) protocol and DMP (Data-radio Multiplex Protocol) with a client/server architecture for a wireless communication netowrk. These protocols support a data transfer function between a remote computer and a mobile portable computer with a wireless modem which are proposed by dataradio in U.S.A. With the review and analysis of the proposed protocol, the impelementation methods of DMP, CARMA-M and LLC to interface the protocols are presented. Moreover the FEC technique is added to find and correct the errors generated in communication. The simulation method of a wireless network using wires is also shown to verify the implemented protocols.