• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1619-1626
• /
• 2017

Electronic components that are used in high-level radiation environment require a semiconductor device having a radiation-hardened characteristic. In this paper, we proposed a radiation-hardened I-gate n-MOSFET (n-type Metal Oxide Semiconductors Field Effect Transistors) using a layout modification technique only. The proposed I-gate n-MOSFET structure is modified as an I-shaped gate poly in order to mitigate a radiation-induced leakage current in the standard n-MOSFET structure. For verification of its radiation-hardened characteristic, the M&S (Modeling and Simulation) of the 3D (3-Dimension) structure is performed by TCAD (Technology Computer Aided Design) tool. In addition, we carried out an evaluation test using a $Co^{60}$ gamma-ray source of 10kGy(Si)/h. As a result, we have confirmed the radiation-hardened level up to a total ionizing dose of 20kGy(Si).

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1927-1934
• /
• 2016

본 논문에서는 일반적인 실리콘 기반 n-MOSFET(n-type Metal Oxide Semiconductor Field Effect Transistor)의 절연 산화막 계면에서 방사선으로부터 유발되는 누설전류 경로를 차단하기 위하여 I형 게이트 n-MOSEFT 구조를 제안하였다. I형 게이트 n-MOSFET 구조는 상용 0.18um CMOS(Complementary Metal Oxide Semiconductor) 공정에서 레이아웃 변형 기법을 이용하여 설계되었으며, ELT(Enclosed Layout Transistor)와 DGA(Dummy Gate-Assisted) n-MOSFET와 같은 레이아웃 변형 기법을 사용한 기존 내방사선 전자소자의 구조적 단점을 개선하였다. 따라서, 기존 구조와 비교하여 반도체 칩 제작에서 회로 설계의 확장성을 확보할 수 있다. 또한, 내방사선 특성 검증을 위하여 TCAD 3D(Technology Computer Aided Design 3-dimension) tool을 사용하여 모델링과 모의실험을 수행하였고, 그 결과 I형 게이트 n-MOSFET 구조의 내방사선 특성을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1483-1490
• /
• 2021

Many studies are undertaken into nuclear power plants (NPPs) in preparation for accidents exceeding design standards. In this paper, we analyze the applicability of various wireless communication technologies as accident countermeasures in different NPP environments. In particular, a commercial wireless communication module (WCM) is investigated by measuring leakage current and packet error rate (PER), which vary depending on the intensity of incident radiation on the module, by testing at a Co-60 gamma-ray irradiation facility. The experimental results show that the WCMs continued to operate after total doses of 940 and 1097 Gy, with PERs of 3.6% and 0.8%, when exposed to irradiation dose rates of 185 and 486 Gy/h, respectively. In short, the lower irradiation dose rate decreased the performance of WCMs more than the higher dose rate. In experiments comparing the two communication protocols of request/response and one-way, the WCMs survived up to 997 and 1177 Gy, with PERs of 2% and 0%, respectively. Since the request/response protocol uses both the transmitter and the receiver, while the one-way protocol uses only the transmitter, then the electronic system on the side of the receiver is more vulnerable to radiation effects. From our experiments, the tested module is expected to be used for design-based accidents (DBAs) of "Category A" type, and has confirmed the possibility of using wireless communication systems in NPPs.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.85-90
• /
• 2013

본 논문에서는 본 연구실에서 제안된 Dummy Gate Assisted MOSFET을 이용하여 6bit SAR (Successive Approximation Register) ADC를 설계하였으며 이에 대한 대조군으로 Conventional MOSFET으로 동일한 회로를 설계하여 두 회로의 Co-60 Gamma Ray에 의한 누적방사선 영향을 비교 분석해 보았다. 설계된 SAR ADC는 Binary Capacitor DAC과 Dynamic Latch 형태의 Comparator 그리고 Logic으로 구성이 되었으며, 0.35um standard CMOS공정으로 제작되었다. 방사선 조사 후 Conventional MOSFET을 이용한 ADC는 정상동작하지 못하였지만, Dummy Gate Assisted MOSFET을 사용한 ADC는 방사선 조사 후 DNL은 0.7LSB에서 2.0LSB, INL은 1.8LSB에서 3.2LSB로 다소 증가하였으나 정상적인 A/D 변환이 가능하다는 것을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.306-309
• /
• 2007

PXLM(Phosphor based x-ray light modulator) has a combined structure by phosphor, photoconductor, and liquid crystal and it can realize x-ray image of high resolution in clinical diagnosis area. In this study, we fabricated a photoconductor and investigated electrical and optical properties to confirm application possibility of radiator detector of PXLM structure. As photoconductor, amorphous selenium(a-Se), which is used most in DR(Digital radiography) of direct conversion method, was used and for formation of thin film, it was formed as $20{\mu}m-thick$ by using thermal vacuum evaporation system. For a produced a-Se film, through XRD(X-ray diffraction) and SEM(Scanning electron microscope), we investigated that amorphous structure was uniformly established and through optical measurement, for visible light of 40 $0\sim630nm$, it had absorption efficiency of 95 % and more. After fabricated a-Se film on the top of ITP substrate, hybrid structure was manufactured through forming $Gd_2O_3:Eu$ phosphor of $270{\mu}m-thick$ on the bottom of the substrate. As the result to confirm electrical property of the manufactured hybrid structure, in the case of appling $10V/{\mu}m$, leakage current of $2.5nA/cm^2$ and x-ray sensitivity of $7.31nC/cm^2/mR$ were investigated. Finally, we manufactured PXLM structure combined with hybrid structure and liquid crystal cell of TN(Twisted nematic) mode and then, investigated T-V(Transmission vs. voltage) curve of external light source for induced x-ray energy. PXLM structure showed a similar optical response with T-V curve that common TN mode liquid crystal cell showed according to electric field increase and in appling $50\sim100V$, it showed linear transmission efficiency of $12\sim18%$. This result suggested an application possibility of PXLM structure as radiation detector.