• 한국재료학회지
• /
• 제3권3호
• /
• pp.310-315
• /
• 1993

P-type(100)Si Wafer 위에 400$\AA$의 Ta를 증착하여 열산화법으로 ${Ta_2}{O_5}$박막을 형성시킴 후 RTA후처리를 통하여 절연파괴전장 특성 개선을 이루고자 하였다. 유전상수에 미치는 RTA후처리의 영향은 미약하지만 절연파괴전장을 나타내었으나 결정화 온도 이하의 RTA온도에서는 절연파괴전장이 5.4MV/cm로 RTA효과가 크게 나타났다. 이러한 RTA효과는 RTA온도 $575^{\circ}C$에서 flat band voltage shift가 RTA 시간에 따라 변화가 없는 것으로 미루어 보아 RTA효과는 계면 변화에 의한 것이 아님을 알 수 있었으며, RBS 분석을 통하여 ${Ta_2}{O_5}$1박막의 치밀화에 의한 것임을 확인할 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 추계학술발표회
• /
• pp.58-58
• /
• 1996

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.138-142
• /
• 2000

Thin film $LiNbO_3$MFS (metal-ferroelectric-semiconductor) capacitor showed improved characteristics such as low interface trap density, low interaction with Si substrate, and large remanent polarization. This paper reports ferroelectric $LiNbO_3$thin films grown directly on p-type Si (100) substrates by 13.56 MHz RF magnetron sputtering system for FRAM (ferroelectric random access memory) applications. RTA (rapid thermal anneal) treatment was performed for as-deposited films in an oxygen atmosphere at $600^{\circ}C$ for 60sec. We learned from X-ray diffraction that the RTA treated films were changed from amorphous to poly-crystalline $LiNbO_3$which exhibited (012), (015), (022), and (023) plane. Low temperature film growth and post RTA treatments improved the leakage current of $LiNbO_3$films while keeping other properties almost as same as high substrate temperature grown samples. The leakage current density of $LiNbO_3$films decreased from $10^{-5}$ to $10^{-7}$A/$\textrm{cm}^2$ after RTA treatment. Breakdown electric field of the films exhibited higher than 500 kV/cm. C-V curves showed the clockwise hysteresis which represents ferroelectric switching characteristics. Calculated dielectric constant of thin film $LiNbO_3$illustrated as high as 27.9. From ferroelectric measurement, the remanent polarization and coercive field were achieved as 1.37 $\muC/\textrm{cm}^2$ and 170 kV/cm, respectively.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.370-375
• /
• 2001

PZT thin films (3500${\AA}$) ahve been prepared onto Pt/Ti/corning glass (1737) substrates with a RF magnetron sputtering system using Pb$\sub$1.50/(Zr$\sub$0.52/,Ti$\sub$0.48)O$_3$ ceramic target. We used two-step annealing techniques, PZT thin films were grown at a 300$^{\circ}C$ substrate temperature and then subjected to an RTA treatment. In case of 500$^{\circ}C$ RTA temperature show pyrochlore phase. The formation of Perovskite phase started above 600$^{\circ}C$ and PZT thin films generated (101) preferred orientation. As the RTA time and temperature increased, crystallization of PZT films were enhanced. The PZT capacitors fabricated at 650$^{\circ}C$ for 10 minutes RTA treatment showed remanent polarization 30 ${\mu}$C/$\textrm{cm}^2$, saturation polarization 42${\mu}$C/$\textrm{cm}^2$, coercive field 110kV/cm, leakage current density 2.83x10$\^$-7/A/$\textrm{cm}^2$, remanent polarization were decreased by 30% after 10$\^$9/ cycles.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.262-265
• /
• 2003

Radiofrequency thermal ablation (RTA) as one of the microwave hyperthermia is becoming the treatment of choice for small but inoperable tumors of the liver. In this paper, we designed the applicator composed of semi-rigid coaxial cable antenna with a ring slot for RTA. To optimize the maximum output of radiation at 2450 MHz, we simulated the antenna using Electromagnetic simulation tools Maxwell program and analyzed the return loss and the electric field $E_{tot}$ at the near-field region between the simulation results and measurement results. As a result, we obtained the return loss of -29.786 dB at 2450 MHz when the antenna was placed between two blocks of a pig's liver, and the measurement results agreed with the simulation results well. Therefore, this semi-rigid coaxial cable antenna with a ring slot can be used very usefully as the applicator for RTA.r RTA.A.

• 한국재료학회지
• /
• 제4권5호
• /
• pp.550-555
• /
• 1994

본 연구에서는 반응기체 $PaCl_5$ (99.99%)와 $N_2O$(99.99%)를 사용하여 PECVD법으로 P-type(100) Si기판위에 $Ta_2O_5$ 박막을 증착시킨후 RTA 후처리를 통하여 누설전류를 개선시키고자 하였다. 실험결과, 증착온도 증가에 따라 굴절율은 일정하게 증가하였고 $500^{\circ}C$에서 최대 증착속도를 보였다. 증착된 $Ta_2O_5$막의 FT-IR 분석결과 증착온도 증가에 따라 Ta-O bond peak intensity가 증가함을 알 수 있었으며, 누설전류 특정결과 증착온도가 증가함에 따라 누설전류값이 감소함을 알 수 있었다. 또한 증착된 $Ta_2O_5$막을 RFA방법을 이용하여 후처리 한 결과, as deposited 상태보다 누설전류가 감소함을 알 수 있었으며 이는 RTA처리후 AES와 FT-IR 분석을 통하여 $Ta_2O_5$막 내의 oxygen농도와 Ta-O bond peak intensity를 측정한 결과 RTA 후처리에 의하여 $Ta_2O_5$막내의 존재하는 O-deficient 구조들이 감소한 때문이었다.

• 대한금속재료학회지
• /
• 제47권1호
• /
• pp.44-49
• /
• 2009

본 연구에서는 2인치 ITO의 타깃으로 ITO박막을 성장시킨 후 RTA 처리로 인한 전기적, 광학적 특성의 변화를 조사하였으며, RTA 처리된 ITO 박막을 이용하여 플라즈마 응용 사인보드를 제작 및 구동하였다. RTA공정으로 열처리한 ITO는 투과도는 증가하며, 비저항은 감소함을 관찰하였으며, 투과도의 증가는 RTA로 인한 결정성의 증가로 인한 결과이고, 비저항의 감소는 결정성의 증가와 더불어 치환형 주석의 원자수가 증가하였다고 사료된다. ITO를 이용하여 사인보드 제작시 방전cell의 압력은 3-5 Torr가 적당함을 알 수 있었으며, 전극 간격을 조절하여 120 V 정도의 낮은 플라즈마 개시 전압을 갖는 플라즈마 응용 사인보드를 성공적으로 제작 할 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.83-88
• /
• 2005

The interface-states between the top silicon layer and buried oxide layer of nano-SOI substrate were developed. Also, the effects of thermal treatment processes on the interface-state distributions were investigated for the first time by using pseudo-MOSFETs. We found that the interface-state distributions were strongly influenced by the thermal treatment processes. The interface-states were generated by the rapid thermal annealing (RTA) process. Increasing the RTA temperature over $800^{\circ}C$, the interface-state density considerably increased. Especially, a peak of interface-states distribution that contributes a hump phenomenon of subthreshold curve in the inversion mode operation of pseudo-MOSFETs was observed at the conduction band side of the energy gap, hut it was not observed in the accumulation mode operation. On the other hand, the increased interface-state density by the RTA process was effectively reduced by the relatively low temperature annealing process in a conventional thermal annealing (CTA) process.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.399-402
• /
• 2007

The effects of heat treatment on the electrical properties of strained-Si/SiGe-on-insulator (SGOI) devices were examined. We proposed the optimized heat treatment processes for improving the back interfacial electrical properties in SGOI-MOSFET. By applying the additional pre-RTA (rapid thermal annealing) before gate oxidation step and the post-RTA after source/drain dopant activation step, the electrical properties of strained-Si channel on $Si_{1-x}Ge_x$ layer were greatly improved, which resulting the improvement of the driving current, transconductance, and leakage current of SGOI-MOSFET.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.453-455
• /
• 2004

The effect of rapid thermal annealing (RTA) treatment on the growth characteristics of CNTs was investigated. We observed that Ni catalyst film was agglomerated by RTA treatment, resulting in the formation of Ni nanoparticles. The well aligned CNTs were grown from the Ni nanoparticles by plasma enhanced chemical vapor deposition (PECVD). It is shown that the size and distribution of the nanoparticles depend mainly on the annealing temperature and initial thickness of the metal layer. Also, it was found that CNTs grown through optimal RTA treatment had the more improved field emission characteristics than those of as-grown CNTs.