• Archives of Pharmacal Research
• /
• v.18 no.3
• /
• pp.183-188
• /
• 1995

Polymeric reinforcement and coatings of alginate beads were carried out to control the release rate of drug from alginate beads. A poorly water-soluble ibuprofen (IPF) was selected as a model drug. A commercially available $Eudragit^{\circledR}$ RS100 was also used as a polymer. Effects of polymeric contents, the presence of plasticizers and amount of drug loading on the release rate of drug were investigated. The release rate of drug from alginate beads in the simulated gastric fluid did not occur within 2 h but released immediately when dissolution media were switched to the simulated intestinal fluid. No significant difference of release rate from polymer-reinforced alginate bead without plasticizers was observed when compared to plain (simple) beads. However, the release rate of drug from polymer-reinforced alginate beads was further sustained and retarded when aluminium tristearate (AT) as a plasticizer was added to polymer. However, polyethylene glycol 400 (PEG400) did not change the release rate of drug from alginate beads although PEG400 was used to improve dispersion of polymer and sodium alginate, and plasticize $Eudragit^{\circledR}$ RS100 polymer. The presence of plasticizer was crucial to reinforce alginate gel matrices using a polymer. As the amount of drug loading increased, the release rate of drug increased as a result of decreasing effects of polymer contents in matrices. The significantly sustained release of drug from polymer-coated alginate beads occurred as the amount of polymer increased because the thickness of coated membrane increased so that cracks and pores of the outer surface of alginate beads could be reduced. The sustained and retarded action of polymer-reinforced and coated beads may result from the disturbance of swelling and erosion (disintegration) of alginate beads. From these findings, polymeric-reinforcement and coatings of alginate gel beads can provide an advanced delivery system by retarding the release rate of various drugs.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.412-421
• /
• 2008

We observe simultaneous transmission of relay stations (RSs) allowed in current IEEE 802.16j draft standard for multi-hop relay networks may involve severe interference among the RSs, hence leading to throughput degradation. Allowing only 1/3 of the RSs to simultaneously transmit instead of 1/2 RSs as in the current draft standard reduces the interference but results in reduced throughput. To remedy this problem, we devise schemes to incorporate network coding at link-layer level (decode-and-forward) into the simultaneous transmission of RSs. Data movement is rearranged to maximize coding gain. Formula is derived to dictate exact movement of packets traveling between base station (BS) and mobile stations (MSs) via intermediate RSs. The frame structure in the current IEEE 802.16j draft standard does not allow broadcast needed for network coding. We devise a new frame structure which supports the broadcast. A new R-MAP (pointers to the burst data) is introduced to implement the broadcast. Since our new frame structure is used only for BS to RS or RS to RS communication, our schemes retain backward compatibility with legacy MSs based on IEEE 802.16e standard. Simulation based on simple configuration of RSs shows considerable improvement in terms of system throughput and round trip delay. For a 4-hop relay network with 1 BS and 4 RSs with symmetric traffic in uplink (UL) and downlink (DL), throughput is improved by 49% in DL and by 84% in UL traffic compared with IEEE 802.16j draft standard under the assumption that omni-directional antennae are used in BS and RSs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2014

This paper presents the implementation of a control system of pellet boiler using wood pellet as carbon neutral material. The system also has the additional features to provide remote controlling and monitoring based on home networking technology through either public switched telephone networks or mobile communication networks. It consists of three kinds of sub-modules; a main controller provides basic and additional features such as a setting of temperature, a supplying of wood pellet, a controlling of ignition and fire-power, and a removing of soot. The second is temperature controller of individual rooms which is connected to the main controller through RS-485 links. And interface modules with PSTN and mobile networks can support remote controlling and monitoring the functions. The test results under the heating area of $172m^2$ show a thermal efficiency of 93.6%, a heating power of 20,640kcal/hr, and a fuel consumption of 5.54kg/hr. These results are superior to those of the conventional pellet boilers. In order to obtain the such high performance, we newly applied a 3-step ignition flow, a flame detection by $C_dS$ sensor, and a fire-power control by fine controlling of shutter to our pellet boiler.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.3
• /
• pp.295-303
• /
• 2012

In this study, we compared the precipitable water vapor (PWV) data derived from the radiosonde observation data at Sokcho Observatory and the PWV data at Sokcho Global Positioning System (GPS) Observatory provided by Korea Astronomy and Space Science Institute, for the years of 2006, 2008, 2010, and analyzed the radiosonde seasonal, diurnal bias according to radiosonde sensor types. In the scatter diagram of the daytime and nighttime radiosonde PWV data and the GPS PWV data, dry bias was found in the daytime radiosonde observation as known in the previous study. Overall, the tendency that the wet bias of the radiosonde PWV increased as the GPS PWV decreased and the dry bias of the radiosonde PWV increased as the GPS PWV increased. The quantitative analysis of the bias and error of the radiosonde PWV data showed that the mean bias decreased in the nighttime except for 2006 winter, and in comparison for summer, RS92-SGP sensor showed the highest quality.

• Journal of Internet Computing and Services
• /
• v.11 no.3
• /
• pp.121-129
• /
• 2010

In recent years, Cloud computing is gaining much popularity as it can efficiently utilize the computing resources and hence can contribute to the issue of green IT. So to make the Cloud services commercialized, Cloud markets are necessary and are being developed. As the increasing numbers of various Cloud services are rapidly evolving in the Cloud market, how to select the best and optimal services will be a great challenge. In this paper we present a Cloud service selection framework in the Cloud market that uses a recommender system (RS) which helps a user to select the best services from different Cloud providers (CP) that matches his/her requirements. The RS recommends a service based on the QoS and Virtual Machine (VM) factors of difference CPs. The experimental results show that our Cloud service recommender system (CSRS) can effectively recommend a good combination of Cloud services to consumers.

• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1992

This study describes the design of the biophysiological signal processing analyzer which can collect and analyze the biosignal raw data. System hardware is consisted of the IBM PC AT. pre-amplifier. AID converter, Counter/Timer. and RS-232C processor. Biophysiological signal data were processed by the software digital filter. FFT and graphic processing routine. The tachogram and FFT of the the peak to peak interval time was accomplished by the Graphic user interface software using the biophysiological signal processed data. Using this system. the powerspectrum of the heart rate variability during the long term could be observed. Experimental results of this system approach our purpose. which is improved the cost performance. easy to use. reducing raw-data noise and optimizing model for digital filter.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.252-256
• /
• 2015

Nitrogen oxides ($NO_X$) was emitted from flue gas of stationary sources and exhaust gas of mobile sources, can leads to various environments problems. Selective Catalysts Reduction (SCR) is the most effective $NO_X$ removal system. Commercial $V_2O_5-WO_3/TiO_2$ catalysts, usually containing $V_2O_5$ 0.5~3 wt%, $WO_3$ 5~10 wt%, and $V_2O_5$ is active in the reduction of $NO_X$ but also in the desired oxidation of $SO_2$ to $SO_3$. To reduce the amount of vanadium, using graphene matrix supported vanadium to synthesize nanocomposite. Then, we fabricated to 1 inch honeycomb type of SCR catalysts adding graphene-vanadium nanocomposite. The chemical-physical characteristics and the catalytic activity were performed by XRD, XRF, BET and Micro-Reactor (MR). As a result, the De-NOX performance was showed, similar to the commercial catalyst activity as 77.8 % and using nanocomposite catalyst as 77.1 % at $350^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1051-1056
• /
• 2015

Aberrant expression of genes in de novo lipogenesis (DNL) pathway were associated with various cancers, including hepatocellular carcinoma (HCC). Single nucleotide polymorphisms (SNPs) of DNL genes have been reported to be associated with prognosis of some malignancies. However, the effects of SNPs in DNL genes on overall survival of HCC patients receiving transarterial chemoembolization (TACE) treatment are still unknown. In present study, nine SNPs in three genes (ACLY, ACACA and FASN) in DNL pathway were genotyped using the Sequenom iPLEX genotyping system in a hospital-based cohort with 419 HCC patients treated with TACE, and their associations with HCC overall survival were evaluated by Cox proportional hazard regression analysis under three genetic models (additive, dominant and recessive). Although we did not find any significant results in total analysis (all p>0.05), our stratified data showed that SNP rs9912300 in ACLY gene was significantly associated with overall survival of HCC patients with lower AFP level and SNP rs11871275 in ACACA gene was significantly associated with overall survival of HCC patients with higher AFP level. We further identified the significant interactions between AFP level and SNP rs9912300 or rs11871275 in the joint analysis. Conclusively, our data suggest that genetic variations in genes of DNL pathway may be a potential biomarker for predicting clinical outcome of HCC patients treated with TACE.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.2
• /
• pp.118-125
• /
• 2018

Tuberculosis (TB) is an infectious disease caused by Mycobacterium tuberculosis (MTB), but the genes associated with the host immune system can be attributed to the development of TB. The ITGB2 gene encodes the integrin beta 2 chain CD18 protein and is present on chromosome 21. The integrin beta 2 chain is an integrin expressed in leukocytes and plays a very important role in leukocyte maturation and attachment. ITGB2 plays an important role in the phagocytosis of MTB and the aggregation of leukocytes in MTB infections. This study examined the genetic polymorphisms of the ITGB2 gene between the TB case and normal control using Korean genomic and epidemiologic data. As a result, a statistically significant correlation was confirmed in 10 SNPs. The most significant SNP was rs113421921 (OR=0.69, CI: 0.53~0.90, $P=5.8{\times}10^{-3}$). In addition, rs173098, one of the significant 10 SNPs, is possibly located in a binding motif with the transcription factor cofactor p300, and can affect ITGB2 gene expression. These findings suggest that the pathogenesis of TB may be influenced by a range of genetic factors related to the immune function of the host, e.g., the reactions associated with the recruitment and attachment of leukocytes. The results of this study could be used to predict the infection control for tuberculosis in a patient-tailored manner.

• The Korean Journal of Quaternary Research
• /
• v.20 no.2
• /
• pp.1-10
• /
• 2006

Flooding hazard caused by natural and artificial environmental changes is closely associated with change in river bed configuration. This study is aimed at explaining a river-bed change related to soil erosion in the Keum river basin using GIS and RS. The USLE was used to compute soil erosion rate on the basis of GIS. River-bed profiles stretching from Kongju to Ippo were measured to construct a 3D-geomorphological map. The river-bed change was also detected by remote sensing images using Landsat TM during the period of 1982 to 2000 for the Keum river. The result shows that USLE indicates a mean soil erosion rate of $1.8\;kg/m^2/year$, and a net increase of a river-bed change at a rate of $+5\;cm/m^2$/year in the Kangkyeong area. The change in river-bed is interpreted to have been caused by soil erosion in the downstream of the Keum river basin. In addition river-bed change mainly occurred on the downstream of the confluence where tributaries and the main channel meet. Other possible river-bed change is caused by a removal of fluvial sand aggregates, which might have resulted in a net decrease of exposed area of sediment distribution between 1991 and 1995, while a construction of underwater structures, including a bridge, a reclamation of sand bars for rice fields and dikes, resulted in an increase of the exposed area of river-bed due to sediment accumulation.