• 한국표면공학회지
• /
• 제36권4호
• /
• pp.334-338
• /
• 2003

$BCl_3$고밀도 평판형 유도결합 플라즈마(High Density Planar Inductively Coupled Plasma)를 이용하여 AlGaAs와 InGaP의 건식식각에 대하여 연구하였다. 본 실험에서는 ICP 소스파워(0∼500 W), RIE 척 파워(0-150 W), 공정압력(5∼15 mTorr)의 변화에 따른 AlGaAs와 InGaP의 식각률, 식각단면 그리고 표면 거칠기 등을 분석 하였다. 또, 공정 중 OES(Optical Emission Spectroscopy)를 이용하여 in-situ로 플라즈마를 관찰하였다. $BCl_3$ 유도결합 플라즈마를 이용한 AlGaAs의 식각결과는 우수한 수직측벽도와(>87$^{\circ}$) 깨끗하고 평탄한 표면(RMS roughness = 0.57 nm)을 얻을 수 있었다. 반면, InGaP의 경우에는 식각 후 표면이 다소 거칠어진 것을 확인할 수 있었다. 모든 공정조건에서 AlGaAs의 식각률이 InGaP보다 더 높았다. 이는 $BCl_3$ 유도결합 플라즈마를 이용하여 InGaP을 식각하는 동안 $InCl_{x}$ 라는 휘발성이 낮은 식각부산물이 형성되어 나타난 결과이다. ICP 소스파워와 RIE 척파워가 증가하면 AlGaAs와 InGaP모두 식각률이 증가하였지만, 공정압력의 증가는 식각률의 감소를 가져왔다. 그리고 OES peak세기는 공정압력과 ICP 소스파워의 변화에 따라서는 크게 변화하였지만 RIE 척파워에 따라서는 거의 영향을 받지 않았다.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.775-778
• /
• 2003

We studied InP etching in high density planar inductively coupled $BCl_3$and $BCl_3$/Ar plasmas(PICP). The investigated process parameters were PICP source power, RIE chuck power, chamber pressure and $BCl_3$/Ar gas composition. It was found that increase of PICP source power and RIE chuck power increased etch rate of InP, while that of chamber pressure decreased etch rate. Etched InP surface was clean and smooth (RMS roughness <2 nm) with a moderate etch rate (300-500 $\AA$/min) after the planar $BCl_3$/Ar ICP etching. It may make it possible to open a new regime of InP etching with $CH_4$$H_2$-free plasma chemistry. Some amount of Ar addition (<50%) also improved etch rates of InP, while too much Ar addition reduced etch rates of InP.

• 접착 및 계면
• /
• 제4권4호
• /
• pp.15-21
• /
• 2003

친유기화 층상실리케이트의 함량을 0.25 wt%에서 9 wt%까지 변화시켜 가며 폴리설폰과 용액 블렌드하여 폴리설폰/친유기화 층상실리케이트 나노복합체를 제조하고, 필름으로 성형하였다. 제조된 폴리설폰/친유기화 층상실리케이트 나노복합체 필름은 XRD 및 TEM을 사용하여 박리여부를 확인하였다. 표면의 morphology 변화는 SEM 및 AFM을 통하여 확인하였다. 폴리설폰 수지에 소량의 층상실리케이트 첨가시에는 표면 조도의 변화가 크게 나타나지 않으나 1.5 wt% 이상의 함량을 첨가하면 삽입만 일어난 층상실리케이트에 의해 표면 조도가 커지는 것으로 보인다. 접촉각 측정을 통한 친유기화 층상실리케이트 함량에 따른 표면 장력의 변화도 1.5 wt%의 층상실리케이트 첨가량을 경계로 하여 변화하는 현상이 나타났다. 이는 층상실리케이트의 함량에 따른 분산 효과에 의해 표면에서의 분포와 배열에 기인하는 것으로 생각된다.

• 대한금속재료학회지
• /
• 제48권4호
• /
• pp.320-325
• /
• 2010

NiO thin films were deposited by radio frequency magnetron sputtering on glass substrates. The processing variables of the oxygen content, sputtering power, and pressure were varied to investigate the electrical properties and surface morphology of NiO films. It was found that the resistivity of NiO films at $1.22{\times}10^2{\Omega}cm$ (2.5% $O_2$ in Ar gas) was greatly reduced to$ 2.01{\times}10^{-1}$ ${\Omega}cm$ (100% oxygen) under a typical sputtering condition of 6 mTorr and 200 watts. In an effort to observe the resistivity variances, the sputtering power was varied from 80 to 200 watts at 6 mTorr with 100% $O_2$. However, the resistivity of the NiO films changed in the range of $10^{-1}-10^{-2}$ ${\Omega}cm$. The dependence on the sputtering power was therefore found to be weak in this experiment. When the sputtering pressure was changed from 3 to 60 mTorr at 200 watts with 100% $O_2$, the resistivity of the NiO films showed the lowest value of $5.8{\times}10^{-3}$ ${\Omega}cm$ at 3 mTorr, which is close to that of commercial ITO films (${\sim}10^{-4}$ ${\Omega}cm$). As the sputtering pressure increased, the resistivity also increased to 4.67 cm at 60 mTorr. The surface morphology of the NiO films was also checked by Atomic Force Microscopy. It was found that the RMS surface roughness values ranged from 0.6 to 1.5 nm and thtthe dependence on the sputtering parameters was weak.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.491-496
• /
• 2023

As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 ℃ The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.588-593
• /
• 2023

The advantage of OTFT technology is that large-area circuits can be manufactured on flexible substrates using a low-cost solution process such as inkjet printing. Compared to silicon-based inorganic semiconductor processes, the process temperature is lower and the process time is shorter, so it can be widely applied to fields that do not require high electron mobility. Materials that have utility as electrode materials include carbon that can be solution-processed, transparent carbon thin films, and metallic nanoparticles, etc. are being studied. Recently, a technology has been developed to facilitate charge injection by coating the surface of the Al electrode with solution-processable titanium oxide (TiOx), which can greatly improve the performance of OTFT. In order to commercialize OTFT technology, an appropriate method is to use a complementary circuit with excellent reliability and stability. For this, insulators and channel semiconductors using organic materials must have stability in the air. In this study, carbon-doped Mo (MoC) thin films were fabricated with different graphite target power densities via unbalanced magnetron sputtering (UBM). The influence of graphite target power density on the structural, surface area, physical, and electrical properties of MoC films was investigated. MoC thin films deposited by the unbalanced magnetron sputtering method exhibited a smooth and uniform surface. However, as the graphite target power density increased, the rms surface roughness of the MoC film increased, and the hardness and elastic modulus of the MoC thin film increased. Additionally, as the graphite target power density increased, the resistivity value of the MoC film increased. In the performance of an organic thin film transistor using a MoC gate electrode, the carrier mobility, threshold voltage, and drain current on/off ratio (I_on/I_off) showed 0.15 cm²/V·s, -5.6 V, and 7.5×10⁴, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.249-249
• /
• 2009

We have grown large area BSTO($(Ba_{1-x}Sr_x)TiO_3$) thin films (x=0.4) on 2 inch diameter MgO (001) single crystal substrates using a pulse laser deposition(PLD) system. Substrate temperature and oxygen pressure in the deposition chamber, and the laser optics for ablating a target have been controlled to obtain the uniform thickness and preferred orientation of the films. Results of x-ray diffraction and rocking curve analysis revealed that the BSTO films were grown on MgO substrates with a preferred orientation (002), and the full width half maximum of the rocking curve was measured to be 0.86 degree at optimum condition. Roughness of the films have been measured to be $3.42{\AA}$ rms by using atomic force microscopy. We have successfully deposited the large area BSTO thin films of $4000{\AA}$ thickness on 50 mm diameter MgO substrates.

• 한국광학회지
• /
• 제8권4호
• /
• pp.283-290
• /
• 1997

진공 증착법으로 수정 기판 위에 증착된 유전체 고반사 다층 박막의 산란을 TIS 방법을 이용하여 측정하였다. 기판온도 250~300.deg. C에서 증착한(Ta$_{2}$O$_{5}$/SiO$_{2}$) 다층 박막의 산란율은 0.048~0.050%이며 300.deg. C에서 4시간 열처리에 의하여 영향을 받지 않았다. 기판온도 250.deg. C에서 증착한 (TiO$_{2}$/SiO$_{2}$) 다층 박막의 산란율은 0.029%이며 열처리에 의하여 심한 인장 응력을 받았다. 두 다층 박막의 표면 거칠기는 거의 차이가 없었고 Ta$_{2}$O$_{5}$ 박막의 기둥이 TiO$_{2}$ 박막보다 작고 조밀도는 (Ta$_{2}$O$_{5}$/SiO$_{2}$) 다층 박막이 큰 것을 알 수 있었다. (Ta$_{2}$O$_{5}$/SiO$_{2}$) 다층 박막의 산란율이 큰 것은 Ta$_{2}$O$_{5}$ 박막이 더 조밀하고 기둥 크기가 작으므로 박막 내에 기둥 수가 증가하여 체적 산란이 증가하였기 때문인 것으로 판단된다. 것으로 판단된다.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.175-180
• /
• 2010

Transparent conducting oxide (TCO) films are widely used for optoelectronic applications. Among TCO materials, zinc oxide (ZnO) has been studied extensively for its high optical transmission and electrical conduction. In this study, the effects of $O_2$ plasma pretreatment on the properties of Ga-doped ZnO films (GZO) on polyethylene naphthalate (PEN) substrate were studied. The $O_2$ plasma pretreatment process was used instead of conventional oxide buffer layers. The $O_2$ plasma treatment process has several merits compared with the oxide buffer layer treatment, especially on a mass production scale. In this process, an additional sputtering system for oxide composition is not needed and the plasma treatment process is easily adopted as an in-line process. GZO films were fabricated by RF magnetron sputtering process. To improve surface energy and adhesion between the PEN substrate and the GZO film, the $O_2$ plasma pre-treatment process was used prior to GZO sputtering. As the RF power and the treatment time increased, the contact angle decreased and the RMS surface roughness increased significantly. It is believed that the surface energy and adhesive force of the polymer surfaces increased with the $O_2$ plasma treatment and that the crystallinity and grain size of the GZO films increased. When the RF power was 100W and the treatment time was 120 sec in the $O_2$ plasma pretreatment process, the resistivity of the GZO films on the PEN substrate was $1.05\;{\times}\;10^{-3}{\Omega}-cm$, which is an appropriate range for most optoelectronic applications.

• 한국정보통신학회논문지
• /
• 제21권3호
• /
• pp.578-584
• /
• 2017

PET (Polyethylene terephthalate) 플라스틱 기판 위에 IZTO (In-Zn-Sn-O) 박막을 증착하기 전에, $SiO_2$ 버퍼층을 전자빔 증착 방법으로 100 nm 의 두께로 증착하였다. IZTO 박막은 RF 마그네트론 스퍼터링법으로 RF 파워는 30~60 W 로, 공정 압력은 1~7 mTorr 로 변화시켜가며 $SiO_2$/PET 에 증착하여 IZTO 박막의 구조적, 전기적, 광학적 특성을 분석하였다. RF 파워 50 W 와 공정 압력 3 mTorr 에서 증착한 IZTO 박막이 $4.53{\times}10^{-3}{\Omega}$ 의 제일 큰 재료평가지수와 이때 $4.42{\times}10^{-4}{\Omega}-cm$ 의 비저항과 $27.63{\Omega}/sq.$ 의 면저항으로 가장 우수한 전기적 특성을 보였고, 가시광 영역 (400~800 nm) 에서의 평균 투과도도 81.24 % 로 가장 큰 값을 나타내었다. AFM 으로 IZTO 박막의 표면 형상을 관찰한 결과, 모든 IZTO 박막이 핀홀이나 크랙 같은 결함이 없는 표면을 가지며, RF 파워 50 W 와 공정 압력 3 mTorr에서 증착한 박막이 1.147 nm 의 가장 작은 표면 거칠기를 나타내었다. 이로부터 $SiO_2$/PET 구조위에 증착한 IZTO 박막이 차세대 플렉시블 디스플레이 소자에 응용될 수 있는 매우 유망한 재료임을 알 수 있었다.