• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.420-435
• /
• 2001

As multimedia technology has rapidly grown recently, many researches to process multimedia data efficiently using general-purpose processors have been studied. In this paper, we proposed multimedia instructions which can process multimedia data effectively, and suggested a processor architecture for those instructions. The processor was described with Verilog-HDL in the behavioral level and simulated with CADENCE$^{TM}$ tool. Proposed multimedia instructions are total 48 instructions which can be classified into 7 groups. Multimedia data have 64-bit format and are processed as parallel subwords of 8-bit 8 bytes, 16-bit 4 half words or 32-bit 2 words. Modeled processor is developed based on the Integer Unit of SPARC V.9. It has five-stage pipeline RISC architecture with Harvard principle.e.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.321-324
• /
• 2001

This paper describes a fast and low-power multiplier co-processor architecture for digital signal processing applications and real-time control systems and its use as a multiplier co-processor for a 32-bit RISC microprocessor utilizing its one of the 16 co-processor interfaces. Its architecture adopts various algorithms to reduce the dynamic power and the area as well. The designed multiplier performs 32$\times$32 bit multiplication, and was designed using verilog HDL and 0.35${\mu}{\textrm}{m}$, 3V, 4M CMOS standard cell library. Its target operating speed is 40MHz, area lower than 10000 gate counts, and 10mW/MHz of power.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.165-167
• /
• 2006

In this paper we present a new-generation sensor network processor which is not optimized in circuit level, but in system architecture level. The new design build on a conventional processor architecture, improving the design by focusing on application oriented specification, ISA, and micro-architectural optimization that reduce overall design size and advance energy-per-instruction. The design employs harvard architecture, 8-bit data paths, and an compact 19 bit wide RISC ISA. The design also features a unique interrupt handler which offloads periodical monitoring jobs from the main part of CPU. Our most efficient design is capable of running at 300 KHz (0.3 MIPS) while consuming only about few pJ/instruction.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.42-45
• /
• 2012

A network processor (NP) is an application-specific instruction-set processor for fast and efficient packet processing. There are many issues in compiler's code generation and optimization due to NP's hardware constraints and special hardware support. In this paper, we describe in detail how to resolve the issues. Our compiler was developed on LLVM 3.0 and the NP target was our in-house network processor which consists of 32 64-bit RISC processors and supports multi-context with special hardware structures. Our compiler incurs only 9.36% code size overhead over hand-written code while satisfying QoS, and the generated code was tested on a real packet processing hardware, called S20 for code verification and performance evaluation.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.185-194
• /
• 2017

In this paper, a modular platform for wearable devices is proposed which can be easily assembled by exchanging functions according to various field and environment conditions. The proposed modular platform consists of a 32-bit RISC CPU, a 32-bit symmetric multi-core processor, and a 16-bit DSP. It also includes a plug & play features which can quickly respond to various environments. The sensing and communication modules are connected in the form of a chain. This work is implemented in a standard 130 nm CMOS technology and the proposed modular wearable platforms are verified with temperature and humidity sensors.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.6
• /
• pp.167-174
• /
• 2022

PIPO lightweight block ciphers were announced in ICISC'20. In this paper, a single-block optimization implementation and parallel optimization implementation of PIPO lightweight block cipher ECB, CBC, and CTR operation modes are performed on a 32-bit RISC-V processor. A single block implementation proposes an efficient 8-bit unit of Rlayer function implementation on a 32-bit register. In a parallel implementation, internal alignment of registers for parallel implementation is performed, and a method for four different blocks to perform Rlayer function operations on one register is described. In addition, since it is difficult to apply the parallel implementation technique to the encryption process in the parallel implementation of the CBC operation mode, it is proposed to apply the parallel implementation technique in the decryption process. In parallel implementation of the CTR operation mode, an extended initialization vector is used to propose a register internal alignment omission technique. This paper shows that the parallel implementation technique is applicable to several block cipher operation modes. As a result, it is confirmed that the performance improvement is 1.7 times in a single-block implementation and 1.89 times in a parallel implementation compared to the performance of the existing research implementation that includes the key schedule process in the ECB operation mode.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.651-654
• /
• 2005

In this paper, we designed ECC(Elliptic Curve Cryptographic) Processor with Bus-splitting mothod for embedded SoC. ECC SIP is designed by VHDL RTL modeling, and implemented reusably through the procedure of logic synthesis, simulation and FPGA verification. To communicate with ARM9 core and SIP, we designed SIP bus functional model according to AMBA AHB specification. The design of ECC Processor for platform-based SoC is implemented using the design kit which is composed of many devices such as ARM9 RISC core, memory, UART, interrupt controller, FPGA and so on. We performed software design on the ARM9 core for SIP and peripherals control, memory address mapping and so on.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.329-332
• /
• 2002

The traditional debug tools for chip tests and software developments need a huge investment and a plenty of time. These problems can be overcome by Embedded Debugger based the JTAG boundary Scan Architecture. Thus, the IEEE 1149.1 standard is adopted by ASIC designers for the testability problems. We designed the RED(Reusable Embedded Debugger) using the JTAG boundary Scan Architecture. The proposed debugger is applicable for not a chip test but also a software debugging. Our debugger has an additional hardware module (EICEM : Embedded ICE Module) for more critical real-time debugging.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.107-113
• /
• 2005

In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead HTTP(Hyper Text Transfer Protocol) web server, and the system which can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized For sensing the operation condition and change of vehicle the desired data is derived by interfacing ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle valve.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1563-1566
• /
• 2002

A 16-bit adiabatic datapath for micro-power RISC processor is designed. The datapath is composed of a 3-read and 1-write multi-port adiabatic register file and an arithmetic and logic unit. A four-phase clock generator is also designed to provide supply clocks fer adiabatic circuits and the driving capability control scheme is proposed. All the clock line charge on the capacitive interconnections is recovered to recycle energy. Adiabatic circuits are designed based on efficient charge recovery logic(ECRL) and are implemented using a 0.35 fm CMOS technology. Functional and energy simulation is carried out to show the feasibility of adiabatic datapath. Simulation results show that the power consumption of the adiabatic datapath including supply clock generator is reduced by a factor of 1.4∼1.5 compared to that of the conventional CMOS.