• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1235-1240
• /
• 2008

In this paper, we presented an active RFID system in 2.45GHz range including LNA, Mixer and gain block. And in this work, a link budget model for RFID applications are proposed. We describe the detailed design and implementation of our system. Our components in RFID system has features such as low Noise Figure, reliable energy budget, and standard compliance with ISO 18000-4. Our receiver is effective for development and evaluation of prototype applications because of the flexibility of the design hardware. So, our platform will be suitable for versatile item management applications.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.11-16
• /
• 2011

Information of freight tracking and tracing is one of core elements in logistics point of view. We can monitor the vehicle or vessel where freights are loaded and get the in-transit data via GPS. However, security problem exists after the shipments are unloaded. RFID is well utilized for securing the container which products are stuffed into. International standard organization sets relevant specification and e-seal appears to be at issue. The paper investigates current status of corresponding technology and proposes the policy for development of logistics industry.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.51-61
• /
• 2007

In this paper, Air-interface protocols of ISO 18000-6 Types and EPCglobal Classes applied to RFID system in UHF band are analyzed, and those anticollision algorithms are realized. Also, the each algorithm which improves the performance of standard protocol is proposed, and the performance is compared when clock period of link timing is a identical condition on $12.5{\mu}s$. As the result, when 500 tags exist simultaneously inside reader interrogation zone, the tag recognition performance of a standard protocol is better in preceding order of Class-1 Generation-1, Type B, Type A, Class-0 and Class-1 Generation-2. And also the performance of improved protocol is better in ascending order of Type B, Type A, Class-1 Generation-1, Class-0 and Class-1 Generation-2. Therefore, performance of tag recognition remarkably depends on the regulated clock period in the protocol and link timing between a reader and a tag.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.292-305
• /
• 2013

EPCglobal has proposed the EPC Sensor Network to efficiently integrate and interoperate the RFID and WSN technologies based on the international standard EPCglobal Network. However, it can not deal with the sensor data without EPS. Also, it does not provide enough management function for the sensor data only. This study proposes USN management system that can deal with these weaknesses of EPC Sensor Network. Not only that, it is suitable for the medical environment properly. In the medical environment, it is important for the medical information to be integrated and interconnected via the standard for medical data. This proposed USN management system is based on SIP-HL 7 and can send RFID and WSN data based on SIP(Session Initiation Protocol). It can be interconnected with the existing hospital information system and exchange the information. Also it can design and materialize SIP Interface based on HL7 that allows the medical information to be exchanged and sent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.12-18
• /
• 2013

In 2012, Woosik Bae proposed a DAP3-RS(Design of Authentication Protocol for Privacy Protection in RFID Systems) using the hash function and AES(Advanced Encryption Standard) algorithm to hide Tag's identification and to generates variable data in every session. He argued that the DAP3-RS is safe from spoofing attack, replay attack, traffic analysis and etc. Also, the DAP3-RS resolved problem by fixed metaID of Hash-Lock protocol using AES algorithm. However, unlike his argue, attacker can pass authentication and traffic analysis using by same data and fixed hash value on the wireless. We proposed authentication protocol based on AES algorithm. Also, our protocol is secure and efficient in comparison with the DAP3-RS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1459-1467
• /
• 2009

In this paper, we propose a novel method for improving the tag collection performance in active RFID systems by modifying the tag collection algorithm in the ISO/IEC 18000-7 standard. The proposed method enables to reduce the time slot size by reducing the response message size from the tag and to decrease the number of command messages from the reader throughout the tag collection process. This results in reducing the time required for tag collection and the battery consumption on tags by decreasing the total amount of messages. Via the simulation experiments, we evaluated the performance of the tag collection applied with the proposed method, compared with that of the basic tag collection complying with the standard. The simulation results showed that the proposed method could decrease the total amount of messages between the reader and tags dramatically and reduce the average tag collection time by 19.99% and 16.03% when the reader requested the additional data of 50 bytes and 100 bytes from the tags, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1419-1435
• /
• 2015

In this study an active RFID system of low power consumption is proposed, for which we improved the tag collection algorithm of ISO/IEC 18000-7 standard and significantly reduced the tag collection time. We classified the type of power consumption according to the operating mode of active RFID and proposed the method which can accurately estimate battery life time. By calculating the power consumptions of proposed and current methods, we can compare the battery life times of both methods. Through this analysis we can demonstrate the superiority of the proposed method in battery life time.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.90-99
• /
• 2009

This paper presents the implementation of RFID EPC global network educational system based on using 900MHz air interface between the reader and the active tag. The software of reader and the active tag is developed on embedded environment, and the software of PC controlling the reader is based on window OS operated as the server. The ATmega128 VLSI chip is used for the processor of the reader and the active tag. As the development environment, AVR compiler is used for the reader and the active tag of which the programming language is C. The visual C++language of the visual studio on the PC activated as the server is used for development language. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Finally the data written from the active tag's memory is sent to the PC via the reader as "read" operation and compare the received data with one already sent to the tag. Software implementation of 900MHz EPC global RFID educational system is done on the basis of these functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.279-286
• /
• 2010

RFID reader protocol is an interface between RFID readers and higher (host) such as RFID middlewares and applications. At present, reader protocols provided by vendors are different from each other and there are compatibility problems in environment using heterogeneous readers. In this paper, to solve this problem, an RFID reader which supports LLRP(Low Level Reader Protocol), a well-known standard reader protocol presented by EPCglobal is designed and implemented. It is designed with two modules and supports various interfaces for easy adaptation to various applications. The LLRP protocol is implemented over a embedded LINUX multi-thread environment. It not only supports almost all properties of LLRP, and is designed with flexible hardware/software architecture to meet various requirements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1049-1056
• /
• 2010

Recently RFID system has been adopted in various fields rapidly. However, we should solve the problem of privacy invasion that can be occurred by obtaining information of RFID Tag without any permission for popularization of RFID system. To solve these problems, There is the Ohkubo et al.'s Hash-Chain Scheme which is the safest method. However, this method has a problem that requesting lots of computing process because of creasing numbers of Tag. Therefore We, suggest SP-Division algorithm satisfied with all necessary security of Privacy Protection Scheme and decreased in Tag Identification Time in this paper. And this paper implemented it in time standard finding the first key among the data devided into each nodes. The length of Hash-Chain holds 1000, and the total number of SPs increases 1000, 2000, 3000, and 4000. Comparing tag identification time by the total number of SPs and the number of Nodes with single node, extending the number of nodes to 1, 2, 3 and 4, when the number of nodes is 2, 40% of Performance, when the number of nodes is 3, 56%, and when the number of nodes is 4, 71% is improved.