• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.28-34
• /
• 2010

In this paper, the transceiver for RFID reader using 13.56MHz as a carrier frequency and meeting International Standard ISO 14443 type A, 14443 type B and 15693 is presented. The receiver is composed of envelope detector, VGA(Variable Gain Amplifier), filter, comparator to recovery the received signal. The proposed automatic reference voltage generator, positive peak detector, negative peak detector, and data slicer circuit can adjust the decision level of reference voltage over the received signal amplitudes. The transmitter is designed to drive high voltage and current to meet the 15693 specification. By using inductor loading circuit which can swing more than power supply and drive large current even under low impedance condition, it can control modulation rate from 30 percent to 5 percent, 100 perccnt and drive the output currents from 5 mA to 240 mA depending on standards. The 13.56 MHZ RFID reader is implemented in $0.18\;{\mu}m$ CM08 technology at 3.3V single supply. The chip area excluding pads is $1.5mm\;{\times}\;1.5mm$.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.63-70
• /
• 2008

The authors, Tom Karygiannis of NIST, and Bernard Eydt, Greg Barber, Lynn Bunn, and Ted Phillips of Booz Allen Hamilton, wish to thank Steven Fick, Rick Korchak, Kate Remley, Jeff Guerrieri, Dylan Williams, Karen Scarfone, and Tim Grance of NIST, and Kenneth Waldrop and Beth Mallory of Booz Allen Hamilton. These individuals reviewed drafts of this document and contributed to its technical content. The authors would also like to express their thanks to several experts for their critical review and feedback on drafts of the publication. These experts include V.C. Kumar of Texas Instruments; Simson Garfinkel of the Naval Postgraduate School; Peter Sand of the Department of Homeland Security; Erika McCallister of MITRE; and several professionals supporting Automatic Identification Technology(AIT) program offices within the Department of Defense(DoD), especially Nicholas Tsougas, Fred Naigle, Vince Pontani, Jere Engelman, and Kathleen Smith. During the public comment period we received helpful comments from the following Federal Government agencies: the US Departments of Defense, Health and Human Services, Homeland Security, Labor, and State; the Office of the Director of National Intelligence; the Office of Management and Budget; and the General Services Administration. We also received several helpful contributions from commercial industry, including comments from EPCglobal, VeriSign, and Priway. Finally, the authors wish to thank the following individuals for their comments and assistance: Brian Tiplady, Daniel Bailey, Paul Dodd, Craig K. Harmon, William MacGregor, Ted Winograd, Russell Lange, Perry F. Wilson, John Pescatore, Ronald Dugger, Stephan Engberg, Morten Borup Harning, Matt Sexton, Brian Cute, Asterios Tsibertzopoulos, Mike Francis, Joshua Slob in, Jack Harris, and Judith Myerson.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.488-493
• /
• 2009

We developed a simple method to control the length of carbon nanotube array by using oxygen plasma etching. In this way, we could obtain a carbon nanotube with a uniform length (20, 30, 50, $70\;{\mu}m$), that was parallel to the substrate. Moreover, our growing method of carbon nanotube array gives a uniform diameter ~3.5nm, which is consistent with our previous results. Using the same etching method, we demonstrated the carbon nanotube radio frequency identification (RFID) antenna. The results could be useful for carbon nanotube applications such as flexible and transparent conductive films.

• Electronics and Telecommunications Trends
• /
• v.21 no.6 s.102
• /
• pp.168-178
• /
• 2006

본 논문은 기존의 정보가전 및 홈네트워크 분야에서 사용되던 다양한 유.무선 기술들을 통합 및 연동하며, 센서 네트워크, RFID, IPv6 등의 새로운 기술들을 적용하여 디지털홈의 유비쿼터스 환경을 제공할 수 있는 다양한 홈네트워크 프레임워크 표준들을 살펴본다. 먼저 제 II장에서 이질적인 홈네트워크 시스템간의 상호 호환성을 확보하기 위해서 제안된 다양한 홈네트워크 프레임워크 표준들의 세부 구조를 살펴보고 제 III장에서 이러한 표준들의 개념 및 특성을 바탕으로 통합된 형태의 개방형 홈네트워크 프레임워크를 위한 요구사항들을 제안하고 각 홈네트워크 프레임워크의 특성을 바탕으로 앞으로의 진화방향을 살펴본 후 결론을 맺는다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.6
• /
• pp.335-344
• /
• 2011

The Tire Pressure Monitoring System(TPMS) is often used recently. However, the standards and functions are very different. Even though the regulation requires all vehicles install the TPMS, there is no a standard of a Physical and Media access control protocol which provides compatibility with other systems. In this paper, we propose a MAC protocol based on the international standard and an energy efficient hybrid RF system platform. The MAC protocol provides compatibility of the TPMS with other systems and the RF system platform reduces energy consumption significantly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1613-1620
• /
• 2011

CSD is IEEE Stan없rd 802.15.4b based Container Security Device which is proposed by the U.S Department of Home Security. It is mounted inside the container to sense opening of the container door. ConTracer is the CSD which is developed in this research whose major features are sensing door opening status as well as history inquiring on internal environment and shock to the container by mounting the temperature/humidity/shock sensors. Moreover, its RFID frequency bandwidth uses 2.4GHz 10 correspond actively to the radio regulations used by different countries. This. paper introduces the development trend of CSD, compares the ConTracer which is developed thru this research and other company's CSD, and introduces CSD System which is designed and established using ConTracer. Finally, the implemented CSD System is verified by applying the demonstration service to container distribution between Korea and Japan.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1993-1999
• /
• 2011

This paper describes a design of area-efficient/low-power cryptographic processor for HIGHT block cipher algorithm, which was approved as standard of cryptographic algorithm by KATS(Korean Agency for Technology and Standards) and ISO/IEC. The HIGHT algorithm, which is suitable for ubiquitous computing devices such as a sensor in USN or a RFID tag, encrypts a 64-bit data block with a 128-bit cipher key to make a 64-bit cipher text, and vice versa. For area-efficient and low-power implementation, we optimize round transform block and key scheduler to share hardware resources for encryption and decryption. The HIGHT64 core synthesized using a 0.35-${\mu}m$ CMOS cell library consists of 3,226 gates, and the estimated throughput is 150-Mbps with 80-MHz@2.5-V clock.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.125-128
• /
• 2011

This paper describes an efficient hardware implementation of HIGHT block cipher algorithm, which was approved as standard of cryptographic algorithm by KATS(Korean Agency for Technology and Standards) and ISO/IEC. The HIGHT algorithm, which is suitable for ubiquitous computing devices such as a sensor in USN or a RFID tag, encrypts a 64-bit data block with a 128-bit cipher key to make a 64-bit cipher text, and vice versa. For area-efficient and low-power implementation, we optimize round transform block and key scheduler to share hardware resources for encryption and decryption. The HIGHT64 core synthesized using a $0.35-{\mu}m$ CMOS cell library consists of 3,226 gates, and the estimated throughput is 150-Mbps with 80-MHz@2.5-V clock.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.753-759
• /
• 2006

Generally, the Wheeler cap method is used to measure the efficiency of small antennas. This method often gives an unreliable efficiency when the antenna has a complicated operating principle. However, if the high-order circuit model which more closely represents the input impedance of the antenna is used in Wheeler cap method, then more accurate efficiency can be achieved. In this paper, we propose a novel method that can build the high-order circuit model using transformer circuits with the genetic algorithm(GA). To efficiently reduce the searching space in the GA and improve the convergence of the GA process, we suggest a novel scheme that finds appropriate initial values. Finally we verify the proposed method by measuring the efficiency of some passive RFID tag antennas.

• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.285-293
• /
• 2010

To obtain visible and traceable information from the supply chain, HW/SW standards for the EPC global network, which process electronic product code (EPC) data read from Radio frequency identification (RFID) tags, are regarded as the de facto industry standard. Supply chain participants install information service systems and provide logistics information to partners by following the EPCglobal architecture framework. Although quality of service (QoS) is essential for providing dependable and scalable services as pointed out by Auto-ID Lab, only a few models for the performance analysis of QoS-related work have been developed in the context of EPC information service systems. Specifically, doing so allows alternative design choices to be tested in an easy and cost-effective manner and can highlight potential performance problems in designs long before any construction costs are incurred. Thus, in this study we construct a model of an EPC information service system for the purposes of performance analysis and designing a dependable system. We also develop a set of building blocks for analytical performance models. To illustrate how the model works, we determine the characteristics of an EPC information service system and then select a combination of these proven modeling concepts. We construct a performance model that considers the response time and shows how to derive meaningful performance values. Finally, we compare the analytical results to measurements of the EPC information service system.